Source route packets enable you to determine the route a packet takes to reach its destination. This feature is disabled by default.
Log in to Novell Remote Manager, then click Configure TCPIP > Start TCP/IP Configuration > Configure TCP/IP.
To permit forwarding IP source route packets, set Forward Source Route Packets to Enabled.
Click Save.
The system displays a TCP/IP Configuration Successful message.
Click OK to return to the TCP/IP Configuration Menu window.
If you want these changes to take effect immediately, click Reinitialize Options.
Load INETCFG, then select Protocols > TCP/IP > Expert Configuration Options.
Select Forward Source Route Packets > Enabled.
Press Esc until you are prompted to save your changes, then select Yes.
Press Esc to return to the Internetworking Configuration menu.
If you want these changes to take effect immediately, select Reinitialize System > Yes.