Previous Page: IPXRTR-6.50-201: An attempt to create a new LSP failed because all 255 LSPs are full.The current LSP size of number bytes needs to be increased if possible.The maximum size that can be configured is equal to the smallest MTU size implemented on your network minus 30bytes.  Next Page: IPXRTR-6.50-204: Incoming call rejected because the WAN client node address range was exceeded.

IPXRTR-6.50-202: Unable to load or locate a compatible IPX Fragmentation Layer module(IPXF.NLM). The IPX Address Mapping Gateway will continue to work. Parallel IPX Address Mapping Gateway usage may result in a slightly reduced performance when mappings are unknown.

Source:  IPXRTR-6.50

Explanation:  The IPXF.NLM could be corrupted.

Action:  Obtain a new IPXF.NLM (located with other Novell Internet Access Server 4.1 NLM programs) and try again.

  Previous Page: IPXRTR-6.50-201: An attempt to create a new LSP failed because all 255 LSPs are full.The current LSP size of number bytes needs to be increased if possible.The maximum size that can be configured is equal to the smallest MTU size implemented on your network minus 30bytes.  Next Page: IPXRTR-6.50-204: Incoming call rejected because the WAN client node address range was exceeded.