GroupWise 7 Support Pack 1

August 15, 2006

Updated October 5, 2007, with upgrade instructions for Open Enterprise Server 2 and SUSE® Linux Enterprise Server 10.

1.0 Overview

GroupWise® 7 Support Pack 1 provides enhancements for both administrators and end users.

For Administrators

  • On Linux*, SUSE Linux Enterprise Server 10 and SUSE Linux Enterprise Desktop 10 are now supported.

  • On Linux, installation in a Novell® Cluster Services cluster has been simplified.

  • On Linux, GroupWise can be installed on PolyServe* Matrix Server.

  • Improved global signatures enable administrators to more effectively meet business, legal, or regulatory mandates.

  • The new Gateway Alias Migration utility converts SMTP gateway aliases into preferred e-mail IDs.

  • The GroupWise Target Service Agent for File Systems (TSAFSGW) has been improved. On NetWare® and Linux, it can determine what types of GroupWise objects are available for backup based on the path you provide. In a NetWare cluster, it can identify and back up GroupWise data based on virtual server information, rather than physical server information.

  • The interactive tutorial in the Windows* client should reduce help desk calls. It also offers administrators additional training opportunities for their users from BrainStorm*, Inc., the Novell® official end-user training partner.

For End Users

  • GroupWise Windows client users should find the interactive tutorial helpful for setting up their Home views.

  • Cross-Platform client users will appreciate the additional features that have been added to the Cross-Platform client.

  • WebAccess client dial-up users in low-bandwidth environments will enjoy improved performance when using the many new, attractive, and efficient WebAccess features provided in GroupWise 7.

  • GroupWise users with customers, partners, and colleagues on other e-mail systems can now schedule meetings and receive accepted/declined statuses between systems, thanks to the availability of iCal support. Compatible e-mail systems include Microsoft* Exchange and Lotus* Notes*.

  • Outlook* Connector users can now access shared GroupWise Contacts folders from Outlook.

  • GroupWise users of mobile devices now have out-of-the-box synchronization capabilities.

2.0 GroupWise System Requirements

The system requirements for GroupWise 7 Support Pack 1 are essentially the same as those for GroupWise 7, with the following additional environments now supported:

  • SUSE Linux Enterprise Server 10

  • SUSE Linux Enterprise Desktop 10

  • PolyServe Matrix Server 3.1 on Linux

  • Mac OS X on Intel* (for the Cross-Platform client only, not the WebAccess client)

  • VMWare* ESX/GSX (for the agents and the clients)

Complete GroupWise system requirements are listed in the GroupWise 7 Installation Guide .

IMPORTANT:GroupWise system requirements do not apply to GroupWise Mobile Server. For GroupWise Mobile Server requirements, see the GroupWise Mobile Server Readme.

3.0 NetWare/Windows: Support Pack Installation

3.1 NetWare/Windows: Administration Software Installation Instructions

IMPORTANT:If you are installing the GroupWise software in a cluster, refer to the GroupWise 7 Interoperability Guide for cluster-specific installation instructions before starting to install the Support Pack.

  1. Download the NetWare/Windows GroupWise 7 SP1 Administration compressed executable file:

    • gw701e.exe for English only
    • gw701m.exe for multilingual

    to a temporary directory on your NetWare or Windows server.

  2. Extract the .exe file into a directory at the root of your local drive or to a network server drive that can handle long pathnames.

    The compressed file contains directory paths that could exceed DOS limits.

  3. In Windows, click Start > Run > Browse, then locate the directory where you extracted the SP1 administration files.

  4. Select the setup.exe file, then click OK to run the GroupWise Installation program.

  5. Click Create or Update a GroupWise System.

  6. Follow the on-screen instructions to create the GroupWise 7 SP1 software distribution directory and install the administration and agent software on your test system.

    Update the primary domain first. Start the MTA in the primary domain. Then update secondary domains, followed by the post offices in each domain. Start each MTA and POA for each domain and post office. Then update the other GroupWise agents.

    For additional instructions, refer to the GroupWise 7 Installation Guide on the GroupWise 7 Documentation Web site.

3.2 Windows: Client Software Installation Instructions

  1. Download the GroupWise 7 SP1 Windows Client compressed executable file to a temporary directory on your workstation:

    • gw701ce.exe for English only
    • gw701cm.exe for multilingual
  2. Extract the .exe file into a directory at the root of your local drive.

    The compressed file contains directory paths that could exceed DOS limits.

  3. In Windows, click Start > Run > Browse, then locate the directory where you extracted the SP1 client files.

  4. Select the setup.exe file, then click OK to run the GroupWise client Setup program.

  5. Follow the on-screen instructions to install the SP1 client software on your workstation.

4.0 Linux: Support Pack Installation

4.1 Linux: Operating System Update

If you are updating your version of Linux as well as updating GroupWise, perform the Linux operating system upgrade first. In addition, when you upgrade on a server where GroupWise WebAccess or Monitor is installed, you need to run a script that reconfigures the WebAccess Application or the Monitor Application for the new Apache and Tomcat configuration and directory structure.

4.1.1 Open Enterprise Server 1 to Open Enterprise Server 2

When you upgrade from Open Enterprise Server (OES) 1 to OES 2 with GroupWise installed on your OES server, you encounter package conflicts that must be resolved. A pop-up message appears immediately before the Installation Settings screen that informs you that the Delete Unmaintained Packages option is selected under Update Options. OES 2 considers GroupWise an “unmaintained package.” This means that, by default, your GroupWise software will be deleted as part of the upgrade process, unless you follow the instructions below.

  1. Read the pop-up warning carefully, then click OK to close the pop-up.

    The pop-up describes three possible actions you can take to resolve the GroupWise status as an unmaintained package. This procedure steps you through the second of the three possible actions. This alternative works most efficiently for preserving your GroupWise installation.

  2. When ConsoleOne® is installed on the server:

    The following message displays below the Packages link on the Installation Settings screen:

    Cannot solve all conflicts. Manual intervention is required.
    
    1. Click the Packages link.

      The upgrade process checks for package conflicts, then displays the following message:

      NOVLc1-1.3.6-1.i386 is locked and cannot be uninstalled.
      
    2. Select Keep NOVLc1, then click OK - Try Again.

      The upgrade process checks again for conflicts for NOVLc1 and displays one or more package-related warnings, providing you with alternatives for how to handle each conflict. The specific warnings you receive depend on the packages installed on the server you are upgrading. Therefore, warnings vary. Here are some examples:

      • NOVLc1-1.3.6-1.i386 cannot be installed due to missing dependencies.

      • novell-eguide-2.1.32.noarch cannot be installed due to missing dependencies.

      The messages fall into two categories of problems:

      • Missing dependencies for ConsoleOne (the NOVLc1 package)

      • Missing dependencies for some other product package besides ConsoleOne (for example, eGuide)

      The following steps help you decide which action to take for each type of message.

    3. If the message indicates missing dependencies for ConsoleOne (NOVLc1), select Ignore This Requirement Just Here.

    4. If the message indicates missing dependencies for some other product package besides ConsoleOne, and you are sure that you do not want that product package, select Delete package_name.

      WARNING:ConsoleOne is dependent on a variety of packages. Delete packages only when you are certain that they are not required by ConsoleOne. If in doubt, select Keep package_name.

    5. When you have selected an action for each conflict message, click OK - Try Again.

      The upgrade process checks again for conflicts for NOVLc1. Additional messages might be displayed for you to select actions to resolve the conflicts. This cycle repeats until all conflicts have been resolved, then you successfully reach the Packages page.

  3. On the Packages page, select Search in the Filter field.

  4. Search for the GroupWise packages that are installed on the server by typing the following in the Search field:

    novell-groupwise
    
  5. Click Search.

    Depending on what GroupWise components are installed on the server, the search results include some of the following packages:

    novell-groupwise-admin
    novell-groupwise-agents
    novell-groupwise-dbcopy
    novell-groupwise-gwcheck
    novell-groupwise-gwha
    novell-groupwise-gwia
    novell-groupwise-gwinter
    novell-groupwise-gwmon
    novell-groupwise-monitor
    novell-groupwise-webaccess
    
  6. Right-click the first GroupWise package in the list, then click All in This List > Keep.

    This changes the status of each GroupWise package from Delete to Keep.

  7. Search for the NOVLc1 package.

    The NOVLc1 and NOVLc1Linuxjre packages should be listed and marked as locked. This means that they will not be deleted.

  8. If these packages are marked with a Delete status, change their status to Keep.

  9. Click Accept on the Packages page.

  10. If you are presented with a font License Agreement, click Accept.

  11. Click Continue to return to the Install Settings page.

  12. Verify that the package conflict message is now gone from under the Packages link, then continue with the upgrade process.

  13. After you have finished the upgrade, reinstall the NDSbase RPM that was originally installed with ConsoleOne.

    The upgrade process removed it, but it is still needed by ConsoleOne.

    1. In a Linux terminal window, log in as root, then change to the directory where you originally extracted the ConsoleOne files.

    2. Change to the Linux subdirectory.

    3. Use the following command to reinstall the NDSbase RPM:

      rpm -ivh NDSbase-8.7.3.7-38.i386.rpm
      

If you encounter problems with GroupWise after you have upgraded from OES 1 to OES 2, see TID 3570778 in the Novell Knowledgebase for assistance.

4.1.2 SUSE Linux Enterprise Server 9 to SUSE Linux Enterprise Server 10

When you upgrade from SLES 9 to SLES 10 with GroupWise installed on your SLES server, you encounter package conflicts that must be resolved.

  1. When ConsoleOne is installed on the server:

    The following message displays below the Packages link on the Installation Settings screen:

    Cannot solve all conflicts. Manual intervention is required.
    
    1. Click the Packages link.

      The upgrade process checks for package conflicts, then displays the following message:

      NOVLc1-1.3.6-1.i386 is locked and cannot be uninstalled.
      
    2. Select Keep NOVLc1, then click OK - Try Again.

      The upgrade process checks again for conflicts for NOVLc1 and displays one or more package-related warnings, providing you with alternatives for how to handle each conflict. The specific warnings you receive depend on the packages installed on the server you are upgrading. Therefore, warnings vary. Here are some examples:

      • NOVLpkia-2.7.0-6.i386 is locked and cannot be uninstalled.

      • NOVLc1-1.3.6-1.i386 cannot be installed due to missing dependencies.

      The messages fall into two categories of problems:

      • A locked package

      • Missing dependencies for ConsoleOne (the NOVLc1 package)

      The following steps help you decide which action to take for each type of message.

