Use the commands in this section to manage compression parameters for NSS volumes where the Compression attribute has been enabled. After compression is enabled for a volume, it cannot be disabled.
Server-level compression parameters apply to all NSS volumes on the server. For details about each parameter, see Section 21.2.1, Understanding Server-Level Compression Parameters.
Default: 0
Range: 0 to 23
Hours are specified by a 24-hour clock: (0=midnight; 23=11 p.m.).
Default: 6
Range: 0 to 23
Hours are specified by a 24-hour clock: (0=midnight; 23=11 p.m.).
Default: 14
Range: 0 to 100000 (in days)
Enable file compression on volumes where the Compression attribute is enabled. Immediate Compress requests are queued until compression is allowed.
Default: On
Range: On or Off
Examples
To enable compression, enter
nss /EnableFileCompression
To disable compression, enter
nss /NOEnableFileCompression
The minimum percentage a file must compress in order to remain compressed.
Default: 20
Range: 0 to 50
The number of simultaneous compressions allowed by the system (simultaneous compressions can only occur if there are multiple volumes).
Default: 2
Range: 1 to 8
Specify what the file system does with an uncompressed version of a file after the server has decompressed it.
IMPORTANT:Before a compressed file can be opened, there must be sufficient space available on the volume for the uncompressed and compressed copies of the file to coexist while the file is open.
Default: 1
Range: 0, 1, or 2
0 = Always leave the file compressed.
While the file is open, both the uncompressed and compressed copies of the file coexist on the volume. If the file is closed without changes, the uncompressed copy of the file is discarded. If changes are saved, the compressed copy of the file is discarded. After the modified file is closed, it is queued for immediate compression. Sufficient space must be available for both the compressed and uncompressed copies of the file to temporarily coexist on the volume in order for the compression to occur. After successful compression, the uncompressed copy of the modified file is discarded.
1 = Leave the file compressed until second access if it is read only once during the time specified by the Days Untouched Before Compression parameter. This is the default behavior for compression.
While the file is open, both the uncompressed and compressed copies of the file coexist on the volume. The first time that the file is closed without changes in the specified period, the uncompressed copy of the file is discarded. The second time that the file is closed without changes in the specified period, the compressed copy of the file is discarded. If changes are saved, the compressed copy of the file is discarded. The uncompressed file remains uncompressed until it meets requirements for being compressed.
2 = Always leave the file uncompressed.
While the compressed file is open, both the uncompressed and compressed copies of the file coexist on the volume. When the file is closed or when changes are saved, the compressed copy of the file is discarded. The uncompressed file remains uncompressed until it meets requirements for being compressed.
The percentage of disk space on a volume that is required to be free in order for file decompression to permanently change the compressed file version to uncompressed, which prevents newly uncompressed fils from entirely filling up the volume. Compressed files that are written to are always left uncompressed.
Default: 10
Range: 0 to 75
The time interval (in minutes) between displaying warning alerts when the file system is not permanently changing compressed files to uncompressed files due to insufficient free disk space.
Setting the interval to 0 turns off the alert.
Default: 31 minutes
Range: 0 to 720 (0 seconds to 29 days 15 hours 50 minutes 3.8 seconds)
Setting the interval to 0 turns off the alert.
Specifies whether and when to compress deleted files. This command presumes that you have enabled the Salvage attribute for NSS volumes. If Salvage is disabled, deleted files are purged immediately, so there are no deleted files to compress.
Default: 1
Range: 0, 1, or 2
0 = Do not compress deleted files.
1 = Compress deleted files the next day.
2 = Compress deleted files immediately.
NSS offers volume-level commands in this section for configuring and monitoring compression on a specified NSS volume.
Displays the NSS volume compression statistics on the compression screen.
Enables the Compression attribute for the specified volume or for all volumes on the server. After you enable the Compression attribute, the setting persists for the life of the volume. You cannot disable compression, but you can set parameters to effectively turn it off. For information, see Section 21.0, Managing Compression on NSS Volumes.
Stops all queued compression for files, based on the compression triggered by a file open or close.
Allows compression to occur in the background at any time, instead of only within specified hours.
Stops background compression and clears any queued background compression requests. Allow compression to occur only within the specified hours.