zman (1)

Name

zman - The command line interface to manage Novell ZENworks 11 products, including Asset Management, Configuration Management, Endpoint Security Management, and Full Disk Encryption.

Description

The zman command line interface provides quick access to most ZENworks management operations. By utilizing zman commands in scripts, you can automate many ZENworks management tasks.

The following sections provide information about all of the commands provided for the ZENworks products. The commands apply to all products, with the following exceptions:

  • ZENworks Asset Management commands: Apply only to ZENworks Asset Management.

  • ZENworks Bundle commands: Apply only to ZENworks Configuration Management.

  • ZENworks Imaging commands: Apply only to ZENworks Configuration Management.

  • ZENworks Endpoint Security Management commands: Apply only to ZENworks Endpoint Security Management.

  • ZENworks Full Disk Encryption commands: Apply only to ZENworks Full Disk Encryption.

Syntax

zman <category>-<command> [-options] [arguments]

In general, zman commands have both a short form and a long form. The long form is assembled in the form category-action. For example, the command registration-list lists all registrations in a registration folder. There are many commands, but most of them are easy to remember because they are grouped under categories (workstation, server, bundle, policy, administrator, registration, etc) and most actions (list, create, modify, delete) to perform on them are common.

The abbreviated form of each command uses one letter from each word in the long form. In this manner, admin-list is shortened to al. There are some exceptions to this rule to maintain the uniqueness of the short names. For example, bc is the short form of bundle-create, and bcp is the short form of bundle-copy.

A command takes options and arguments. Options can be specified anywhere in the command. Arguments are dependent on position.

Options

Options are of two types: switches and flagged options. Both have a short and long form. The short form is preceded by a single hyphen and the long form is preceded by two hypens. For example, -n and --namefilter are the short and long forms of a flagged option used to filter the display of results by name for the bundle-list command.

Switch: A parameter that does not take any value. Its presence alone conveys the meaning. For example, specifying the –recursive switch in bundle-list indicates that the contents of the subfolders should also be displayed.

Flagged Option: This parameter is used to set a value for an option. The value is given followed by a space or equals sign after the short or long flag of the option.Example: zman bundle-list -namefilter "bundle*" -r

Arguments

Arguments for a command are usually ordered in the same way as the command itself. For example, for server-add-bundle, the server is named first and the bundle second.

Guide to Usage

This section contains a guide to general command formatting and conventions.

Administrators

Every action in zman is governed by the access limitations of the administrator. The initial Administrator account created during the initial installation has rights to all objects. Additional administrator accounts you create are granted read-only rights by default. These accounts must be explicitly granted rights to any objects they are to manage.

Help

The zman command line interface provides help at several levels. Pipeline the help through the operating system's native more command for scrollable output.

  • At the highest level, lists all the categories of commands available in zman and the global options for the commands.

    Example: zman

  • At the all category level, lists all the commands available in zman organized by categories (workstation, server, bundle, policy, etc.).

    Example: zman -h

  • For each category, lists the commands available specific to that category.

    Example: zman policy /?

  • At each command level, gives usage, detailed help, and examples for a particular command.

    Example: zman policy-list - help

  • -h, and --help are the various help options available.

Folders

If no folder is specified for commands that take a folder argument, the command targets the root folder. To specify a folder path, list each folder from the root separated by a forward slash (/). For example, if you have a folder named folder1 in the root, containing a subfolder named subfolder1, you would reference this folder as folder1/subfolder1. Each specified folder must already exist.

Mandatory and Optional arguments

Arguments enclosed inside parentheses ( ) are mandatory and those enclosed by square brackets [ ] are optional.

Ellipsis (...)

An ellipsis indicates that a command accepts multiple entries of the last argument type. The arguments must be separated by space or commas, depending on the command. For example:

zman server-add-bundle [options] (server) (bundle) [...]

The ellipsis indicates that server-add-bundle can accept multiple bundles. In the command level help, the multiple entry argument help is given as [(bundle) (bundle)... (bundle)] for more clarity.

All commands that have multiple entries of the last argument also have the -f|--folder option. This option is convenient if all the entries of the argument are under the same folder. The path of the entries are calculated relative to this folder path. For example:

zman server-add-bundle server1 bundlefolder/bundle1 bundlefolder/bundle2

can also be given as:

zman server-add-bundle server bundle1 bundle2 --folder bundlefolder

Path of the ZENworks Objects

If the argument required is the path of a ZENworks object, the path must be specified relative to the root folder of that object separated by a forward slash (/), unless it is specified in the command help to enter the absolute path. For example:

zman server-add-bundle serverfolder/server bundlefolder/bundle1

where the absolute paths of the arguments are:

/devices/servers/serverfolder/server and /bundles/bundlefolder/bundle1

Exporting Objects to a File

You can use the zman commands such as bundle-export-to-file, policy-export-to-file, and settings-export-to-file to export bundles, policies, and settings definitions respectively to a specified file in the XML format. The file is created with the specified name and file extension. If the file extension is not specified, the .xml extension is added by default. You can use these files to create bundles, policies, and settings.

zman Service

You can now run zman as service. Running zman as a service enables you to execute zman commands in service mode, which reduces the execution time for the commands.