    3. If the message indicates a locked package, select Keep package_name.

    4. If the message indicates missing dependencies for ConsoleOne (NOVLc1), select Ignore This Requirement Just Here.

    5. When you have selected an action for each conflict message, click OK - Try Again.

      The upgrade process checks again for conflicts for NOVLc1. Additional messages are displayed for you to select actions to resolve the conflicts. This cycle repeats until all conflicts have been resolved (approximately nine times), then you successfully reach the Packages page.

  2. On the Packages page, select Search in the Filter field.

  3. Search for the GroupWise packages that are installed on the server by typing the following in the Search field:

    novell-groupwise
    
  4. Click Search.

    Depending on what GroupWise components are installed on the server, the search results include some of the following packages:

    novell-groupwise-admin
    novell-groupwise-agents
    novell-groupwise-dbcopy
    novell-groupwise-gwcheck
    novell-groupwise-gwha
    novell-groupwise-gwia
    novell-groupwise-gwinter
    novell-groupwise-gwmon
    novell-groupwise-monitor
    novell-groupwise-webaccess
    
  5. Right-click the first GroupWise package in the list, then click All in This List > Keep.

    This changes the status of each GroupWise package from Delete to Keep.

  6. Search for the NOVLc1 package.

    The NOVLc1 and NOVLc1Linuxjre packages should be listed and marked as locked. This means that they will not be deleted.

  7. If these packages are marked with a Delete status, change their status to Keep.

  8. Click Accept on the Packages page.

  9. If you are presented with a font License Agreement, click Accept.

  10. Click Continue to return to the Install Settings page.

  11. Verify that the package conflict message is now gone from under the Packages link, then continue with the upgrade process.

  12. After you have finished the upgrade, reinstall the NICI RPM and the NDSbase RPM that were originally installed with ConsoleOne.

    The upgrade process removed them, but they are still needed by ConsoleOne.

    1. In a Linux terminal window, log in as root, then change to the directory where you originally extracted the ConsoleOne files.

    2. Change to the Linux subdirectory.

    3. Use the following commands to reinstall the RPMs:

      rpm -ivh nici-version-i386
      rpm -ivh NDSbase-version.i386.rpm
      

If you encounter problems with GroupWise after you have upgraded from SLES 9 to SLES 10, see TID 3570778 in the Novell Knowledgebase for assistance.

4.1.3 Updating the WebAccess Application and the Monitor Application after the Operating System Upgrade

When you upgrade your Linux operating system, OES 2 installs new versions of Apache and Tomcat by default. SLES does not; you must install them manually by following the procedure in this section. In addition, the GroupWise 7 installations of the WebAccess Application and the Monitor Application must be modified to accommodate changes made in Apache and Tomcat. The WebAccess/Monitor Update script takes care of this process for you. This script is available with TID 3624780 in the Support Knowledgebase.

  1. If you have upgraded to SLES 10, use YaST to install Apache and Tomcat if they were not already installed on SLES 9:

    1. Start YaST, then provide the root password.

    2. Click Software Management.

    3. In the Search field, type Apache, click Search, then select apache2 from the list.

    4. In the Search field, type Tomcat, click Search, then select tomcat5 from the list.

      Apache 2 was part of your SLES 9 installation, so it should have been automatically upgraded. Tomcat changed from Tomcat 4 to Tomcat 5, so unless Tomcat 5 was installed on SLES 9, Tomcat 5 needs to be installed.

    5. Click Accept.

    6. Follow the prompts to install the needed packages to your SLES 10 server.

    7. Exit YaST.

  2. Download the WebAccess/Monitor Update script from TID 3624780 in the Novell Support Knowledgebase to a convenient location on your Linux server.

  3. Change to the directory where you downloaded the script file.

  4. Give the script file execute permissions:

    chmod +x fixgwweb.sh
    
  5. Run the script.

    The script makes some slight reconfigurations of GroupWise files and directories that were originally set up when the WebAccess Application and the Monitor Application were installed on your previous version of Linux.

    • Apache 2: On OES 1 and SLES 9, Apache 2 used the mod_jk connector to facilitate communication between Apache and Tomcat. On OES 2 and SLES 10, Apache 2 uses the mod_proxy module instead. The WebAccess/Monitor Update script modifies the gw.conf file with this change. On SLES 10, the script also creates a symbolic link from /etc/opt/novell/gw/gw.conf to the new Apache 2 location of /etc/apache2/conf.d/gw.conf.

    • Tomcat 5: On OES 1 and SLES 9, the WebAccess /var/opt/novell/gw directory was linked to /var/opt/novell/tomcat4/webapps/gw. The script changes this link to /var/opt/novell/tomcat5/webapps/gw. For Monitor, the /var/opt/novell/gwmon directory now links to /var/opt/novell/tomcat5/webapps/gwmon.

  6. Start or restart Tomcat.

    OES 2:

    /etc/init.d/novell-tomcat5 restart
    

    SLES 10:

    /etc/init.d/tomcat5 start
    
  7. Start or restart Apache.

    OES 2:

    /etc/init.d/apache2 restart
    

    SLES 10:

    /etc/init.d/apache2 restart
    
  8. If you are upgrading to OES 2:

    You might receive the following message when starting Apache 2:

    Module "Jk" is not installed, ignoring.
    

    You can safely ignore this message, but if you want to eliminate it:

    1. Start YaST, then provide the root password.

    2. Click NetWork Services > HTTP Server.

    3. On the Server Modules tab, select the jk module in the list of services, then toggle the status to Off.

    4. Click Finish to save your change.

    5. Exit YaST.

You should now be able to run WebAccess and Monitor successfully on your upgraded Linux operating system.

4.2 Linux: Administration Software Installation Instructions

IMPORTANT:If you are installing the GroupWise software in a cluster, refer to the GroupWise 7 Interoperability Guide for cluster-specific installation instructions before starting to install the Support Pack.

  1. Download the GroupWise 7 SP1 Administration compressed tar file to a temporary directory on your Linux server:

    • gw701lnxe.tgz for English only
    • gw701lnxm.tgz for multilingual
  2. In a terminal window at your Linux server, change to the temporary directory, then use the following commands to uncompress and untar the downloaded file:

    tar -xz filename.tgz

    The result is a directory named gw701lnxe or gw701lnxm.

  3. Change to the new directory.

  4. Become root by entering sux and the root password.

  5. Use the following command to start the GroupWise Installation program:

    ./install

  6. Click Create or Update a GroupWise System.

  7. Follow the on-screen instructions to create the GroupWise 7 SP1 software distribution directory and install the administration and agent software.

    Update the primary domain first. Start the MTA in the primary domain. Then update secondary domains, followed by the post offices in each domain. Start each MTA and POA for each domain and post office. Then update the other GroupWise agents.

    When you use the Linux GroupWise Installation program to install a Support Pack, use the Install option to install the updated RPM for each agent. Typically, you do not need to use the Configure option after installing updated agent software, if the agent configuration has not changed since the previous installation. (For an exception to this procedure, see Section 7.3.1, Run Configure When Updating the Agents). If you encounter a problem starting the updated agent, use the Configure option to update the configuration information.

    For additional instructions, refer to the GroupWise 7 Installation Guide on the GroupWise 7 Documentation Web site.

4.3 Linux: Cross-Platform Client Software Installation Instructions

  1. Download the GroupWise 7 SP1 Client compressed tar file to a temporary directory on your Linux workstation:

    • gw701clnxe.tgz for English only
    • gw701clnxm.tgz for multilingual
  2. In a terminal window at your Linux workstation, change to the temporary directory, then use the following command to uncompress and untar the downloaded file:

    tar -xvzf filename.tgz

    The result is a directory with the directory structure root\image\2006.06.13\client\linux.

  3. Change to the root\image\2006.06.13\client\linux directory.

  4. Run the GroupWise Setup program to install the GroupWise Cross-Platform client software:

    ./install

  5. To start the Cross-Platform client after installation, click the GroupWise icon on your Linux desktop.

4.4 Macintosh: Cross-Platform Client Software Installation Instructions

  1. Download the GroupWise 7 SP1 Client file to a temporary directory on your Macintosh* workstation:

    • gw701cmace.dmg for English only; Mac OS X
    • gw701cmacm.dmg for multilingual; Mac OS X
    • gw701cmacie.dmg for English only; Mac OS X on Intel
    • gw701cmacim.dmg for multilingual; Mac OS X on Intel
  2. At your Macintosh workstation, browse to the file you downloaded.

  3. Double-click the file to install the GroupWise Macintosh client.

  4. To start the Cross-Platform client after installation, click the GroupWise icon on your Macintosh desktop.

5.0 Installation Issues

Installation issues for individual GroupWise components are located under the heading for each component.

5.1 General Installation Issues

5.1.1 Version Compatibility

If you install GroupWise on multiple platforms, or if you run multiple versions (for example, GroupWise 6.5 and GroupWise 7 in the same GroupWise system), refer to the GroupWise Version Compatibility appendix in the GroupWise 7 Installation Guide to make sure that the combinations you are using are supported.

For example, you cannot run a GroupWise 7 client against a GroupWise 6.5 or earlier post office. Earlier POAs cannot support later GroupWise clients. However, you can run a GroupWise 6.5 or earlier client against a GroupWise 7 POA.

Also, you cannot run the GroupWise 6.5 or earlier snap-ins to ConsoleOne® to access GroupWise 7 databases or eDirectory™ objects. You can use Admin Lockout Settings under Tools > GroupWise System Operations > System Preferences to specify the required version of the ConsoleOne snap-ins for each domain as needed.

5.1.2 GroupWise 7 Reinstallation

If you install GroupWise 7 components from a software distribution directory located on your local drive or a network drive and then try to update those components by installing from a CD, the installation fails by erroneously prompting for a disk:

Please insert the disk: 1

Uninstall the existing software, then install from the CD.

5.1.3 WebAccess and Monitor on the Same Web Server

The WebAccess Application, WebPublisher Application, and Monitor Application share a common library. If you are updating from an earlier GroupWise version and if you run these applications on the same Web server, you must update all three before any of them can work properly.

5.1.4 Web Clipping Application (PQA) Support with WebAccess and Monitor

Palm OS* devices are no longer supported in GroupWise 7. However, the Installation program still offers the opportunity to configure this feature. If you have been using a PQA in an earlier version of GroupWise, you can continue to do so, but it is no longer a supported feature.

5.1.5 Additional Installation Issues

Platform-specific installation issues are listed in separate sections below. Installation issues for individual GroupWise components are located under the heading for each component.

5.2 NetWare/Windows Installation Issues

5.2.1 Software Distribution Directory Dependency

When you create a new system and you are prompted for software to copy to the software distribution directory, select at least the agent and client software. The GroupWise Installation program launches the Agent Installation program and the Client Installation program. It currently must run those programs from the software distribution directory.

