C.2 August 2012 (OES 11 SP1)

Updates were made to the following sections. The changes are explained below.

C.2.1 Apache Web Server

Location	Change
Section 6.2.4, Requiring Strong Ciphers	Secure your web solution by requiring strong ciphers. In a text editor, modify the /etc/apache2/vhosts.d/vhost-ssl.conf file to require strong settings by placing a plus sign (+) before RSA, HIGH, and SSLv2 and exclamation marks (!) before the weaker ciphers as follows: # SSL Cipher Suite: SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:!MEDIUM:!LOW:+SSLv2:!EXP:!eNULL Restart Apache.

C.2.2 Converting NetWare 6.5 Clusters to OES 11

Location	Change
Section 4.1, Converting NetWare Cluster Nodes to OES (Rolling Cluster Conversion)	In Step 9.m, corrected text to read “SLES 11 patch channel”.
Section 4.4, Finalizing the Cluster Conversion	During the final conversion of the cluster from NetWare 6.5 SP8 to OES 11, all of the scripts for the NetWare nodes are deleted and are no longer available.

C.2.3 Novell CIFS

Location	Change
Section 9.0, Novell CIFS	If the cluster resource goes comatose on the Linux server, there might be a timing issue for loading Novell CIFS. Add a sleep command before the novcifs -add command.

C.2.4 Novell Storage Services Pools

Location	Change
Section 16.4, Using Antivirus Software for NSS and NCP Volumes on Linux	For information about using antivirus software for NSS volumes and NCP volumes on your OES servers, see McAfee Antivirus Requires Additional Configuration in the OES 11 SP3: Planning and Implementation Guide.

C.2.5 Planning the Cluster Conversion

Location	Change
Section 1.1, Supported Conversion Paths	The NetWare to Linux conversion is supported from NetWare 6.5 SP8 (with the latest patches applied) to OES 11 SP1 on the SUSE Linux Enterprise Server (SLES) 11 SP2 operating system.
Section 1.2, Supported Mixed-Mode Clusters	A mixed-mode cluster made up of NetWare 6.5 SP7 or earlier nodes and OES 11 nodes is not supported.
Section 1.4, Master-Election Algorithm	This section is new.

C.2.6 Planning the Conversion of Load and Unload Scripts

Location	Change
Section 3.4, Comparing Master IP Address Scripts	You can modify the Master IP Address only after the cluster conversion is finalized.
Section 3.6.3, File Access Protocol Commands for Monitor Scripts	This section is new.