The zman service commands are grouped within the shell category and are as follows:

zman shell-start-as-service (ssas) [options]

Starts the zman service.

Accepts the following options:

  • -s or --servicePort: Specify the port for the zman server to run. The default port is 2020
zman shell-stop-service (sss)

Stops the zman service.

zman shell-status (ssts)

Displays the zman service status.

To run zman commands as a service, you must do the following:

  • Before starting the zman service, run the zman admin-store-credential(asc) command to save the credentials. The zman service uses the saved credentials to run the zman commands in service mode.

  • If you choose to run any zman command that requires file paths in service mode, you must specify the complete file path instead of the relative file path. By default, the working directory is initialized to the location where the zman service is started.

The following zman commands run as separate processes even when the zman service is up and running:

  • zman shell-stop-service(sss)
  • zman admin-create(ac)
  • zman admin-store-credential(asc)
  • zman certificate-authority-export(cae)
  • zman certificate-authority-import(cai)
  • zman zenserver-backup(zsb)
  • zman zenserver-restore(zsr)

Asset Management Commands

These commands are used to load purchase record files and refresh the compliance engine. They apply only to ZENworks Asset Management.

(asset-management-import-contract|amic) <-f|--fileName=Filepath>

Imports a contract to a file. The command queues the import task to be processed by the loader. The loader then loads the contracts from the file.

The command is asynchronous, which means that zman returns immediately and does not wait for the import to be complete. This is because the command might run for a long time. You can check the progress of the import by viewing the log file created by the command.

Accepts the following option:

  • -f, --filename=[File path]: Specify the full path of the comma-separated (.csv or .txt) file to be imported.
asset-management-load-purchase-record (amlpr)

Loads a purchase record file. The Purchase Record Loader looks for the purchase record file to load on the primary server in the folder ZENWORKS_HOME/temp/PurchaseRecordImport/uploaded. If you have not yet used the Purchase Record Loader from ZENworks Control Center, you need to create this folder.

This command is asynchronous, which means zman returns immediately and does not wait for the command to complete. This is because the command may run for a long time. You can check the status of this process from ZENworks Control Center.

asset-management-refresh-compliance-data (amrcd)

Runs the software compliance engine to refresh the software license compliance data.

This command is asynchronous, which means zman returns immediately and does not wait for the command to complete. This is because the command may run for a long time. You can check the status of this process from ZENworks Control Center.

Audit Settings Commands

These commands are used to import and export audit configuration details. Audit commands begin with audit- in the long form, or with the letter a in the short form. The following commands accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

(audit-settings-export-to-file|asetf) [-s|--source=source device or device folder path] [-a|--auditEventStatus=Event status] [-t|--type=Type] [-e|--effective] (XML file path) [<settings name> <settings name>... <settings name>]

Exports change and agent audit event settings to an XML file for a zone, device folder or device level.

-s, --source=<source device or device folder path>: Path of the device or device folder relative to /Devices from which settings have to be exported. If not specified, settings will be exported from the Management Zone level.

-a, --auditEventStatus=<Event status>: Event status enabled, disabled or all. Default is all.-t, --type=<Type>: The event type can be AgentEvents, ChangeEvents or all. The default value is all.-e, --effective: If specified, the effective settings will be retrieved, else only the settings defined or overridden at the source path will be retrieved.

(XML file path): The file into which the settings data will be stored in XML format. If the file does not exist a new file is created.

[settings name][...]: Names of the settings to be exported. If not specified, all settings will be exported. If specified, the effective settings will be retrieved, else, only the settings defined or overridden at the source path will be retrieved.

audit-settings-import-from-file (asiff)[options] (XML file path) [destination device or device folder path][...]

Imports change and agent audit event settings from an XML file, for a zone, device folder or device level.

(XML file path): XML file containing exported settings information. Use audit-settings-export-to-file (asetf) to export settings information into an XML file.[destination device or device folder path][...]: Path of the device or device folder relative to /Devices on which settings have to be set. If not specified, settings will be set at the Management Zone level.

Administrator Commands

These commands are used to create and manage administrator accounts. Administrator commands begin with admin- in the long form or the letter a in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

admin-clear-credential (acc)

Clears the ZENworks username and password stored by using the admin-store-credential command. It is always safer and is a good practice to delete the stored credentials after you are finished executing the commands.

admin-create (ac) <administrator or user> [options]

Creates a ZENworks administrator account.