5.2.2 Problem Installing from a Windows XP Service Pack 2 Machine

When installing any GroupWise agent (Post Office Agent, Message Transfer Agent, Internet Agent, WebAccess Agent, Monitor Agent) to a NetWare server from a Windows XP machine where Service Pack 2 has been installed, you must have the Novell Client™ 4.90 SP2 or later installed on the Windows machine. If you have an earlier Novell Client, the GroupWise Installation program claims that it cannot find some of the directories to which you want to install software.

5.3 Linux Installation Issues

5.3.1 Linux Text-Based Installation Program Compatibility with ssh on Windows

The text-based GroupWise Installation program does not run on all Windows versions of ssh. An open source product named Putty that can be downloaded from the Internet free of charge is compatible with the text-based GroupWise Installation program.

5.3.2 Upgrading from an Incomplete Software Distribution Directory

Because all GroupWise components on a server must be updated at the same time, if you are installing GroupWise 7 from a software distribution directory that does not contain RPMs for all the components installed on the server, you receive the following error:

Install failed for an unknown reason (7)

The GroupWise 7 component cannot be updated because its RPM is not present in the software distribution directory. You can use the GroupWise 7 Administrator for Linux CD to update the server, then use Configure Administration to create a complete software distribution directory.

5.3.3 Moving a GroupWise 4.1 System from NetWare or Windows to Linux

The Update section of the GroupWise 7 Installation Guide provides instructions for moving from NetWare or Windows to Linux. If you are moving post offices and domains belonging to a GroupWise 4.1 system, you might need to manually rename the domain database ( wpdomain.db) from uppercase to lowercase, along with all .dc files. In addition, subdirectories in post office and domain directories might need to be renamed to lowercase.

6.0 Administration Issues

6.1 General Administration Issues

6.1.1 ConsoleOne Snap-In Version Compatibility

After a domain has been updated to GroupWise 7, do not administer that domain with earlier versions of the GroupWise snap-ins to ConsoleOne. Doing so could result in the unintentional creation of duplicate e-mail IDs.

The e-mail ID indexing scheme has been changed to allow the same e-mail ID to be used in different Internet domains within the same GroupWise system. This was prevented by the previous indexing scheme. Because the check for uniqueness now works differently, you must use the GroupWise 7 version of the ConsoleOne snap-ins when administering a GroupWise 7 domain to prevent the possibility of duplication.

6.1.2 Text Version of Global Signatures

In the original release of GroupWise 7, the text version of a global signature was generated automatically from the HTML version; you did not have any control over it. In GroupWise 7 SP1, you can display and edit the text version as well as the HTML version. If you created global signatures in the original version of GroupWise 7, you should verify that the text version is what you want and modify it as needed.

  1. In ConsoleOne, click Tools > GroupWise System Operations > Global Signatures.

  2. Select a global signature, then click Edit.

  3. Modify the text version as needed.

    For example, if the HTML version included an image, such as your company logo, you might want to add text to take the place of the image, such as the name of your company.

    Click OK to save your changes.

  4. Repeat this procedure for each global signature.

6.1.3 Images in Global Signatures

You might encounter a problem including an image file in a global signature if the path to the image is too long. This is a Java* problem. The easiest workaround is to move the image to a location with a shorter path. Another solution on Windows is to set the TMP environment variable to c:\temp before starting ConsoleOne.

6.1.4 Global Signatures and Flat Forwarding through the Internet Agent

If you enable global signatures, it disables flat forwarding through the Internet Agent because the signature is appended to each message. As an administrator, you must choose which is more important in your GroupWise system, global signatures or flat forwarding.

6.1.5 -601 SPI Exception Displays during Alias Migration

If the E-Mail Address field on the General page of a User object needs to be changed as a result of the information in the gateway alias, and if the User object cannot be found, a -601 SPI Exception displays and is written to the Alias Migration utility log file. This situation can arise when the association between the eDirectory object and the GroupWise object is broken for some reason. The association can be reestablished using Tools > GroupWise Utilities > GW / eDirectory Association > Associate Objects.

6.1.6 Server Names

When filling in a UNC Path field in ConsoleOne, you must specify the server name. You cannot use an IP address or DNS hostname.

6.1.7 Identity Manager Version Compatibility

Do not run an existing DirXML® or Identity Manager driver dated earlier than July, 2005, against a GroupWise 7 system.

GroupWise 7 requires the latest version of the GroupWise Identity Manager driver. Older drivers are not compatible. You can download the required version of the GroupWise driver from the Novell Identity Manager Patches Web site.

6.1.8 Server-Based Anti-Virus Software

If you run server-based anti-virus software, you should configure it so that it does not scan GroupWise directory structures such as domains and post offices where file locking conflicts can create problems for the GroupWise agents. If you need virus scanning on GroupWise data, check the GroupWise Partner Products page for compatible products.

6.2 NetWare/Windows Administration Issues

6.2.1 Directory Names and Filenames

All directory names in paths to GroupWise domains and post offices can consist of up to 8 characters.

Filenames can also consist of up to 8 characters, with extensions of up to 3 characters. Do not use long filenames for any files used by any GroupWise components. This requirement applies even to files that are not specific to GroupWise (such as SSL certificates and key files).

6.2.2 GWTSA and Duplicate Source Directories

The GroupWise Target Service Agent (GWTSA) handles situations where the same directory names are used on different volumes to back up by numbering the instances. For example:

Original GWTSA
GroupWise System/[Dom]Provo2:
GroupWise System/[Dom]Provo2:
Support Pack GWTSA
GroupWise System/1[DOM]Provo2:
GroupWise System/2[DOM]Provo2

Each instance is numbered and DOM is in all uppercase letters. After updating GWTSA with GroupWise 6.5 Support Pack 1 or later, you must re-create your backup jobs because the path has changed.

6.2.3 Quotas on NSS Volumes

If you use NSS volumes with quotas turned on, then you must turn on quotas on all GroupWise directories. Otherwise, you will receive No Disk Space errors.

6.2.4 TurboFat Compatibility

If you see E811 errors on the POA or the GroupWise client, a possible cause is that TurboFat is corrupting GroupWise database pointers. The solution is to turn off TurboFat.

  • To turn off TurboFat on NetWare 5. x servers, use turbodis.nlm.

  • To turn off TurboFat on NetWare 6. x servers, use tdis600.nlm.

These NLM™ programs disable TurboFat at startup.

6.3 Linux Administration Issues

6.3.1 NFS Not Supported

Because of long-standing file lock issues with NFS*, you cannot use an NFS mount to mount a server file system where your GroupWise system is located to a workstation where you are running ConsoleOne. We recommend using an SMB mount instead.

6.3.2 Pathnames and Filenames in Lowercase

All directory names in paths to GroupWise domains and post offices should consist of lowercase letters. Filenames should also consist of lowercase letters. There are no length restrictions.

6.3.3 Backup/Restore Area Path on Linux

When you set up a backup/restore area (Tools > GroupWise System Operations > Restore Area Management > Create) for a post office that is serviced by a Linux POA, put a Linux path in the UNC Path field. The contents of the Linux Path field are not currently being used.

6.3.4 Unavailable Administration Features

GroupWise 7 administration on Linux does not include the following features that are available in GroupWise 7 on NetWare and Windows:

  • Import/Export utility in ConsoleOne

  • Document Properties Management feature in ConsoleOne

7.0 Agent Issues

7.1 General Agent Issues

7.1.1 New View Files Now Overwrite Existing View Files

When you update the POA software, updated view files are copied to the software distribution directory but not to post offices. This maintains any customizations you might have made in the view files. When you use the Refresh Views option under Tools > GroupWise Utilities > System Maintenance in ConsoleOne, the post office view files are updated from the software distribution directory. If you have created custom view files with the same names as standard view files, you must create backup copies so that your customized view files are not lost in the refresh process. After you refresh the views, you must restore your customized view files to the post office.

7.1.2 POA Indexing Limitations

The POA’s QuickFinder™ indexing feature does not currently index PDF files or OpenOffice files.

7.1.3 Number of Client/Server Users Incorrect

On the Status page of the POA Web console, the C/S Users field might not display the correct number of users. Click the number, then return to the Status page to display the correct number of users.

7.1.4 SOAP Port Number Not Replicated by the Original GroupWise 7 ConsoleOne Administrator Snap-In

If you enabled SOAP in the original GroupWise 7 release, and if you changed the SOAP port number from its default of 7191, this information was not correctly replicated from the domain database to which ConsoleOne was attached to the post office database used by the POA for its configuration information. As a result, SOAP e-mail clients that relied on POA redirection ( ngwnameserver) were not able to connect to the proper POA unless the correct IP address and port number were provided when starting the client.

In GroupWise 7 SP1, successful POA redirection is critical to proper functioning of GroupWise Mobile Server. If you enabled SOAP in GroupWise 7 and changed the port number, you need to force the port number to replicate from the domain database to the post office database.

  1. Install the SP1 GroupWise Administrator snap-in to ConsoleOne.

  2. In ConsoleOne, browse to and right-click the POA object.

  3. Click GroupWise > Agent Settings.

  4. Deselect Enable SOAP, then click Apply.

  5. Select Enable SOAP, then click OK.

  6. Repeat this procedure for each POA in your GroupWise system.

By manually modifying the SOAP information, the SOAP information, including the port number, is written to the domain database and then properly replicated to the post office database so that redirection works properly for SOAP clients.

7.1.5 Evolution Compatibility with the POA and SOAP

Users might experience problems using Evolution™ to connect to their GroupWise mailboxes if they are using Evolution 2.6.0 or earlier. In addition, earlier versions of Evolution can cause high utilization on GroupWise servers. To encourage users to update to the latest version of Evolution, you can use the /evoversion switch to configure the POA to block versions of Evolution that are earlier than the specified version. For example, if you want the POA to block older versions of Evolution starting with 2.6.0, you would use the following switch:

NetWare and Windows:

/evoversion-2.6.1

Linux:

--evoversion 2.6.1

NOTE:In Support Pack 1, this switch blocks all versions of Evolution. It is currently designed for use on a post office where you want SOAP enabled but you do not want Evolution users to access the post office. Future versions of Evolution will return version information that will enable this switch to be more selective in allowing certain Evolution versions and not others.

7.2 NetWare/Windows Agent Issues

7.2.1 Potential CAP Port Conflict

By default, the POA uses 1026 for its CAP (Calendar Access Protocol) port. On some Windows 2000 servers, port 1026 is already used by the Windows Task Scheduler or other Windows service. If this occurs, configure the POA to use a different CAP port using the /capport switch in the POA startup file.

