You create the SOAP driver by importing the driver’s basic configuration file and then modifying the configuration to suit your environment. After you’ve created and configured the driver, you need to deploy it to the Identity Vault and start it.
In Designer, open your project.
In the Modeler, right-click the driver set where you want to create the driver, then select
> to display the Driver Configuration Wizard.In the Driver Configuration list, select
or , then click .On the Import Information Requested page, fill in the following fields:
Driver Name: Specify a name that is unique within the driver set.
URL of the Remote SPML Provisioning Service Point: This field applies only if you selected the SOAP-SPML configuration.
Specify the URL for the Provisioning Service Point (PSP) that will listen for, process, and return the results of the SPML requests generated by the SOAP driver.
URL of the Remote DSML Server: This field applies only if you selected the SOAP-DSML configuration.
Specify the URL for the DSML Server that will listen for, process, and return the results of the DSML requests generated by the SOAP driver.
User Container: This field applies only if you selected the SOAP-SPML configuration.
Select the Identity Vault container where users are stored. This value becomes the default for all drivers in the driver set. If you don’t want to change this value for all drivers, leave the current value in this field and change the value on the driver’s Global Configuration Values page after you’ve finished importing the driver.
Driver is Local/Remote: Select
if this driver will run on the Metadirectory server without using the Remote Loader service. Select if you want the driver to use the Remote Loader service, either locally on the Metadirectory server or remotely on another server.Subsciber Keystore Password: This field applies only if you selected the SOAP-DSML configuration. It is used to configure a secure HTTPS connection for the Subscriber channel. Unless you already have a keystore and certificates set up on the driver server and the DSML server, leave this field empty. Complete instructions for creating a secure connection are provided in Section 6.0, Securing Communication.
Publisher Keystore Password: This field applies only if you selected the SOAP-DSML configuration. It is used to configure a secure HTTPS connection for the Publisher channel. Unless you already have a keystore and certificates set up on the driver server and the DSML server, leave this field empty. Complete instructions for creating a secure connection are provided in Section 6.0, Securing Communication.
Publisher Server Key Password: This field applies only if you selected the SOAP-DSML configuration. It is used to configure a secure HTTPS connection for the Publisher channel. Unless you already have a keystore and certificates set up on the driver server and the DSML server, leave this field empty. Complete instructions for creating a secure connection are provided in Section 6.0, Securing Communication.
(Conditional) If you chose to run the driver remotely, click Step 6.
, then fill in the fields listed below. Otherwise, skip toRemote Host Name and Port: Specify the hostname or IP address of the server where the driver’s Remote Loader service is running.
Driver Password: Specify the driver object password that is defined in the Remote Loader service. The Remote Loader requires this password to authenticate to the Metadirectory server.
Remote Password: Specify the Remote Loader’s password (as defined on the Remote Loader service). The Metadirectory engine (or Remote Loader shim) requires this password to authenticate to the Remote Loader
Click
to import the driver configuration.At this point, the driver is created from the basic configuration file. To ensure that the driver works the way you want it to for your environment, you must review and modify the driver’s default configuration settings.
To review or modify the default configuration settings, click Configuring the Driver.
, then continue with the next section,or
To skip the configuration settings at this time, click Configuring the Driver.
. When you are ready to configure the settings, continue withAfter importing the driver configuration file, you need to configure the driver before it can run. You should complete the following tasks to configure the driver:
Configure the driver parameters: There are many settings that can help you customize and optimize the driver. The settings are divided into categories such as Driver Configuration, Engine Control Values, and Global Configuration Values (GCVs). Although it is important for you to understand all of the settings, your first priority should be to review the Driver Parameters located on the Driver Configuration page. The Driver Parameters let you configure the LDAP directory type, publication method, and other parameters associated with the Publisher channel.
Customize the driver policies and filter: The driver policies and filter control data flow between the Identity Vault and the application. You should ensure that the policies and filters reflect your business needs. For instructions, see Section 5.0, Customizing the Driver.
Set Up a Secure HTTPS Connection: The connection between the driver and the SPML or DSML server can be configured to use a secure HTTPS connection rather than an HTTP connection. For instructions, see Section 6.0, Securing Communication
After completing the configuration tasks, continue with Deploying the Driver.
After a driver is created in Designer, it must be deployed into the Identity Vault.
In Designer, open your project.
In the Modeler, right-click the driver icon or the driver line, then select
.If you are authenticated to the Identity Vault, skip to Step 5; otherwise, specify the following information:
Host: Specify the IP address or DNS name of the server hosting the Identity Vault.
Username: Specify the DN of the user object used to authenticate to the Identity Vault.
Password: Specify the user’s password.
Click
.Read the deployment summary, then click
.Read the message, then click
.Click
to assign rights to the driver.The driver requires rights to objects within the Identity Vault. The Admin user object is most often used to supply these rights. However, you might want to create a DriversUser (for example) and assign security equivalence to that user. Whatever rights that the driver needs to have on the server, the DriversUser object must have the same security rights.
Click
, then browse to and select the object with the correct rights.Click
twice.Click
to exclude users that should not be synchronized.You should exclude any administrative User objects (for example, Admin and DriversUser) from synchronization.
Click
.Continue with the next section, Starting the Driver.
When a driver is created, it is stopped by default. To make the driver work, you must start the driver and cause events to occur. Identity Manager is an event-driven system, so after the driver is started, it won’t do anything until an event occurs.
To start the driver:
In Designer, open your project.
In the Modeler, right-click the driver icon or the driver line, then select
.