The following includes messages from NE2000-NW.LAN.
026: On a NetWare 3.11 server, you must load LSLENH.NLM before you load MSM31X.NLM.
054: The board did not respond to the initialization command.
066-Adapter 1: The cable might be disconnected on the board.
067: The group bit in the node address override was cleared.
093: Cannot schedule interrupt time call back without an HSM routine.
025: You cannot load MSM31X on a NetWare 3.10 server.
026: On a NetWare 3.11 server, you must load LSLENH.NLM before you load MSM31X.NLM.
050: The board cannot be found.
051: Board RAM failed the memory test.
054: The board did not respond to the initialization command.
066-Adapter 1: The cable might be disconnected on the board.
067: The group bit in the node address override was cleared.
068: The local bit in the node address override was set.
071: The matching virtual adapter could not be found.
072: A resource tag is unavailable.
073: Unable to allocate memory.
074: The hardware interrupt cannot be set.
075: The MLID cannot be registered with the LSL.
076: The polling procedure cannot be added.
077: The event notification routine cannot be registered.
079: The MLID did not initialize MSMTxFreeCount.
086: The driver parameter block is too small.
087: The media parameter block is too small.
091: The hardware configuration conflicts.
092: Cannot schedule AES without an HSM routine.
093: Cannot schedule interrupt time call back without an HSM routine.
094: Cannot set hardware interrupt without an HSM routine.
095: Cannot add polling without an HSM routine.
200-Adapter 1: The board’s DMA did not complete the write.
223: The board must be placed in a 16-bit slot.
224: This board is configured as an NE1000.