7.3 Linux Agent Issues

7.3.1 Run Configure When Updating the Agents

Normally, when you update your agent software with a Support Pack, you can use the Install Agents option in the GroupWise Installation program to install the updated agent software, but you do not need to use the Configure Agents option because your agents are already configured. However, in Support Pack 1, you should use Configure Agents after updating the agent software in order to obtain the updated grpwise script.

7.3.2 Non-root Agents on Open Enterprise Server for Linux Support Pack 2

On Novell Open Enterprise Server SP2, services such as IMAP and IMAP SSL, which require port numbers below 1025, cannot be initiated or restarted after the GroupWise agents are running as a non- root user. To initiate or restart those services, you must manually stop the services and then restart the GroupWise agents.

This also applies to SUSE® Linux Enterprise Server 9 SP3, the version of SUSE Linux that is bundled with OES SP2.

7.3.3 POA SOAP Protocol on Open Enterprise Server for Linux

On OES Linux SP1, the Linux POA does not currently support the SOAP protocol when running as a non- root user. However, it does support the SOAP protocol when running as root.

On OES Linux SP2, the Linux POA does support the SOAP protocol when running as a non- root user, as well as when running as root.

7.3.4 libXm.so.3 Error

If you try to start the Linux POA or MTA using the --show switch on a server where The X Window System* and Open Motif* are not running, you receive the following error:

libXm.so.3: cannot open shared object file
: no such file or directory

To resolve the error, start The X Window System and Open Motif before starting the POA or MTA with the --show switch. If you start the POA or MTA without the --show switch, you can use the agent's Web console to monitor the agent from your Web browser.

8.0 Client Issues

8.1 Windows Client Issues

8.1.1 Error Messages When You Install GroupWise Windows Client

If you install the GroupWise Windows client with Outlook XP already installed, an error message appears:

Either there is no default mail client or the current mail client cannot fulfil the messaging request. 
Please run Microsoft Outlook and set it as the default mail client.

In addition, if you open the Address Book, the GroupWise client crashes.

To fix the problem run win32\wms\nt\us\wms.exe from the GroupWise installation directory, then restart the client.

8.1.2 Error When Installing on Windows 2000

When installing GroupWise on a Windows 2000 operating system, you might receive the following error:

The dynamic link library MSVCP60.dll could not be found in the c:\path

To resolve the problem, install any other software before installing GroupWise. Although msvcp60.dll is installed with GroupWise, it is not detected on some systems.

8.1.3 Windows XP Service Pack 2

Installing Windows XP Service Pack 2 enables the Windows Firewall by default. The default Windows Firewall configuration blocks UDP (User Datagram Protocol). GroupWise is dependent on UDP for several key features such as listing new messages in your Mailbox, displaying notifications, and performing Busy Searches. To reconfigure the Windows Firewall so that it does not interfere with GroupWise functionality, follow the instructions in TID 10094089 in the Novell Support Knowledgebase.

8.1.4 Missing Global Signatures on Empty Messages

If you send a message with a subject only (no message body), a global signature is not appended. This is working as designed. The presence of a global signature on a message with an empty message body would prevent the Internet Agent /flatfwd switch from functioning correctly.

8.1.5 Limited iCal Interoperability with External Systems

GroupWise might not handle iCal attachments correctly if they are received from a non-GroupWise external system.

In particular, iCal appointments sent from non-GroupWise external systems (except Microsoft* Exchange) display as all-day appointments instead of All Day Events. Because of this, such appointments display in the Appointment pane instead of the All-Day-Events pane.

8.1.6 Can't Set a Primary Archive Computer

Currently there is no way to set one computer as a primary archive. This can result in multiple archives if you use GroupWise on different computers.

8.1.7 Can’t Administer Distribution Lists in Caching Mode

In Online mode, if you have been granted rights to modify a distribution list, you can edit that distribution list in the GroupWise Address Book. In Caching mode, you cannot edit the distribution list in the GroupWise Address Book. However, if you do into the Address Selector in a new message, you can administer the distribution list from there.

8.1.8 Screen Flickers When Scrolling a Message

If you use ClearType to smooth the edges of screen fonts and have an LCD display, your screen might flicker when scrolling in a text message.

8.1.9 Can't Switch Modes Using Microsoft Anti-Spyware

If you are using Microsoft's Anti-Spyware software, and you try to switch modes, GroupWise does not close. You must manually close GroupWise to switch modes.

8.1.10 Address Books Do Not Display in GroupWise When Installing GroupWise After Outlook 2003

The address books do not display in GroupWise if you install GroupWise for the first time after you have installed Outlook 2003. To resolve the problem, uninstall Outlook 2003 before you install GroupWise for the first time.

8.1.11 Notify Alarms Disappear for Appointments

After your account has been moved from one post office to another, your Notify alarms disappear for appointments. To get your Notify alarms back, you need to re-create all the alarms manually. For information on setting alarms for appointments, see the GroupWise client help.

8.1.12 Updated JAWS Script Available

Users of the JAWS* screen reader should install the new JAWS script available in GroupWise 7. Follow the instructions in the \client\jaws\gw_jaws_readme.txt file to install the JAWS script and other files on your workstation. This JAWS script includes Section 508 accessibility defect fixes that have occurred since the script was updated for GroupWise 6.5 Support Pack 3.

8.1.13 Spyware Detection Software Causes Installation to Not Work

If you have spyware detection software installed on your Windows computer, the GroupWise client for Windows might not install properly. Disable the spyware detection software before you install the GroupWise client for Windows.

8.1.14 VMWare and Proxy

If you run the GroupWise Windows client in a VMWare virtual machine, you might receive an 8503 error when you try to proxy to another user’s mailbox or display a Multi-User Calendar. To eliminate this problem, you need to disable the VMWare adaptors on your Windows workstation.

  1. Right-click My Network Places, then click Properties.

    In the list of LAN connections, you see one or more VMWare adapters.

  2. Right-click each adapter, then click Disable.

8.1.15 Word List Not Moved

With GroupWise 7.0.1, the default word list is now installed at c:\documents and settings\ user\Local Settings\Application Data\GroupWise\wt61us.uwl . Because of this GroupWise does not find previous versions of the word list. If you have added words to your word list you need to copy the word list from c:\wt61us.uwl to C:\documents and settings\ user\Local Settings\Application Data\GroupWise\wt61us.uwl .

8.2 Cross-Platform Client Issues

8.2.1 Items Forwarded from the GroupWise Connector for Outlook Do Not Open

If you receive an item that was forwarded from the GroupWise Connector for Outlook, the item does not open in the Macintosh version of the Cross-Platform client.

8.2.2 Running as root in Caching Mode

If you run the Cross-Platform client in Caching mode as root on Linux, you might encounter synchronization problems with your master mailbox when you next run as a regular user. If pending requests from the root session remain when you log in as a regular user, regular user requests get backed up behind the root requests, which cannot be processed while you are logged in as a regular user. To resolve any problems, run the client as root again so that all messages are synchronized, then run as a regular user thereafter to prevent further problems.

8.2.3 Mailbox Size Limits Not Recognized

The Cross-Platform client does not recognize the mailbox size limits set in ConsoleOne ( Tools > GroupWise Utilities > Client Options > Send > Disk Space Management).

8.2.4 Bold Not Displaying on Macintosh

If you have installed Microsoft Office or Internet Explorer on your Macintosh, new messages might not display as bold in your mailbox. To resolve the problem, disable your user fonts, which are typically duplicates of your system fonts, or update to JVM* 1.4.2 Update 1 or later.

8.2.5 Archiving Over the Network

Archiving with the Cross-Platform client can only be done to your local computer hard drive.

8.2.6 No Progress Bar Displayed When a Database Is Rebuilt

When prompted to rebuild your database, there is no progress indicator displayed during the rebuild process.

8.2.7 Focus Is in the Wrong Place When Creating a Reply on Macintosh

When you click Reply on Macintosh, you cannot just type the message. You must move the mouse cursor to the message body window of the reply message before you can start typing.

8.2.8 WebRenderer Not Available on Mac OS X on Intel

The improved rendering of HTML in the WebAccess client is not available on Mac OS X on Intel because the WebRenderer* product that has been incorporated into GroupWise is not yet available for Mac OS X on Intel.

9.0 WebAccess Issues

9.1 General WebAccess Issues

9.1.1 WebAccess 7 Compatibility with Older Versions of WebAccess

If you have more than one WebAccess Agent in your GroupWise system, you do not need to update all of them to GroupWise 7 at the same time. The GroupWise 7 WebAccess Application is compatible with older versions of the WebAccess Agent. However, users in post offices with an older default WebAccess Agent do not have all of the features available to users in post offices with a default GroupWise 7 WebAccess Agent. For more information, see Taking Advantage of Some of the New GroupWise 7 WebAccess Features While Still Running GroupWise 6.5.

9.1.2 WebAccess Compatibility with Virtual Office 1.5 and Earlier

If you access the WebAccess client through Virtual Office 1.5 or earlier, you might see the old WebAccess client interface rather than the new one. To resolve this problem, see TID 10098412 in the Novell Support Knowledgebase.

9.1.3 WebAccess Compatibility with Novell exteNd

Before GroupWise 7, WebAccess stored its default user interface files in the following directory on the Web server:

tomcat_root/webapps/gw/WEB-INF/classes/com/novell/webaccess/ templates/frames

In GroupWise 7, the user interface files are stored in the css subdirectory of templates rather than the frames subdirectory.

If you have exteNd™ portlets configured to use WebAccess, you must copy some of the exteNd template files from the frames directory into the css directory. Refer to the Novell exteNd documentation to determine which exteNd template files you should copy to the css directory.

IMPORTANT:Do not copy the entire contents of the frames directory into the css directory; this would damage the new GroupWise 7 WebAccess user interface.

In addition, modify the WebAccess URL in the exteNd Portal Preferences from:

http:// Web_server_address/servlet/webacc

to:

http:// Web_server_address/gw/webacc

9.1.4 Browser Cache Issue

After the WebAccess software has been updated, users’ browsers may pull old WebAccess files from the local cache rather than using the updated files that have just been installed. The results are unpredictable, including not being able to compose an item, reply, and so on. To resolve such problems, users need to clear the browser cache and then log in to the WebAccess client again.

9.1.5 Login Page Reappears after Successful Login

If the WebAccess login page appears in one or more of the frames (for example, the Folder list or the Item list) after a WebAccess user has successfully logged in, the user is probably accessing WebAccess through one or more proxy servers.

To prevent this problem:

  1. In ConsoleOne, right-click the WebAccess Application object (GroupWiseWebAccess), then click Properties.

  2. Click Application > Security, then deselect Use Client IP in Securing Sessions.

    For information about this option, click Help on the Environment page.

