47.0 NSS Messages

The following error messages apply to Novell® Storage Services™ (NSS).

NSS-X-70: Unknown failure during ownership assignment.

Source: NSS.NLM
Possible Cause: An internal error has occurred.
Action: Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-71: Unknown failure during ownership assignment.

Source: NSS.NLM
Possible Cause: An internal error has occurred.
Action: Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-72: Unknown failure during ownership assignment.

Source: NSS.NLM
Possible Cause: An internal error has occurred.
Action: Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-73: Unknown failure during ownership assignment.

Source: NSS.NLM
Possible Cause: An internal error has occurred.
Action: Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-74: Unknown failure during ownership assignment.

Source: NSS.NLM
Possible Cause: An internal error has occurred.
Action: Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-75: Unknown failure during ownership assignment.

Source: NSS.NLM
Possible Cause: An internal error has occurred.
Action: Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-402: The module name name is already in use.

Source: NSS.NLM
Explanation: There is a registration problem with an NSS module.
Possible Cause: A module might be corrupted.
Action: Install a new set of NSS NetWare Loadable Module™ (NLM) programs. Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-628: NSS unable to destroy VOLUME VERIFY process, pid=error code.

Source: COMN.NSS
Explanation: NSS tried to clean up some internal processes and could not remove a process.
Possible Cause: An internal error has occurred.
Action: Contact your Novell support provider.

NSS-X-629: Could not Flush Volume, Can’t Verify/Repair.

Source: COMN.NSS
Explanation: NSS could not flush caches out to disk.
Possible Cause: An internal error has occurred.
Action: Contact your Novell support provider.

NSS-X-665: Could not find DOS namespace while renaming deleted files to DELETED.SAV.

Source: COMN.NSS
Explanation: NSS could not find the namespace for a DOS file during purge.
Possible Cause: An internal error has occurred.
Action: This message is for informational purposes only.

NSS-X-820: Error mounting volume_name, status=error code.

Source: NWSA.NSS
Explanation: The NSS volume you specified cannot be mounted.
Possible Cause: An internal error has occurred.
Action: Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-821: Error mounting volume_name, status=error code.

Source: NWSA.NSS
Explanation: The NSS volume you specified cannot be mounted.
Possible Cause: An internal error has occurred.
Action: Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-1405: Error creating Maintenance process, no memory.

Source: ZLSS.NSS
Explanation: There is not enough memory to finish the rebuild process.
Action: Shut down other processes. Retry the operation.

NSS-X-1407: Error, Maintenance command not supported.

Source: ZLSS.NSS
Explanation: An internal error has occurred.
Action: Reload NSS. Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-1408: Error adding a purge log Entry, possibly due to MEDIA Errors.

Source: ZLSS.NSS
Explanation: An entry could not be added to the purge log file.
Possible Cause: The hard disk might be full.
Possible Cause: You might have a bad sector on your hard disk.
Action: Check your hard disk. Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-1429: Unable to initialize authentication information on the root directory of the volume volume_name, status=error code.

Source: ZLSS.NSS
Explanation: NSS tried to create an NSS volume.
Possible Cause: An internal error has occurred.
Action: Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-1437: Failed to queue a Read Request at volume block: volume_number file block: file_number on Volume volume_name.

Source: ZLSS.NSS
Explanation: NSS temporarily has no resources available, such as memory.
Possible Cause: An internal error has occurred.
Action: Retry the operation. If this is a write error, you may have to mount the volume. If this is a read error, you do not have to mount the volume. If the problem persists, contact your Novell support provider.

NSS-X-1438: Failed to queue a Read Request at volume block: volume_number file block: file_number on Volume volume_name.

Source: ZLSS.NSS
Explanation: NSS temporarily has no resources available, such as memory.
Possible Cause: An internal error has occurred.
Action: Retry the operation. If this is a write error, you may have to mount the volume. If this is a read error, you do not have to mount the volume. If the problem persists, contact your Novell support provider.

NSS-X-1450: Error reading Volume Data Block error code, status=error code.

Source: ZLSS.NSS
Explanation: NSS tried to read an NSS volume.
Possible Cause: An internal error has occurred.
Action: Check the status message and retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-1456: ZLSS Object Storage Consumer has failed to Unregister.

Source: ZLSS.NSS
Explanation: An NSS consumer could not unregister.
Possible Cause: An internal error has occurred.
Action: Contact your Novell support provider.

NSS-X-2001: Error getting value of Set Parameter: Auto Restart After Abend.

Source: DOSFAT.NSS
Possible Cause: DOSFAT cannot get the server’s settable parameter or failed to register the event with the server.
Action: Do not load DOSFAT.
Action: Set Auto Reset After Abend to 0.

NSS-X-2002: Error registering for EVENT_SET_PARAMETER_CHANGED.

Source: DOSFAT.NSS
Possible Cause: DOSFAT cannot get the server’s settable parameter or failed to register the event with the server.
Action: Do not load DOSFAT.
Action: Set Auto Reset After Abend to 0.

NSS-X-2201: Consumer Failed to accept a Storage Deposit ID.

Source: ZLSS.NSS
Explanation: An internal error has occurred.
Action: Reload NSS. Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-2208: Unable to add deposit to Storage Bank.

Source: ZLSS.NSS
Explanation: An internal error has occurred.
Action: Reload NSS. Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-2209: Unable to locate deposit to remove from the Storage Bank.

Source: ZLSS.NSS
Explanation: An internal error has occurred.
Action: Reload NSS. Retry the operation. If the problem persists, contact your Novell support provider.

NSS-X-2401: Consumer Failed to accept a Storage Deposit ID.

Source: ZLSS.NSS
Explanation: An internal error has occurred.
Action: Reload NSS. Retry the operation. If the problem persists, contact your Novell support provider.