Server Referral List

When a PXE device boots, it makes a broadcast request on the network for PXE services. The ZENworks® Proxy DHCP server novell-proxydhcp) responds to this request with information that includes the IP address of an imaging server where the device can send requests for assigned imaging work.

Because PXE devices can exist in an environment with both newer and older ZENworks systems running concurrently, the device can fail to determine its assigned imaging work if it cannot find the imaging server for its own ZENworks version.

In ZENworks Configuration Management, devices can exist in multiple Management Zones. It is essential that the PXE device contact PXE services assigned to its home zone so that it can correctly determine if there is any imaging work assigned to it. When there is only a single Management Zone, this is easy to do because all Proxy DHCP servers provide addresses to services that belong to the same zone. Any device can request imaging work from any imaging server in the same zone and get the same response.

The PXE device’s initial request for PXE services is sent as a broadcast to the network, and all Proxy DHCP servers respond with information pertaining to their respective zones (in ZENworks Configuration Management and ZENworks Linux Management) or Proxy DHCP servers in their trees (in older ZENworks versions using Windows* or NetWare® imaging servers). Because it is impossible to determine which Proxy DHCP server responds first (if multiple Proxy DHCP servers respond), or which server’s response is used by the device, it is impossible to ensure that each PXE device will contact servers in its home zone or tree.

For a ZENworks environment that has PXE services, the Server Referral List configuration section provides a method for getting PXE devices to connect with their proper imaging servers. Server referral lists are only used by PXE devices, and in ZENworks Configuration Management only one Management Zone needs to have an active Proxy DHCP server and server referral list. Because you can only have one referral list active in a network segment, if you have ZENworks Linux Management running with a referral list configured, you’ll need to disable the Proxy DHCP service for Linux Management. This allows the Configuration Management referral list to be used by all PXE devices.

A server referral list allows you to ensure that all devices contact their home zone or tree for device imaging work assignments. The list should contain the IP address of an imaging server in each known Management Zone or older ZENworks system’s tree. When a device requests device imaging work from a server, the server first determines if the device belongs to the same zone or tree as the server. If it does not, that server refers the request to each server in its server referral list until it finds the device’s home zone or tree. The device is then instructed to send all future requests to the correct novell-proxydhcp.

To configure a server referral list, complete the tasks in the following sections, as applicable:

Configuring Imaging Servers in the Server Referral List

To configure the List of Server IP Addresses and DNS Names list box, perform the tasks in the following table:

Task

Steps

Additional Details

Add a server to the server referral list

  1. In the List of Server IP Addresses and DNS Names field, specify the DNS name or IP address of a server that can host preboot operations, then click Add to place it into the list.

  2. Repeat as necessary to complete the list of servers in your environment capable of preboot operations.

You can add a range of IP addresses by typing the beginning IP address, type a space, a dash, another space, then type the ending IP address of the range. However, these are displayed as you typed them when you click Add; the addresses within the range do not separate into individual IP addresses in the list.

Edit a listed server

  1. Select a server in the list, then click Edit.

  2. In the Edit String dialog box, edit the IP address or DNS name that is displayed there, then click OK to save the changes.

 

Rearrange the order of the servers in the server referral list

  1. Select one server, then click either Move Up or Move Down.

  2. Repeat as necessary to arrange the order of the servers.

You cannot move multiple servers at one time.

Remove servers from the server referral list

  1. Select one or more servers, then click Remove.

You can use the Ctrl or Shift keys to select multiple servers to remove them from the list.

Configuring ZENworks Mixed Environment Imaging Servers

After you have specified all of the necessary servers in the server referral list, you must place certain files into the tftp directories of each ZENworks 7.x Imaging Server in the list in order for the referrals to work with those traditional ZENworks Imaging Servers.

Do one of the following:

Copy from ZENworks 10 Windows to ZENworks 7 NetWare or Windows

From the ZENworks 10 Windows Imaging Server, copy the following files:

Location

Files

install_path\novell\zenworks\share\tftp

memdisk

nvlnbp.sys

pxelinux.0

install_path\novell\zenworks\share\tftp\referral\zfd70

pxemenu.txt

z_auto100.cfg

z_maint100.cfg

z_zpdis100.cfg

z_zpen100.cfg

To the following directory on the ZENworks 7 NetWare or Windows Imaging Server:

NetWare: drive:\tftp

Windows: drive:\Program Files\ZEN Preboot Services\tftp\data

Do not replicate any directory structure from the ZENworks 10 server. Just copy the files to the tftp directory.

Copy from ZENworks 10 Windows to ZENworks 7 Linux

From the ZENworks 10 Windows Imaging Server, copy the following files:

Location

Files

install_path\novell\zenworks\share\tftp

memdisk

nvlnbp.sys

pxelinux.0

install_path\novell\zenworks\share\tftp\referral\zfd70

pxemenu.txt

z_auto100.cfg

z_maint100.cfg

z_zpdis100.cfg

z_zpen100.cfg

Copy the files to the following directory on the ZENworks 7 Linux Imaging Server:

/srv/tftp

Do not replicate any directory structure from the ZENworks 10 server. Just copy the files to the tftp directory.

Copy from ZENworks 10 Linux to ZENworks 7 NetWare or Windows

From the ZENworks 10 Linux Imaging Server, copy the following files:

Location

Files

/srv/tftp/

memdisk

nvlnbp.sys

pxelinux.0

/srv/tftp/referral/zfd70/

pxemenu.txt

z_auto100.cfg

z_maint100.cfg

z_zpdis100.cfg

z_zpen100.cfg

Copy the files to the following directory on the ZENworks 7 NetWare or Windows Imaging Server:

NetWare: drive:\tftp

Windows: drive:\Program Files\ZEN Preboot Services\tftp\data

Do not replicate any directory structure from the ZENworks 10 server. Just copy the files to the tftp directory.

Copy from ZENworks 10 Linux to ZENworks 7 Linux

From the ZENworks 10 Linux Imaging Server, copy the following files:

Location

Files

/srv/tftp/

memdisk

nvlnbp.sys

pxelinux.0

/srv/tftp/referrral/zfd70/

pxemenu.txt

z_auto100.cfg

z_maint100.cfg

z_zpdis100.cfg

z_zpen100.cfg

Copy the files to the following directory on the ZENworks 7 Linux Imaging Server:

/srv/tftp

Do not replicate any directory structure from the ZENworks 10 server. Just copy the files to the tftp directory.

For trademark and copyright information, see Legal Notices.