<administrator or user> - Name of the administrator or full path of a user in a user source.

Accepts the following options:

  • -f, --fullname=[full name] - Full name of the ZENworks administrator.
  • -a, --assign-same-rights - Gives the new administrator the same rights as the administrator who executes this command.

The command prompts for the password of the administrator, to avoid entering the password in clear text. If the administrator account is based on a user, it uses the same credentials defined in the user source so the command does not prompt for the password.

admin-delete (ad) <ZENworks administrator name> [...]

Deletes a ZENworks administrator account.

<ZENworks administrator name> [...] - Name of the ZENworks administrator. The wildcard * can be used in the object names if it is enclosed in quotation marks. Exercise caution while using wildcards for deleting objects.

admin-list (al) [options]

Lists all ZENworks administrator accounts.

Accepts the following options:

  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotation marks.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
admin-list-roles (alr) <ZENworks administrator name> [options]

Lists roles assigned to a ZENworks administrator account.

Accepts the following option:

  • -l, --longnames - Displays names for the rights. By default, the abbreviated form of the rights name is displayed.
admin-rename (ar) <ZENworks administrator name> (new name)

Renames a ZENworks administrator account.

admin-rights-delete (ard) <ZENworks administrator name> [options] [object path]

Deletes rights assigned to a ZENworks administrator account.

[object path] [...] - Full path of the ZENworks object, starting with a forward slash (/).

Accepts the following option:

  • -c, --category=[rights category] - Name of the category within which the rights are grouped. To see the list of categories, run zman admin-rights-set --Help | more.
admin-rights-info (ari) <ZENworks administrator name> [object path] [options]

Displays rights assigned to a ZENworks administrator account.

[object path] [...] - Full path of the ZENworks object, starting with a forward slash (/).

Accepts the following options:

  • -c, --category=[rights category] - Name of the category within which the rights are grouped. To see the list of categories, run zman admin-rights-set --Help | more.
  • -e, --effective - Displays the effective rights of the administrator. Effective rights include rights inherited from roles assigned to the administrator. If this option is not specified, rights assigned directly to the administrator are displayed.
  • -l, --longnames - Displays names for the rights. By default, the abbreviated form of the rights name is displayed.
admin-rights-set (ars) <ZENworks administrator name> [rights category] [object path] [...] [options]

Allows or denies rights for a ZENworks administrator account.

[rights category] - Name of the category under which the rights are grouped. To see the list of categories, run zman admin-rights-set --Help | more.

[object path] [...] - Full path of the ZENworks object, starting with forward slash (/), on which the rights should be enforced. To view the root folders of the allowed object types for which rights can be assigned within each rights category, run zman admin-rights-modify --Help | more.

Accepts the following options:

  • -a, --allow=[right][...] - A comma-separated list of long or short names of the rights to be allowed. To view the rights for each category, run zman admin-rights-set --Help | more.
  • -A, --allow-all - Allows all rights of the Rights category.
  • -d, --deny=[right][...] - A comma-separated list of long or short names of the rights to be denied. To view the rights of each category, run zman admin-rights-set --Help | more.
  • -D, --deny-all - Denies all rights of the Rights category.
  • -f, --folder=[folder name] - Full path of a folder. If specified, the path of the objects is determined relative to this folder. This can be used to specify multiple objects under the same folder.
  • -H, --Help - Displays detailed help about the categories of rights available, and the long and short form of rights names within each category. If a category name is specified, help is provided for that category.
admin-store-credential (asc) <ZENworks administrator name>

Stores the ZENworks username and password for use with every command so credentials need not be entered for every command. The credentials are stored on the home directory of the logged-in user and are used only for that logged-in user. In Linux, ensure that the user has a home directory. If you share the same machine login with other ZENworks administrators, you must clear your credentials by using the admin-clear-credential command after you are finished executing commands.

Batch Command

The batch command is a utility command used to execute a list of zman commands from a text file. The commands are executed faster because logging into ZENworks is done only once and not for every command. Batch commands begin with batch- in the long form, or with the letter b in the short form.

This command accepts the option flags listed in the Global Options section. In addition, it accepts individual options as listed with the command.

batch-execute (bex) (file path) [...] [options]

Executes zman commands from text files in a batch (not to be confused with Windows batch files).

(file path) [...] - The path of the text files containing zman commands to be executed. Lines starting with #, rem, REM, ; and // are considered as comments, and are not processed. For a sample file, refer to BatchExecuteCommands.txt located in /opt/novell/zenworks/share/zman/samples/batch on a Linux server or Installation_path:\Novell\Zenworks\share\zman\samples\batch on a Windows server.

Accepts the following option:

  • -e, --exit-on-failure - Stops executing the commands and exits if a command fails partially or totally. A command is said to partially fail for commands that take multiple arguments when the processing of one or more of the arguments was not successful. For example, for bundle-delete, the command is said to partially fail if one of the arguments could not be found or deleted. By default, the commands in the file are executed continuously without checking for failure.

