Previous Page: IPXRTR-6.50-200: IPXCP negotiation failed to user_name terminated because node address range all used up.  Next Page: IPXRTR-6.50-202: Unable to load or locate a compatible IPX Fragmentation Layer module(IPXF.NLM). The IPX Address Mapping Gateway will continue to work. Parallel IPX Address Mapping Gateway usage may result in a slightly reduced performance when mappings are unknown.

IPXRTR-6.50-201: An attempt to create a new LSP failed because all 255 LSPs are full.The current LSP size of number bytes needs to be increased if possible.The maximum size that can be configured is equal to the smallest MTU size implemented on your network minus 30bytes.

Source:  IPXRTR-6.50

Explanation:  The number of LSPs needs to be increased. This will result in some servers or services being unavailable. The current LSP size of 512 bytes needs to be increased, if possible. The maximum size that can be configured is equal to the smallest MTU size implemented on your network minus 30 bytes.

Action:  Reconfigure using NIASCFG (choose NIASCFG > IPX > Expert Configuration Options) and try again.

  Previous Page: IPXRTR-6.50-200: IPXCP negotiation failed to user_name terminated because node address range all used up.  Next Page: IPXRTR-6.50-202: Unable to load or locate a compatible IPX Fragmentation Layer module(IPXF.NLM). The IPX Address Mapping Gateway will continue to work. Parallel IPX Address Mapping Gateway usage may result in a slightly reduced performance when mappings are unknown.