  3. Click OK to save the change.

9.1.6 “Login Is Not Current” Error

If you are already logged in to the WebAccess client and you try to log in again without logging out first, you receive the “ Login In Not Current” error. This is working as designed for security reasons.

9.1.7 Pop-Up Blocker Issue

Very occasionally, a pop-up blocker can prevent you from opening messages in the WebAccess client. If this happens, you can turn off the pop-up blocker or use a different one. Many pop-up blockers are available.

9.1.8 Recommendation for Tomcat Memory Allocation (Heap Size)

If you are using the Tomcat servlet engine with GroupWise WebAccess, the maximum memory allocation (heap size) for Tomcat should be at least 128 MB. The maximum memory allocation is set by using the -Xmx parameter when starting Tomcat (for example, -Xmx128m).

9.1.9 Preventing Web Server Directory Browsing

If your Web server is configured to allow directory browsing, it is possible for a user to access the /com directory of your Web server and browse downward from there. There is no confidential information located in any of the directories that are accessible in this manner.

However, if you want to prevent access, you can change the configuration of your Web server. For example, if you are using Apache, you can modify the httpd.conf file to remove the access that is provided by default. Locate the section that provides directory options for the htdocs directory. Either remove the Indexes option from the Options directive or place a minus (-) in front of it. Restart Apache to put the change into effect.

9.1.10 Preventing Unauthenticated Template Access

Under certain very specific circumstances, it is possible for a user to view WebAccess template files from a Web browser without logging in to WebAccess. There is no confidential information located in any of the template files that are accessible in this manner.

Starting with GroupWise 6.5 Support Pack 4, a line was added to the webacc.cfg file to prevent such access:

Templates.requireAuthentication=true

With this setting, unauthenticated users have no access to any WebAccess template files except for the Login page. If you have customized WebAccess templates for your own specialized use, this setting causes your templates to be inaccessible, even if GroupWise authentication was not previously required. You can turn off the authentication requirement by changing the line in the webacc.cfg file to:

Templates.requireAuthentication=false

9.1.11 Updates to WebAccess Templates

If you have created your own customized versions of the WebAccess send.inc and msgitem.htt templates, you need to make the following changes to these files in order for them to be compatible with GroupWise 7:

  • Do not use the Url.Item.Reply.to and Url.Item.Reply.cc variables to pass and post names in a reply message's To and CC fields. Instead, use Item.toFullID and Item.ccFullID (or Item.toName or Item.ccName).

  • When issuing an Item.Read action for a reply, set the Item.Reply parameter to either “sender” (to reply only to the sender) or “all” (to reply to all).

9.1.12 GroupWise 6.5 Frame Templates No Longer Supported

In GroupWise 7, the GroupWise 6.5 frame template files were still included in the GroupWise 7 software image. Some users for whom the GroupWise 7 WebAccess client performance was unacceptably slow returned to using the GroupWise 6.5 frame template files in their GroupWise 7 WebAccess installations.

Because the performance issues in the WebAccess client have been resolved in GroupWise 7 SP1, the Installation program does the following when you install the SP1 WebAccess software:

  • Deletes the frames entry from the user interfaces list (ConsoleOne > WebAccess Application object > Application > Templates > Define User Interfaces).

  • Resets the default user interface to Standard HTML using the css templates.

  • Moves the GroupWise 6.5 template files into a backup directory.

  • Installs the new css template files to the templates directory of your Web server.

If you were using the GroupWise 6.5 frame templates with your GroupWise 7 installation, please do not continue to do so.

9.1.13 All-Day Events on a Wireless Device

If you create and send an all-day event from your wireless device, it displays as a one-minute appointment in the GroupWise Calendar.

9.1.14 “The Page Cannot Be Displayed” Error

On older versions of Internet Explorer, users might receive this message after the WebAccess software has been updated. See TID 10081268 in the Novell Support Knowledgebase for instructions to correct the problem. Update to the latest version of Internet Explorer to avoid the problem.

9.1.15 Blank WebAccess Address Book on Internet Explorer

On Internet Explorer, when you exit from Address Book Options in the WebAccess Address book, the Address Book page might be blank. Press F5 (Refresh) to redisplay the Address Book.

9.1.16 Folder List Expansion Problem in Safari on Macintosh

In Safari* on Macintosh, if you expand the folder list in the left panel to the point where the last folder in the list expands beyond the bottom of the page, the message list disappears from the right panel where it belongs and repositions in the right corner of the folder panel on the left.

To resolve the problem immediately, collapse the folder list so that it no longer extends beyond the bottom of the page, then log out of the WebAccess client and log back in again. To resolve the problem permanently, create a folder at the bottom of the folder list that does not have subfolders and therefore does not expand.

9.1.17 Document Viewer Agent Cache Compatibility

The cache created by the Document Viewer Agent is not compatible with the cache previously used with WebPublisher. Old WebPublisher cache directories should be removed from servers where the Viewer Agent is installed.

9.1.18 Document Viewer Agent /template Switch

The Document Viewer Agent startup file ( gwdva.dva) lists a /template startup switch that is not yet implemented.

9.2 NetWare/Windows WebAccess Issues

9.2.1 WebAccess Installation Error on Windows Workstations

If you receive an error during installation indicating that the nvweb.dll file cannot be found, update the workstation to the latest Novell Client. The Novell Client is available for download from the Novell Downloads Web site.

9.2.2 WebAccess Service Fails to Start on Windows Servers

If you install the WebAccess Agent as a Windows service, reboot the server, and then do a workstation login as an Administrator, the WebAccess Agent service might fail to start. If this occurs, update to the latest Novell Client. The Novell Client is available for download from the Novell Downloads Web site.

9.2.3 Novell iManager Compatibility on Windows

If WebAccess and Novell iManager are installed on the same Windows 2000/2003 server, iManager might stop working. Because WebAccess installs and configures its own Tomcat and Jakarta connector, it is preferable to install it on a server where Tomcat is not already in use.

9.2.4 WebAccess Stops Responding on NetWare

WebAccess might stop responding for a period of time on NetWare. It might resume operation or it might not. To resolve this problem, update to the latest WINSOCK patch available in TID 2973892 in the Novell Support Knowledgebase.

9.2.5 GroupWise 6.5 Upgrade on NetWare

If the GroupWise 6.5 WebAccess Application is running on the server where you plan to install GroupWise 7 WebAccess, you should manually stop WebAccess, the Web server, and Tomcat before starting the GroupWise 7 installation. Under certain circumstances, the WebAccess Installation program cannot stop them for you.

9.2.6 New NetWare and Windows WebAccess URLs

Existing users of WebAccess are accustomed to accessing the following URLs on NetWare and Windows Web servers:

Web Services page:

Default index.html file of the Web server

WebAccess:

http://web_server_address/servlet/webacc

WebPublisher:

http://web_server_address/servlet/webpub

The WebAccess URLs on NetWare and Windows Web servers are now the same as the URLs used on Linux:

GroupWise-specific Web Services page:

http://web_server_address/gw/index.html

WebAccess:

http://web_server_address/gw/webacc

WebPublisher:

http://web_server_address/gw/webpub

To keep users' browser bookmarks from being broken, you should redirect the old URLs to the new URLs. Follow the instructions below for your Web server.

Apache

  1. Change to the conf subdirectory of the Apache root directory (for example, \apache2\conf.

  2. Edit the Apache configuration file for GroupWise.

    On NetWare 6, the Apache configuration file is gwapache.conf. On NetWare 6.5, the Apache configuration file is gwapache2.conf.

  3. Add the following line:

    redirect permanent /servlet/webacc http://web_server_address/
                                                                gw/webacc 
    
  4. If you use WebPublisher, add the following additional line:

    redirect permanent /servlet/webpub http://web_server_address/
                                                                gw/webpub 
    
  5. Save the file, then exit the editor.

  6. Restart Apache to put the redirections into effect.

Internet Information Server (IIS)

  1. Change to the inetpub\wwwroot subdirectory of the IIS root directory (for example, c:\inetpub\wwwroot)

  2. Create a subdirectory named servlet.

  3. Under the servlet subdirectory, create subdirectory named webacc.

  4. If you use WebPublisher, create a second subdirectory named webpub.

  5. In IIS Manager, expand the tree in the left pane to display Default Web Site under Web Sites.

    Under Default Web Sites, you should see the servlet subdirectory you created in Step 2.

  6. Expand the servlet subdirectory to display the webacc subdirectory (and optionally, the webpub subdirectory) that you created in Step 3.

  7. Right-click the webacc subdirectory, then click Properties.

  8. Click Directory, select A Redirection to a URL, then type /gw/webacc in the associated field.

  9. Select A Permanent Redirection for This Resource, then click OK to save your changes.

  10. If you use WebPublisher, repeat Step 7 through Step 9, using webpub in place of webacc.

  11. Restart the IIS Web server to put the redirections into effect.

Netscape Enterprise Server for NetWare

For redirection instructions, search the Novell Support Web site.

9.2.7 Web Server File Cleanup Because of a URL Change

As part of the change from /servlet/webacc to /gw/webacc, the WebAccess Installation program installs the WebAccess Application files into the servlet container ( gw) but it does not remove old servlet and htdoc files located under the ROOT container of the servlet and the Web server. Therefore, you might want to manually delete the following directories and files:

sys:\apache2\htdocs\com
sys:\apache2\htdocs\index.html (if customized for GroupWise)
sys:\apache2\htdocs\novell.html (if index.html was not customized)
sys:\tomcat\4\webapps\ROOT\WEB-INF\classes\com
sys:\tomcat\4\webapps\ROOT\WEB-INF\lib\ldapfilt.jar
sys:\tomcat\4\webapps\ROOT\WEB-INF\lib\ldapjdk.jar
sys:\tomcat\4\webapps\ROOT\WEB-INF\lib\njgwap.jar
sys:\tomcat\4\webapps\ROOT\WEB-INF\lib\njweb.jar
sys:\tomcat\4\webapps\ROOT\WEB-INF\lib\SpellServlet.jar
sys:\tomcat\4\webapps\ROOT\WEB-INF\web.xml

The one file you should definitely delete is web.xml, because might cause the WebAccess, WebPublisher, and Monitor Applications to run in both the old and new locations. Also, if you have customized the GroupWise template files, you should copy the contents of the template subdirectories under:

sys:\tomcat\4\webapps\ROOT\WEB-INF\classes\com\novell

to the corresponding templates subdirectories under:

sys:\tomcat\4\webapps\gw\WEB-INF\classes\com\novell

9.2.8 Problem Downloading Large Attachments

On NetWare 6.5 Support Pack 5, you might need to install a Winsock patch that enables users to download large attachments when they are using SSL connections to WebAccess.