Examples:

  • To execute zman commands in multiple files:

    zman bex c:\filetxt c:\filetxt

    The files are executed in the order of input.

  • To execute zman commands in multiple files but exit when a command fails:

    zman bex /home/user1/file1 /home/user1/file2 -e

    The files are executed in the order of input.

Bundle Commands

These commands are used to create, modify and manage bundles. Bundle commands begin with bundle- in the long form, or with the letter b in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command. These commands apply only to ZENworks Configuration Management.

bundle-add-actions (baa) (bundle path) (action XML file) [...] [options]

Adds actions to a bundle.

(action XML file) [...] - The XML files that contain information for actions to be added. The actions are grouped under one of these action sets: Distribution, Install, Launch, Verify, Uninstall, Terminate. The XML file contains an ActionSet element that contains information of actions to be added for an action set. Multiple XML files can be given as input to add actions to different action sets of the bundle. The XML files can be created by exporting actions of an existing bundle using the bundle-export-actions command.

Accepts the following option:

  • -a, --actioninfo=[content and dependency for actions] - XML file containing content and bundle dependency information for actions that have file content or dependency on another bundle. For example, for Install MSI Action, the MSI file to be installed is the file content. Install Bundle Action takes another bundle as dependency so this data also needs to be specified for proper functioning of these actions. For the XML format template, refer to ActionInfo.xml located in /opt/novell/zenworks/share/zman/samples/bundles on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ bundles on a Windows server.

NOTE:If you choose the action set type as Uninstall, the following options are not supported for Linux bundles and Linux Patch bundles: DaysBeforeUninstallWhenNotUsed, DisplayUninstallMessage, IgnoreUninstallAfterUnassociation, IgnoreChainedDependencies, and AllowToCancelUninstall.

bundle-assign (ba) (device or user type) (bundle or bundle group) (device or user object path) [...] [options]

Assigns a bundle or bundle group to one or more device or user objects.

(device or user type) - Valid values are device, server, workstation, and user.

(device or user object path) [...] - The path of the device or user objects relative to the root folder of the device or user type specified.

Accepts the following options:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
  • -I, --icon-location=[application location XML file] - XML file that contains the locations to place the icon for the bundle application. For the XML file format, refer to IconLocation.xml located in /opt/novell/zenworks/share/zman/samples/bundles on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ bundles on a Windows server.
  • -d, --distribution-schedule=[distribution schedule XML file] - XML file that contains the distribution schedule.
  • -l, --launch-schedule=[launch schedule XML file] - XML file that contains the launch schedule.
  • -a, --availability-schedule=[availability schedule XML file] - XML file that contains the availability schedule. For the schedule XML file templates, refer to the XML files located in /opt/novell/zenworks/share/zman/samples/schedules on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ schedules on a Windows server.
  • -i, --install-immediately - Installs the bundle immediately after distribution. To use this option, you must also specify the Distribution schedule. The Distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -L, --launch-immediately - Launches the bundle immediately after installation. To use this option, you must also specify the Distribution schedule. The Distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -n, --distribute-now - Sets the distribution schedule to distribute the bundle immediately. If this option is specified, the --distribution-schedule and --distribute-on-device-refresh options are ignored. The --distribute-now, --distribute-on-device-refresh, and --distribution-schedule options are mutually exclusive and are used to set the distribution schedule. The --distribute-now option is considered first, followed by --distribute-on-device-refresh and --distribution-schedule.
  • -r, --distribute-on-device-refresh - Sets the distribution schedule to distribute the bundle on device refresh. If this option is specified, the --distribution-schedule option is ignored.
  • -s, --launch-on-device-refresh - Sets the launch schedule to launch the bundle on device refresh. If this option is specified, the --launch-schedule option is ignored.
  • -w, --wakeup-device-on-distribution - Wakes up the device by using Wake-On-LAN if it is shut down while distributing the bundle. To use this option, you must also specify the Distribution schedule. The Distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -B, --broadcast=[Broadcast address][...] - A comma-separated list of addresses used to broadcast the Wake-On-LAN magic packets. This option is used only if you choose to wake up the device by using Wake-On-LAN. A valid IP address is a valid value.
  • -S, --server=[Path of the Primary or Proxy Server objects relative to /Devices][...] - A comma-separated list of Primary or Proxy Server objects used to wake up the device. This option is used only if you choose to wake up the device by using Wake-On-LAN.
  • -C, --retries=[Number of retries] - Number of times the Wake-On-LAN magic packets are sent to the device(s). This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 0 and 5. The default value is 1.
  • -T, --timeout=[Time interval between retries] - The time interval between two retries. This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 2 and 10 (in minutes). The default value is 2.
bundle-copy (bcp) (bundle path) (bundle name) [parent folder] [options]

Copies a bundle.

