To set up RConsoleJ, complete the following sections:
At the server console prompt, enter:
rconag6
Enter the password you want network administrators to use when accessing the target NetWare server using RConsoleJ.
Enter the TCP port number.
The default value is 2034.
If the server communicates using IPX only, enter -1 to disable TCP listening.
To enable listening over a dynamically assigned port, enter 0.
Enter the SPX™ port number on which RCONAG6 will listen for a proxy server.
The default is 16800.
If the server communicates using IP only, enter -1 to disable SPX listening.
To enable listening over a dynamically assigned port, enter 0.
NOTE:/DEV/TCP and /DEV/TCPSSL fail if you are using a pure IPX server.
To enable RConsoleJ across the firewall, you need to keep the following ports open: 2034, 2035, and 2036.
You can run the RConsoleJ client from a workstation or a NetWare server.
You can run the RConsoleJ Client on a workstation using any of the following methods:
From a Windows* 2000/XP workstation, browse to ConsoleOne_installation_directory\1.2, and run rconj.exe.
In ConsoleOne, right-click the NetWare server object that you want to remotely control, then click
.In ConsoleOne, select the NetWare server object and then from the Tools menu, click
> > .In ConsoleOne, right-click a Subscriber or Distributor object, then click
.If you have installed ZENworks 7 Management and Monitoring Services, select the NetWare server in the
, then click .You can run the RConsoleJ Client on a NetWare server using any of the following methods:
In ConsoleOne, right-click the NetWare server object that you want to remote control and click
, or click the NetWare server object and then from the Tools option click > > .From the server console prompt, enter rconj.ncf.
From the server GUI, click
> > .The NetWare server loaded with the RConsoleJ Proxy Agent should have an IP/IPX stack loaded.
At the server console prompt, enter the following command:
rconprxy
Enter the TCP port number on which RCONPRXY listens for RConsoleJ.
The default is 2035.
To enable listening over a dynamically assigned port, enter 0.
When the NetWare server is running the RConsoleJ Proxy Agent, the RConsoleJ Client can communicate through it with the target NetWare server that uses only IPX to communicate.