9.2.9 Memory Problem

On NetWare 6.5 Support Pack 5, you might receive one of the following error messages on the server where the WebAccess Agent is running:

Server logical address space is running low ...
Short term memory allocator is out of memory ...
Cache memory allocator out of available memory ...

A patch for this problem is available in TID 2973639 in the Novell Support Knowledgebase.

9.2.10 Security Issue with WebAccess and Internet Explorer 5.0

When using Internet Explorer 5.0 to view messages through WebAccess, URLs to messages become part of the History cache and can be read by other users who have access to the same workstation. For solutions to this problem, see TID 10056452 in the Novell Support Knowledgebase.

9.2.11 Viewer Agent Issues on NetWare

  • On NetWare, the Viewer Agent requires at least 1 GB of memory for running about 5 worker processes. By default, 5 processes are started.

  • On NetWare, you must install the latest Support Pack for your version of NetWare in order to have the correct version of clib.nlm.

  • On NetWare, Memory Protection Fault Cleanup must be set to On in order for the Viewer Agent worker processes to recover successfully when a document fails HTML conversion.

  • On NetWare, when a document fails HTML conversion and its worker process dies, NetWare creates a small file named core*.dmp in the server's root directory. You should periodically delete these files.

9.3 Linux WebAccess Issues

9.3.1 WebAccess on SUSE Linux Enterprise Server 10

SUSE Linux Enterprise Server 10 uses Tomcat 5 rather than Tomcat 4. It also uses the MOD_PROXY module rather than the MOD_JK connector. Installation instructions that compensate for these differences are available in TID 3248145 in the Novell Support Knowledgebase.

9.3.2 Novell Distribution of Apache and Tomcat

GroupWise 7 on Linux includes a Novell distribution of Apache and Tomcat that you can install along with the WebAccess Application if you do not already have Apache and Tomcat running on that server. The Novell distribution relies on OpenSSL libraries. If OpenSSL is not already installed on the server where you plan to install the Novell distribution of Apache and Tomcat, you can obtain it from the OpenSSL Project. Download and build OpenSSL for your version of Linux before installing the Novell distribution of Apache and Tomcat.

The Novell distribution is installed in the following directories:

Apache:

/var/opt/novell/http and 
/etc/opt/novell/http

Tomcat:

/var/opt/novell/tomcat4 and 
/etc/opt/novell/tomcat4

and is started using the following customized commands:

Tomcat:

/etc/init.d/novell-tomcat4 start

Apache:

/etc/init.d/novell-httpd start

The WebAccess Installation program lets you choose whether you want to install the Novell distribution. During installation, select Install WebAccess Application with Apache and Tomcat if you want to install the Novell distribution. Select Install WebAccess Application if you do not want to install the Novell distribution of Apache and Tomcat because you have an existing Apache and Tomcat installation that you want to use with WebAccess.

NOTE:If you are installing on Novell Open Enterprise Server (OES), the option to install with Apache and Tomcat is not available.

If you install the Novell distribution on a server where a standard distribution of Apache and Tomcat is already installed and running, you will encounter a port conflict on port 80. You can resolve the port conflict by choosing to run one distribution or the other, or you can reconfigure one distribution or the other.

To reconfigure the Novell distribution to use a different port number, edit the httpd.conf file in the /etc/opt/novell/httpd/conf directory. Locate the following line:

Listen 80

Change the port number to a something that is not already being used on the server, then save and exit the file.

9.3.3 Prolonged “Please Wait” Message during Installation

On slower Linux machines, if you select Install WebAccess Application with Apache and Tomcat, your machine might appear to hang on the “ Please Wait” message. Apache and Tomcat are being installed while the “ Please Wait” message is displayed, before the WebAccess Application installation begins.

9.3.4 Installation Security

During installation, the Linux WebAccess Installation program requires access to eDirectory by way of LDAP authentication. The LDAP Group object includes an option named Require TLS for Simple Binds with Password, which is enabled by default. With this option enabled, you must provide the LDAP server's trusted root certificate, which must be exported from the LDAP server, in order for LDAP authentication to take place (typically on port 636) during installation of the WebAccess.

Unless you already have SSL set up, an easier alternative is to disable Require TLS for Simple Binds with Passwords in ConsoleOne, which allows LDAP authentication to take place using clear text (typically on port 389), during installation of WebAccess. After disabling the option, restart eDirectory, install WebAccess, then re-enable Require TLS for Simple Binds with Password and restart eDirectory again.

9.3.5 Re-installation Issue

If you install Linux WebAccess in an eDirectory context where the WebAccess objects already exist, a message informs you that you can “use the existing objects.” In actuality, the objects are deleted and re-created, so if you have customized the properties of the existing objects, you must customize the objects again after installing WebAccess on Linux.

9.3.6 --httpport Switch Not Listed in webac70a.waa File

The -httpport switch has been added to the Linux WebAccess Agent to specify the port number for HTTP communication. However, it is currently not listed in the webac70a.waa file on Linux.

9.3.7 Viewer Agent Issues on Linux

  • On Linux, if you run the Viewer Agent as a user that is not running The X Window system, then WebAccess client users cannot view embedded vector-based graphics in attachments. To enable users to view embedded vector-based graphics, make sure that the user that starts WebAccess (and hence, the Viewer Agent) is running The X Window System and has a DISPLAY environment variable set so that the Viewer Agent can write to the local display. One way to accomplish this is to use the sux command to become root before you start the WebAccess Agent.

  • On Linux, the third-party viewer software used by the Viewer Agent has a dependency on libXm.so.1, which might not be included with your Linux package. To resolve this, create a symbolic link in the agents lib directory to the version of the libXm modules that is available on your Linux server. For example:

    ln -s /usr/X11R6/lib/libXm.so.3.0.1 /opt/novell/groupwise/
                                                   agents/lib/libXm.so.1
    

9.3.8 WebPublisher Configuration

The WebAccess Installation program does not configure WebPublisher for you. Some manual configuration is required. For instructions, see the GroupWise 7 Installation Guide ( /docs/us/GroupWiseInstallationGuide.pdf).

9.3.9 WebPublisher Template Settings Not Saved

Changes to the settings on the Templates page of the GroupWiseWebPublisher object in ConsoleOne are not saved to the webpub.cfg file. To work around this, after making changes on the Templates page, select a different property page on the GroupWiseWebPublisher object, then click OK or Apply to save the template settings correctly.

9.3.10 Commented Lines in Configuration Files

If you have commented out any lines in the Linux WebAccess configuration file ( webacc.cfg) or the WebPublisher configuration file ( webpub.cfg), you should back up those files before installing GroupWise 7. If you use the Configure WebAccess Application option in the Installation program, those commented lines become uncommented and the settings return to their defaults. However, any other changes you have made to the configuration files are retained. You must comment out the lines again and edit the settings as needed, using the backup copies for reference.

9.3.11 WebAccess Client Help Displays Incorrectly in Firefox on Linux

In Firefox* on Linux, the horizontal scroll bar in the left panel of the WebAccess client help displays in the middle of the column instead of at the bottom. It does not interfere with help functionality.

10.0 Internet Agent Issues

10.1 General Internet Agent Issues

10.1.1 /copyonly Startup Switch Doesn’t Update the Database Version

If you use the /copyonly startup switch on the Internet Agent Installation program to install the GroupWise 7 SP1 Internet Agent software, the database version on the GWIA object does not get updated. As a result, the SP1 enhancement described in Consolidated Configuration Information in What’s New in GroupWise 7 in the GroupWise 7 Installation Guide does not occur. Therefore, you should not use the /copyonly startup switch when updated existing Internet Agent installation to GroupWise 7 SP1.

10.1.2 Address Resolution Change Since GroupWise 6

In GroupWise 6 and its Support Packs, there was a problem with the address format used for sending to distribution lists and resources if you set Internet Addressing to one of the following formats (which are not appropriate for distribution lists and resources):

  • first_name. last_name@ Internet_domain

  • last_name. first_name@ Internet_domain

Messages to distribution lists and resources were initially undeliverable and were sent to the Internet Agent. The Internet Agent then successfully resolved the addresses and sent the messages back into the GroupWise system. Users did not notice the problem, but some administrators noticed unnecessary traffic through the Internet Agent.

In GroupWise 6.5, the address format problem for sending to distribution lists and resources was corrected. However, users who originally used GroupWise 6 have the erroneous address format for distribution lists and resources in their Frequent Contacts address books. If you are updating from GroupWise 6 to GroupWise 7 and unnecessary traffic through the Internet Agent is a continuing problem, have users delete distribution lists and resources from their Frequent Contacts address books so that the correct address format is used for name completion in the future.

10.2 NetWare/Windows Internet Agent Issues

None.

10.3 Linux Internet Agent Issues

10.3.1 Obsolete grpwise-ia Script

GroupWise 6.5 included the /etc/init.d/grpwise-ia script for starting and stopping the Linux Internet Agent. In GroupWise 7, the Internet Agent is started along with the POA and the MTA, using the grpwise script. Therefore, you should delete the obsolete grpwise-ia script from /etc/init.d so that it is not used inadvertently.

10.3.2 Installation Security

During installation, the Linux Internet Agent Installation program requires access to eDirectory by way of LDAP authentication. The LDAP Group object includes an option named Require TLS for Simple Binds with Password, which is enabled by default. With this option enabled, you must provide the LDAP server's trusted root certificate, which must be exported from the LDAP server, in order for LDAP authentication to take place (typically on port 636) during installation of the Internet Agent.

Unless you already have SSL set up, an easier alternative is to disable Require TLS for Simple Binds with Passwords in ConsoleOne, which allows LDAP authentication to take place using clear text (typically on port 389), during installation of the Internet Agent. After disabling the option, restart eDirectory, install the Internet Agent, then re-enable Require TLS for Simple Binds with Password and restart eDirectory again.

10.3.3 libXm.so.3 Error

If you try to start the Linux Internet Agent using the --show switch on a server where The X Window System and Open Motif are not running, you receive the following error:

libXm.so.3: cannot open shared object file
: no such file or directory

To resolve the error, start The X Window System and Open Motif before starting the Internet Agent with the --show switch. If you start the Internet Agent without the --show switch, you can use the Internet Agent Web console to monitor the Internet Agent from your Web browser.

11.0 Monitor Issues

11.1 General Monitor Issues

11.1.1 Restoring Monitor Settings after Reinstallation

Monitor settings are stored in the monitor.xml file in the Monitor installation directory. Agent groups are also stored in this file. If you reinstall the Monitor software, the monitor.xml file is backed up as monitor.001. To restore previous Monitor settings and agent groups, remove the newly installed monitor.xml file and rename monitor.001 to monitor.xml.