Accepts the following options:

  • -d, --desc=[description] - Description for the bundle.
  • -i, --icon-file=[bundle icon file] - The path of the image file containing the image that should be used as the bundle icon. If this option is not specified, the contents of the subfolders are not listed.
bundle-create (bc) (bundle name) (bundle XML file) [parent folder] [options]

Creates a new bundle.

(bundle XML file) - XML file containing exported bundle information. Use bundle-export-to-file (betf) to export a existing bundle's information into an XML file. If you want to reuse files, template XML files can be created from bundles that were created through ZENworks Control Center. For a sample XML file, refer to WindowsMSIBundle.xml located in /opt/novell/zenworks/share/zman/samples/bundles on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\bundles on a Windows server.

Accepts the following options:

  • -d, --desc=[description] - Description for the bundle.
  • -a, --actioninfo=[content and dependency for actions] - XML file containing content and bundle dependency information for actions that have file content or dependency on another bundle. For example, for Install MSI Action, the MSI file to be installed is the file content. Install Bundle Action takes another bundle as a dependency. This data also needs to be specified for proper functioning of these actions. For the XML format template, refer to ActionInfo.xml located in /opt/novell/zenworks/share/zman/samples/bundles on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ bundles on a Windows server.
  • -i, --icon-file=[bundle icon file] - The path of the image file containing the image that should be used as the bundle icon.
  • -s, --create-as-sandbox=[create as sandbox] - Creates the bundle as a sandbox.
  • -x, --actions-as-in-xml - Creates default actions for the new bundle as found in the template XML file. For example if you delete Verify Install default action (for the Verify action type) from the bundle and export the bundle information into an XML file, all default actions found in the XML file excluding the Verify Install default action will be created for the new bundle. If you do not specify this option, a bundle will be created with all the default actions including the Verify Install default action which is not found in the XML file.

NOTE:If you choose the action set type as Uninstall, the following options are not supported for Linux bundles and Linux Patch bundles: DaysBeforeUninstallWhenNotUsed, DisplayUninstallMessage, IgnoreUninstallAfterUnassociation, IgnoreChainedDependencies, and AllowToCancelUninstall.

bundle-delete (bd (bundle object path) [...][options]

Deletes one or more bundle objects.

(bundle object path) [...] - The path of the bundle objects (bundle, bundle folder or bundle group) relative to /Bundles. The wildcard * can be used in the object names if it is enclosed in quotation marks. Exercise caution while using wildcards for deleting objects.

Accepts the following options:

  • -r, --recursive - Deletes objects inside a folder recursively.
  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
bundle-delete-version (bdv) (bundle path) [bundle version number] [options]

Deletes one or more versions of the bundle.

[bundle version number] [...] - Version of the bundle to delete.

Accepts the following option:

  • -a --all - Deletes all the older versions of the bundle.
  • -p, --previous - Deletes all the versions of the bundle older than the specified version.

Examples:

To delete the version 5 of the bundle, zenbundle:

zman bdv zenbundle 5

To delete all the versions of the bundle, zenbundle:

zman bdv zenbundle -a

To delete all the versions of the bundle, zenbundle, that are older than the version 3:

zman bdv zenbundle version -p 3

bundle-disable (bdl) (bundle path) [...] [options]

Disables bundles.

Accepts the following option:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
bundle-enable (bel) (bundle path) [...] [options]

Enables bundles.

Accepts the following option:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
bundle-export-actions (bea) (bundle path) (XML file path) (action set type) [action's positions] [...]

Exports the actions added to a bundle's action set to a file. The file can be used as input to the bundle-add-actions command.

(action set type) - The type of the action set. If this option is specified, the actions for only this action set are listed. Valid values are Install, Launch, Verify, Uninstall, Terminate, and Preboot.

NOTE:The Terminate action set is not supported for Linux bundles and Linux Patch bundles.

[action's positions] [...] - A comma-separated list of position of actions in the action set. The first action is at position 1. Use the bundle-list-actions command to see the position of a particular action in an action set. This is optional, but if it is not specified, all the actions in the specified action set are exported.

bundle-export-to-file (betf) (bundle path) (XML file path) [version of the bundle][-c|--export-content]

Exports a bundle's information (in XML format) to a file. The XML file is to be used as input for creating bundles.

(XML file path) - The complete path of the XML file to which the bundle’s information is to be exported.

[version of the bundle] - Version of the bundle to be exported. If it not specified, the published version of the bundle is considered. To export a sandbox version of the bundle, specify sandbox.

[-c|--export-content] - Exports the content of the bundle to a sub directory within the directory containing the XML file to which the bundle’s information is exported. If the option is not specified, the bundle content is not exported.

Examples:

To export the sandbox version of a bundle named zenbundle to an xml file named bundle.xml:

zman betf bundlefolder/zenbundle C:\bundles\bundle.xml sandbox

To export the version 3 of a bundle named zenbundle to an xml file named bundle.xml:

zman betf bundlefolder/zenbundle C:\bundles\bundle.xml 3

To export the version 5 of a bundle named zenbundle to an xml file named bundle.xml and export the bundle’s content to the C:\bundles\bundle_content directory:

zman betf bundlefolder/zenbundle C:\bundles\bundle.xml 5 -c

bundle-folder-create (bfc) (folder name) [parent folder] [options]

Creates a new folder for containing bundles.

Accepts the following option:

  • --desc=[description] - Description for the folder.
bundle-group-add (bga) (bundle group path) (bundle path) [...] [options]

Adds bundles to a bundle group.

Accepts the following option:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
bundle-group-create (bgc) (group name) [parent folder] [options]

Creates a bundle group and adds members to it.

Accepts the following options:

  • --desc=[description] - Description for the group.
  • -m, --members=[bundle path][...] - The path of the bundles relative to /Bundles.
  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
bundle-group-members (bgm) (bundle group path) [options]

Lists members of a bundle group.

Accepts the following option:

  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
bundle-group-remove (bgr) (bundle group path) (bundle path) [...] [options]

Removes bundles from a bundle group.

Accepts the following option:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
bundle-increment-version (biv) bundle path) [...] [options]

Increments the version of bundles. This command is applicable for versions prior to ZENworks 11SP1. In ZENworks 11 SP1or higher, this command is replaced by the bundle-sandbox-publish (bsp) command

Accepts the following option:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
bundle-list (bl) [options] [folder]

Lists bundles objects.

Accepts the following options:

  • -r, --recursive - Lists results recursively including subfolders. If this option is not specified, the contents of the subfolders are not listed.
  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotation marks.
  • -c, --count - Displays the count of the results.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
bundle-list-actions (bla) (bundle path) [action set type]

Lists actions added to a bundle.

[action set type] - The type of the action set. If this option is specified, the actions for only this action set are listed. Valid values are Install, Launch, Verify, Uninstall, Terminate, and Preboot.

NOTE:The Terminate action set is not supported for Linux bundles and Linux Patch bundles.

bundle-list-assignments (blas) (bundle or bundle group) [options]

Lists the device and user assignments for a bundle.

Accepts the following options:

-t, --typefilter=[assignment type] - Filters on the assignment type. Valid values are device and user.

-s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.

bundle-list-groups (blg) (bundle path) [options]

Lists the bundle groups of which the given bundle is a member.

Accepts the following options:

-s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.

Examples:

To list all the bundle groups that bundle1 belongs to with five results displayed at a time:

zman blg bundlefolder/bundle1 -s 5

bundle-list-version (blv) (bundle path)

Lists all the versions of the bundle.

Examples:

To list all the versions of the bundle, zenbundle:

zman blv zenbundle

bundle-move (bmv) (bundle object path) [destination folder path]

Moves a bundle object to a different folder.

bundle-remove-actions (bra) (bundle path) (action set type) [action's positions] [...]

Removes actions from a bundle.

(action set type) - The type of the action set that contains the action. Valid values are Install, Launch, Verify, Uninstall, Terminate, and Preboot.

NOTE:The Terminate action set is not supported for Linux bundles and Linux Patch bundles.

[action's positions] [...] - A comma-separated list of position of actions in the action set. The first action is at position 1. Use the bundle-list-actions command to see the position of a particular action in an action set. This is optional, but if it is not specified, all the actions in the specified action set are removed.

bundle-rename (br) (bundle object path) (new name) [options]

Renames a bundle object.

  • -p, --publish =[publish] - If this option is specified and the display name of the bundle is edited, the bundle is immediately published. However, if the current display name of the bundle is different from the existing bundle name or if a sandbox already exists for the bundle, specifying this option will have no effect.
bundle-reorder-actions (broa) (bundle path) (action set type) (current position) (new position)

Reorders actions in the action set of a bundle.

(action set type) - The type of the action set that contains the action. Valid values are Install, Launch, Verify, Uninstall, Terminate, and Preboot.

NOTE:The Terminate action set is not supported for Linux bundles and Linux Patch bundles.

bundle-sandbox-create (bsc) (bundle path) [version of the bundle] [options]

Creates a sandbox from an existing version of a bundle

[version of the bundle] - Specify the version of the bundle to be used for creating the sandbox.

Accepts the following option:

  • -f, --force =[force] - Overwrites any existing sandbox.

Example:

To create a sandbox from the version 2 of a bundle, zenbundle:

zman bsc zenbundle 2

bundle-sandbox-publish (bsp) (bundle path) [options]

Publishes a sandbox to create a published version.