11.1.2 Monitor Agent SSL Configuration

If you want to enable SSL using the Monitor Agent /httpssl and /httpcertfile switches, the certificate file must be in PEM format. This differs from the other GroupWise agents, which take a .b64 public certificate file and a .key private key file. The PEM format combines the certificate and key in a single file.

11.2 Windows Monitor Issues

11.2.1 New NetWare and Windows Monitor URLs

If you've used Monitor on a NetWare or Windows Web server, you are accustomed to accessing the following URLs:

Web Services page:

Default index.html file of Web server

Monitor Web Console:

http://web_server_address/servlet/gwmonitor

Starting in GroupWise 7, use the following URLs on NetWare and Windows Web servers:

GroupWise-specific Web Services page:

http://web_server_address/gw/index.html

Monitor Web Console:

http:// web_server_address/gw/gwmonitor

To keep users' browser bookmarks from being broken, you should redirect the old URLs to the new URLs. Follow the instructions in Section 9.2.6, New NetWare and Windows WebAccess URLs, substituting /gw/gwmonitor for /gw/webacc as needed in the instructions.

11.3 Linux Monitor Issues

11.3.1 Monitor Issues Shared with WebAccess

Monitor and WebAccess share a substantial amount of functionality. The following WebAccess issues also pertain to Monitor:

12.0 International Issues

12.1 General International Issues

12.1.1 Double-Byte Characters in Directory Names and Filenames

Do not use double-byte characters in directory names and filenames.

12.1.2 Double-Byte Characters in Passwords

Do not use double-byte character in users' passwords.

The Change GroupWise Password dialog box in ConsoleOne currently allows entry of double-byte characters. However, the GroupWise client login does not allow entry of double-byte characters in passwords, so a user who was assigned a password with double-byte characters in ConsoleOne cannot type the double-byte characters when attempting to log in to GroupWise.

12.1.3 Character Encoding in WebAccess

Auto-detection of character encoding for the WebAccess/WebPublisher index.html page does not work for some Web browsers. If you do not see the localized languages in the drop-down menu on the Web services page ( index.html), set your Web browser's character encoding to UTF-8. In some browsers, you can click View > Encoding to set the Web browser's encoding.

You might also encounter character encoding problems when reading HTML-formatted messages. In this case, set your Web browser's character encoding for the new message window to UTF-8. You can do this by right-clicking in the new message window and then setting the encoding, or by clicking View > Encoding.

12.1.4 WebAccess Spell Checker Displays Corrupt Characters for Russian

When Russian characters are used, they are displaying in the Spell Checker as corrupt characters.

12.1.5 WebAccess Attachments with Extended Characters in the Filenames

On Windows, Mozilla*-based browsers such as Firefox and Netscape* do not save extended character filenames correctly, even though the filename displays correctly in the Save As dialog box. This is a browser problem, not a GroupWise problem. There is no workaround.

In Safari on Macintosh, extended character filenames are not interpreted correctly. As a workaround, use Firefox instead of Safari if you receive attachments with extended character filenames. Again, this is a browser problem, not a GroupWise problem.

12.2 NetWare/Windows International Issues

12.2.1 Print Calendar Language

The GroupWise client Print Calendar feature always prints calendars in the language specified in Regional Options or Regional Settings in the Control Panel, even if the client is installed in a different language. For example, if French (Switzerland) or French (Swiss) is specified in the Control Panel and the client is installed in German, calendars print in French.

12.2.2 Japanese Viewers for WebAccess

In the WebAccess client running on Japanese Windows XP, some characters might not display correctly.

12.3 Linux International Issues

12.3.1 Display Problem with Agent Console Interfaces

If you run the Linux GroupWise agents with an agent console interface in languages other than English, the display of logging information might not display correctly. The problem occurs if your language encoding is set to UTF-8.

To determine your current language encoding, use the following command in a terminal window:

locale

You can change your language encoding in YaST:

  1. Start YaST, click System, then double-click Choose Language.

  2. Select the language you are running the agents in, then click Details.

  3. Deselect Use UTF-8 Encoding, then click OK.

  4. Stop and then restart the agents to put the new setting into effect.

12.3.2 Russian Keyboard

When you use a Russian keyboard, the Linux environment variables that provide language and locale information are typically set to ru_RU. Typically, this setting implies the Russian character set ISO-8859-5. However, on some distributions of Linux, the ISO-8859-5 character set must be set explicitly in order for your Russian keyboard to work with the GroupWise Cross-Platform client. Use the following command to specify the character set along with the language and locale information:

export LANG=ru_RU.ISO-8859-5

In most cases, setting the LANG environment variable also sets all LC_* environment variables and resolves all Russian keyboard problems. If you set the LANG environment variable and your Russian keyboard still does not work, use the following command to view the current settings for the LANG and LC_* environment variables:

locale

If any of the LC_* environment variables have not inherited the ISO-8859-5 specification, export them individually.

12.3.3 Mnemonics for Arabic, Hebrew, and Double-Byte Languages

Keyboard mnemonics for menu items work for characters a-z and A-Z, but not for other characters.

12.3.4 Localized Agent User Interface Display

The Linux GroupWise agent user interfaces display correctly if the Linux environment is using the ISO-8859-1 character set, which is the default for the GroupWise administration languages and locales.

  • French: fr_FR
  • German: de_DE
  • Portuguese: pt_BR
  • Spanish: es_ES

If the Linux environment is using a different character set encoding such as UTF-8 (for example, fr_FR.UTF-8), the localized agent user interfaces do not display correctly.

13.0 Documentation Issues

13.1 General Documentation Issues

None.

13.2 NetWare/Windows Documentation Issues

13.2.1 GroupWise Windows Client Help

To support accessibility requirements within GroupWise Help, the Help for the GroupWise Windows client uses Microsoft HTML Help. In order for Microsoft HTML Help to display on a Windows workstation, the workstation must have Internet Explorer 4. x or later installed.

13.3 Linux Documentation Issues

13.3.1 Agent Help Does Not Display When Agent Runs as a Non-root User

When you start the Linux POA, the Linux MTA, and the Linux Internet Agent using the --show switch to display a GUI user interface, if the agents are running as a non- root user, clicking Help does not display the agent help file. Help is displayed in a browser window and the agents currently launch the browser as root. Giving the user access to the browser window as root would be a security risk. This is working as designed.

13.3.2 Help Image Display on an iChain Server

If you display help from an agent Web console on a server where Novell iChain® is installed, and if iChain is configured to use the Path-Based Multihoming option, the image at the top of the help topic does not display.

14.0 GroupWise Defect Fixes

14.1 Address Book Fixes

  • You can send messages to recipients whose names include extended characters.

  • You can send messages to internal recipients who are not in your Frequent Contacts address book.

  • When you create a personal group that includes recipients in the To, CC, and BC fields, the recipients retain their respective recipient types when you select the group in the To field of a new message.

  • The absence of the Object ID attribute in the GroupWise Address Book no longer causes Name Completion to stop working in the GroupWise client.

14.2 Administration Fixes

  • When you specify the path for a trusted root certificate for an LDAP server, the path is stored permanently as a UNC path.

  • If you set a global signature at the domain or post office level, you can set it to <None> at the user level.

  • You can select an Internet domain name for a nickname.

  • In a system with two Internet domain names and two identical mailbox IDs in different post offices, you can override the default address formats for each user without getting a DB57 error.

  • After you move a user, the user’s Unread Items panel in the GroupWise Windows client correctly displays only unread items.

  • You can successfully move a user whose visibility is set to None.

  • You can successfully move a very old user that has a two-character FID.

  • When you move a user from a GroupWise 6.5 post office to a GroupWise 7 post office, the final Move Completed message now displays.

  • If you rebuild a database when running ConsoleOne as root, it does not interfere with running the agents as a non- root user thereafter.

  • You can merge a GroupWise 6.5 domain into a GroupWise 7 system.

  • In the Link Configuration Tool, pressing Cancel discards changes as it should.

  • The functionality of the selection list in the GroupWise Target Service Agent for File Systems (TSAFSGW) has been improved.

  • In Linux ConsoleOne, the restore area path is stored as a UNC path, not a Linux path.

  • In Linux ConsoleOne on SUSE Linux Enterprise Server 9, it is no longer possible to create duplicate GWIDs when adding users.

  • On Linux, the GroupWise Database Copy utility (DBCopy) runs successfully if the filename of the GroupWise guardian database ( ngwguard.db) is in all uppercase ( NGWGUARD.DB).

  • Improvements were made to the GroupWise Database Copy utility (DBCopy) on Linux to facilitate migration.

14.3 Agent Fixes

  • The POA can successfully access a restore area on a remove server regardless of the platform of the remote server.

  • The POA captures user information about who logged in through a trusted application.

  • If the Linux POA is running as a non- root user and a user creates a new document in a library, the POA indexes the document and the user can successfully use Find to search the document.

  • When running as a daemon, the Linux POA can access an LDAP server using an SSL connection.

  • Fixed some POA abends.

  • If the MTA is enabled for SSL on its MTP port but not its HTTP port, the MTP port works correctly with SSL.

  • Fixed several MTA abends.

  • The Linux grpwise script allows for running more than one of each type of GroupWise agent.

14.4 Client Fixes (Windows)

  • The column widths in your Home View are always retained after displaying other folders.

  • If you receive a message formatted in a large font, your reply uses your default font, not a very small font.

  • When you reply to a message, you signature is applied immediately below your reply text, not at the bottom of the entire message.

  • If you have configured the client to prompt you before adding your signature, the signature is always added when you click Add.

  • You can always view item properties in your archive.

  • When you drag an attachment from a message to a folder, the file retains its original filename and file type.

  • You can multiple-select items to print.

  • Appointments sent to CC recipients default correctly to Free, rather than to Busy.

  • When you reschedule an appointment that has an attachment and perform a Busy Search to identify the new time, the attachments stays with the rescheduled appointment.

  • When you display a calendar that includes an All-Day Event, the event is confined to the day on which it is scheduled.

  • When you print a calendar that includes an All-Day Event, the event is confined to the day on which it is scheduled.

  • The client no longer displays an 8101 error when accessing a Calendar that includes an All-Day Event.

  • You can set categories on items in a shared folder if you have sufficient rights to do so.

  • You can view items in a shared folder immediately after viewing your Calendar.

  • You can show a posted tasks in the Checklist folder.

  • With the QuickViewer on, you can scroll back and forth horizontally in a message that has a category assigned.

  • You can go from a very long Sent Items list to your Contacts folder without waiting for the entire Sent Items list to display.

  • The Spell Checker works correctly in very large HTML-formatted messages.

  • In Caching mode, you always have the correct rights when you proxy into another user’s mailbox.

  • In Caching mode, with Messenger Presence turned on, in the QuickViewer, you can move rapidly between messages.

  • In Caching mode, you no longer receive a second notification if you open an item and then synchronize with your Online mailbox.

  • The GroupWise Address Book downloaded to your Caching mailbox does not become damaged.

  • If you perform another action without waiting for a Find to finish, the Find finishes in the background of your other activity.

  • The keystroke sequence for using Advanced Find opens a new field without needing a mouse click.

  • Messages with a content type of Multipart/Related and Multipart/Alternative are accepted and displayed by the GroupWise client.

  • If you type HTML tags and text into a message in Plain Text mode, and if the recipient is in HTML mode, the message displays as an HTML-formatted message.

  • If you save an HTML-formatted message as a draft and if the message includes a path to an image where the path or the image filename includes a space, the path and filename are correctly displayed when you resume work on the draft message.

  • You can open a message from the Notify pop-up and then immediately close the GroupWise client.

  • You can reply to a message where the first character in the message is a dash (-).

  • If you have just one S/MIME certificate, it is automatically selected as the default.

  • When using a MIME encoding other than the default, you can add an image to an HTML-formatted message or signature without having it appear as an attachment much larger than the original image.

  • Third-party applications can attach mime.822 files to messages.

  • HTML-formatted messages display properly in other e-mail clients such as AOL and HotMail.

  • When Firefox is set as your default browser, hyperlinked URLs open successfully.

  • On Windows XP, you can send a message from a Wordpad document using the GroupWise client.

  • Third-party applications can log into GroupWise using the extended MAPI application that ships with GroupWise.

  • The default client integrations file ( gwappint.inf) has the correct integration type for Excel.

  • Excel 2003 can be successfully integrated with GroupWise.

  • Installing GroupWise after installing Outlook no longer stops Outlook from functioning.

  • If you create a message in the GroupWise client, then click Actions > Send Using and select a POP account, the message is sent as if it originated in the selected POP account.

  • You can download messages from a POP e-mail client when attachment filenames include international characters.

  • When you update from GroupWise 6.5, you only need Read rights in the software distribution directory in order to run Setup.

  • In the Portuguese client, the subject and place information in a posted appointment displays correctly in the Calendar.

  • In languages such as Hebrew and Russian, clicking Reply or Forward in a message does not change the keyboard from the expected language.

14.5 Client Fixes (Cross-Platform)

  • In HTML view, images display correctly.

  • HTML-formatted messages now have margins comparable to those used in the Windows client.

  • If a message contains a link to an image, the message displays successfully, without causing the GroupWise client to freeze.

  • Large messages that include numerous images print successfully.

  • A hyperlinked URL that includes an e-mail address at the end is correctly interpreted as a URL and does not open a Mail To window.

  • A hyperlinked URL created in the GroupWise Windows client displays correctly when displayed in the HTML view in the Cross-Platform client.

  • If you highlight and move a block of items to a different folder, the highlight in the original folder is positioned as expected.

  • Attachments are saved with the exact filename and extension specified in the Save File As field.

  • You can always drag an attachment from one message to another.

  • If you drag the same attachment to a message more than once (for example, you modified the file and want to attached the updated version), only one attachment displays in the message. The actual attachment process happens when the message is sent, so the current version always gets attached.

  • You can successfully sent messages to recipients that you selected from an address book and who have Internet addresses associated with them.

  • Under Print Calendar, if you select the Daily form and you select Appointments as a Table, Task and Reminder Notes as a List, it prints the days selected on the Content tab.

  • The Checklist display option works correctly on any folder.

  • The password to the Caching mailbox never gets inadvertently cleared.

  • If you open a new GroupWise window and then proxy into another user’s mailbox, only the new windows changes to the proxy user’s mailbox.

  • The Search feature is more robust and does not crash under certain specialized circumstances.

  • Misspelled words are always properly highlighted.

  • The spell checker no longer hangs the Cross-Platform client on Novell Linux Desktop 9 SP3.

14.6 Client API Fixes

  • The client API returns the correct number when there are more than 65,535 records to count in the GroupWise Address Book.

  • The client API returns the correct number when there are more than 100 users in a distribution list.

  • The client API can successfully iterate through all the message-type attachments of a message in an archive, regardless of how nested the message attachments are.

  • The client API returns an appropriate error when it fails to proxy into another user’s account.

  • If the client API encounters a user-defined field in an entry in a user’s Contacts Address Book that is not of type text, it skips the non-text field.

  • When accessing a Message object, the client API accesses message attachments correctly.

  • The message body refreshes correctly.

  • Semaphores no longer deadlock.

  • Multiple threads no longer cause data corruption and deadlocks.

14.7 Engine Fixes

  • IMAP can handle folder names that include parentheses.

  • The IMAP FETCH command can handle some incorrectly formatted MIME messages without complaint.

  • The IMAP APPEND command can handle non-system keyword flags that are not the three predefined GroupWise flags.

  • The IMAP Search Header < field> < string> command works for most header fields.

  • GroupWise IMAP is compatible with the Pine e-mail program.

  • SOAP works properly on a multiprocessor server.

  • SOAP can handle logging in to a shared folder.

  • SOAP never releases the static global parent object, which increases stability.

  • CAP no longer trims out the <CR><LF> at the end of a frame buffer.

  • CAP can handle a null category.

  • When converting UTF-8 to WPText, CAP no longer converts <LF> to <SP>.

  • CAP no longer returns a D107 error when reading the items returned from a read index.

14.8 GWCheck Fixes

  • GWCheck runs successfully on very large post offices.

  • On Macintosh, the GWCheck desktop icon starts GWCheck.

14.9 Internet Agent Fixes

  • The Internet Agent server console no longer becomes garbled with extraneous text.

  • If the Internet Agent receives a 4 xx message on a DATA command from an SMTP host, it defers the message, rather than responding as if the message had been successfully received.

  • Authentication from IMAP e-mail clients through the Internet Agent occurs more quickly.

  • Messages with ISO-8859-15 encoding are processed correctly.

  • The Internet Agent can correctly process Internet domain names that contain dashes (-).

  • Messages that contain international characters in the x-spam-report field are processed successfully.

  • The Internet Agent now accepts messages where several MIME format issues were previously causing them to be placed in the gwprob directory.

  • The Internet Agent no longer returns messages to itself when it cannot resolve the hostname. It returns an Unknown Host error instead.

  • The Internet Agent no longer allocates unneeded .5 GB blocks of memory.

  • Fixed some Internet Agent abends.

14.10 Monitor Fixes

  • None.

14.11 WebAccess Fixes

  • The first mouse click after you log in, after you change folders, and after a refresh successfully opens the message you clicked.

  • Users always get the proper templates when they click New.

  • In a new messages, the cursor focus is automatically in the To field.

  • Messages with embedded images display correctly.

  • When viewing item properties, the Display Next button displays correctly.

  • You can view documents in a shared folder.

  • Attachment filenames are correctly retained when viewing attachments.

  • Reply to All places all usernames in the correct fields with valid e-mail addresses.

  • The folder list retains folders as expanded or collapsed after various intervening actions.

  • You can successfully drag and drop a large number of messages individually.

  • In the Calendar, when you click New, the default is New Appointment.

  • When you create a posted appointment in the Week view, it displays correctly as a posted appointment.

  • In the Day view in the Calendar, All Day Events display just on the day for which they are scheduled.

  • WebAccess installs much more quickly.

  • The WebAccess Agent no longer causes Java to go to 100% utilization.

  • The WebAccess Application reliably starts the Document Viewer Agent.

  • Fixed a WebAccess Agent abend.

  • Using Firefox, if you time out and then resume your session, you can successfully add attachments to a message that was in progress when you timed out.

  • On NetWare 6, the index.html file displays as it should.

  • WebAccess retains the proper character set when displaying messages.

  • If character set information is not available, WebAccess defaults to ISO-8859-15.

  • Name Completion looks for the Frequent Contacts Address Book in the correct language.

  • Users can add names to the Frequent Contacts Address Book in all languages.

15.0 GroupWise Connector for Outlook

For installation instructions, known issues, and defect fixes relating to the GroupWise Connector for Microsoft Outlook, see the Support Pack 1 Readme for the GroupWise Connector for Microsoft on the GroupWise 7 Documentation Web site.

16.0 GroupWise Mobile Server

For installation instructions, known issues, and defect fixes relating to GroupWise Mobile Server, Powered by Intellisync*, see the Support Pack 1 Readme for GroupWise Mobile Server on the GroupWise 7 Documentation Web site.

17.0 Documentation

The following sources provide information about GroupWise 7 and have been updated for Support Pack 1:

  • Product documentation included with the software in the \docs\us directory:

    • Quick Start ( GroupWiseQuickStart.pdf)

    • Installation Guide ( GroupWiseInstallationGuide.pdf)

  • Online product documentation: GroupWise 7 Documentation Web site

18.0 Documentation Conventions

In this documentation, a greater-than symbol (>) is used to separate actions within a step and items in a cross-reference path.

A trademark symbol (®, ™, etc.) denotes a Novell trademark; an asterisk (*) denotes a third-party trademark

19.0 Legal Notices

Novell, Inc. makes no representations or warranties with respect to the contents or use of this documentation, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to revise this publication and to make changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes.

Further, Novell, Inc. makes no representations or warranties with respect to any software, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to make changes to any and all parts of Novell software, at any time, without any obligation to notify any person or entity of such changes.

Any products or technical information provided under this Agreement may be subject to U.S. export controls and the trade laws of other countries. You agree to comply with all export control regulations and to obtain any required licenses or classification to export, re-export, or import deliverables. You agree not to export or re-export to entities on the current U.S. export exclusion lists or to any embargoed or terrorist countries as specified in the U.S. export laws. You agree to not use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses. Please refer to www.novell.com/info/exports/ for more information on exporting Novell software. Novell assumes no responsibility for your failure to obtain any necessary export approvals.

Copyright © 2006 Novell, Inc. All rights reserved. No part of this publication may be reproduced, photocopied, stored on a retrieval system, or transmitted without the express written consent of the publisher.

Novell, Inc. has intellectual property rights relating to technology embodied in the product that is described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S. patents listed at http://www.novell.com/company/legal/patents/ and one or more additional patents or pending patent applications in the U.S. and in other countries.

For Novell trademarks, see the Novell Trademark and Service Mark list.

All third-party trademarks are the property of their respective owners.