Accepts the following option:

  • -f, --force =[force] - If a primary bundle has dependent child bundles with the sandbox only version, you must specify this option to publish the changes made both to the primary and the dependent bundles. If you do not specify this option, the publish of the primary bundle also fails.
  • -c, --allChild =[all children] - If a primary bundle has dependent child bundles with the sandbox version, you can specify this option to publish the changes made both to the primary and the dependent child bundles.
  • -i, --incAllParent =[increment all parents] - If a primary bundle has parent bundles, you can specify this option to increment the version of the parent bundle to apply the newly published changes made to the primary bundle to the devices that are assigned to the parent bundles.
  • -p, -forceParent =[force parent] - If a primary bundle has parent bundles and you choose to increment the version of the parent bundle, then you must specify this option to publish any of the parent bundles which already have a sandbox version.

Examples:

To publish the sandbox version of a bundle, zenbundle:

zman bsp zenbundle

To publish the sandbox version of a bundle named zenbundle1 along with all its dependent bundles:

zman bsp zenbundle1 -f -c

bundle-sandbox-publish-to-newbundle (bsptn) (bundle path) (bundle name) [parent folder] [options]

Publishes a sandbox to a new bundle.

Accepts the following option:

  • -s, --createAsSandbox =[create as sandbox] - Create the bundle as a sandbox.
  • -g, --groups - Adds the newly created bundle to all the groups which the primary bundle is member of.
  • -d, --deviceAssignments - Copies all the device assignments from the primary bundle to the new bundle.
  • -u, --userAssignments - Copies all the user assignments from the primary bundle to the new bundle.
  • -f, --force =[force] - If a primary bundle has dependent child bundles with the sandbox only version, you must specify this option to publish the changes made both to the primary and the dependent bundles. If you do not specify this option, the publish of the primary bundle also fails.
  • -c, --allChild =[all children] - If a primary bundle has dependent child bundles with the sandbox version, you can specify this option to publish the changes made both to the primary and the dependent child bundles.
  • -i, --incAllParent =[increment all parents] - If a primary bundle has parent bundles, you can specify this option to increment the version of the parent bundle to apply the newly published changes made to the primary bundle to the devices that are assigned to the parent bundles.
  • -p, -forceParent =[force parent] - If a primary bundle has parent bundles and you choose to increment the version of the parent bundle, then you must specify this option to publish any of the parent bundles which already have a sandbox version.
  • -n, -depsToNewFolder =[publish Dependents bundles to new folder] -Path of the bundle folder in which the dependent bundles are published as new bundles. This folder should not contain any of the dependent bundle selected to be published because the new bundle is published with the same name as the original dependent bundle.

Examples:

To publish the sandbox version of a bundle named zenbundle1 as a new bundle named zenbundle2:

zman bsptn zenbundle1 zenbundle2 /Bundles/Folder1

To publish the sandbox version of a bundle named zenbundle1 as a new bundle named zenbundle2 and publish the dependent bundles of zenbundle1 as new bundles:

zman bsptn zenbundle1 zenbundle2 /Bundles/Folder1 depsToNewFolder=/Bundles/Folder2

bundle-sandbox-revert (bsr) (bundle path)

Deletes the sandbox and reverts to the latest version of the bundle.

Example:

To delete the sandbox of a bundle, zenbundle and revert to the latest version of the bundle:

zman bsr zenbundle

bundle-unassign (bua) (device or user type) (bundle or bundle group) (device or user object path) [...] [options]

Unassigns a bundle or bundle group from one or more device or user objects.

(device or user type) - Valid values are device, server, workstation, and user.

(device or user object path) [...] - The path of the device or user objects relative to the root folder of the device or user type specified.

Accepts the following option:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
bundle-update-assignment (bupa) (device or user type) (bundle or bundle group) (device or user object path) [...] [options]

Updates the assignment between a bundle or bundle group and device or user objects.

(device or user type) - Valid values are device, server, workstation, and user.

(device or user object path) [...] - The path of the device or user objects relative to the root folder of the device or user type specified.

Accepts the following options:

  • -f, --folder=[device or user folder] - The path of the device or user folder relative to the respective root folder. If this option is specified, the path of the device or user objects is determined relative to this folder. This can be used to specify multiple device or user objects with the same folder.
  • -I, --icon-location=[application location XML file] - XML file that contains the locations to place the icon for the bundle application. For the XML file format, refer to IconLocation.xml located in /opt/novell/zenworks/share/zman/samples/bundles on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ bundles on a Windows server.
  • -d, --distribution-schedule=[distribution schedule XML or NoSchedule] - XML file that contains the distribution schedule or NoSchedule if the schedule must be removed.
  • -l, --launch-schedule=[launch schedule XML file or NoSchedule] - XML file that contains the launch schedule or NoSchedule if the schedule must be removed.
  • -a, --availability-schedule=[availability schedule XML file or NoSchedule] - XML file that contains the availability schedule or NoSchedule if the schedule must be removed. For the schedule XML file templates, refer to the XML files located in /opt/novell/zenworks/share/zman/samples/schedules on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ schedules on a Windows server.
  • -i, --install-immediately=[yes or no] - Install the bundle immediately after distribution, or remove the same option set during bundle assignment. Valid values are true or yes, and false or no.
  • -L, --launch-immediately=[yes or no] - Launch the bundle immediately after installation, or remove the same option set during bundle assignment. Valid values are true or yes, and false or no.
  • -n, --distribute-now=[yes or no] - Sets the distribution schedule to distribute the bundle immediately. If this option is specified, the --distribution-schedule and --distribute-on-device-refresh options are ignored. The --distribute-now, --distribute-on-device-refresh, and --distribution-schedule options are mutually exclusive and are used to set the distribution schedule. The --distribute-now option is considered first, followed by --distribute-on-device-refresh and --distribution-schedule.
  • -r, --distribute-on-device-refresh=[yes or no] - Sets the distribution schedule to distribute the bundle on device refresh, or removes the same option set during bundle assignment. Valid values are true or yes, and false or no. If this option has the value true or yes, the ‑‑distribution-schedule option is ignored and any previously set distribution schedule is overwritten.
  • -s, --launch-on-device-refresh=[yes or no] - Sets the launch schedule to launch the bundle on device refresh. If this option is specified, the --launch-schedule option is ignored.
  • -w, --wakeup-device-on-distribution=[yes or no] - Wakes up the device by using Wake-On-LAN if it is shut down while distributing the bundle, or removes the same option set during bundle assignment. Valid values are true or yes, and false or no.
  • -B, --broadcast=[Broadcast address][...] - A comma-separated list of addresses used to broadcast the Wake-On-LAN magic packets. This option is used only if you choose to wake up the device by using Wake-On-LAN. A valid IP address is a valid value.
  • -S, --server=[Path of the Primary or Proxy Server objects relative to /Devices][...] - A comma-separated list of Primary or Proxy Server objects used to wake up the device. This option is used only if you choose to wake up the device by using Wake-On-LAN.
  • -C, --retries=[Number of retries] - Number of times the Wake-On-LAN magic packets are sent to the devices. This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 0 and 5. The default value is 1.
  • -T, --timeout=[Time interval between retries] - The time interval between two retries. This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 2 and 10 (in minutes). The default value is 2.
bundle-view-advanced-deployment-status (bvads) (bundle path) [options]

Displays advanced deployment status of a bundle.

Accepts the following options:

  • -d, --device=[device path] - Displays the deployment status only for the specified device. The path of the device is relative to /Devices.
  • -u, --user=[user path] - Displays the deployment status only for the specified user. The path of the user is relative to /Users. If device is also specified, status details for the specified user logged into the specified device are displayed.
  • -n, --namefilter=[target device name] - Filters on the name of the device. Displays options matching the specified filter. The wildcards * and ? can be used if they are enclosed in quotations.
  • --statusfilter=[status type][...] - Filters on the status of Bundle Distribution and Install Events. Valid values are S, F, and P (Success, Failure, and Pending). A comma-separated list of status types can be given.
  • -t, --typefilter=[target device or user type][...] - Filters on the type of the target. Valid values are server, workstation, and user. A comma-separated list of target type can be given.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
bundle-view-assignment-schedule (bvas) (device or user type) (bundle or bundle group) (device or user object path)

Displays the deployment schedules for a bundle assigned to a device or user object.

(device or user type) - Valid values are device, server, workstation, and user.

(device or user object path) [...] - The path of the device or user objects relative to which the bundle group is assigned.

bundle-view-summary-totals (bvst) (bundle path)

Displays a summary of the deployment status of a bundle.

linux-export-actions (lea) (Action Type) (Action XML File path) (Content Files location Path) [options]

Creates an XML file to export package metadata. Use the baa command to add the exported content to the server.

  • (Action Type) - Specify the action for which you want to create the XML file. The supported action types are Install RPM and Distribute RPM.
  • (Action XML File path) - Location of the generated Action Definition XML file.
  • (Content Files location Path) - Location of the RPM content files on the local machine.

Accepts the following option:

  • -t, --target - Specify a valid linux distribution target for packages.
bundle-appdata-calculation (bac) (bundle path or bundle GUID) [...]

Queues a loader action that will calculate and cache application data for bundles, and waits until the action is fully executed. The cached data will be used to prepare web service responses and enhance performance.

NOTE:The zman bac command is applicable only for Patch Policies within ZENworks Patch Management.

Bundle Settings Commands

These commands are used to set and modify bundle settings. Settings commands begin with settings- in the long form, or with the letter s in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

bundle-settings-copy (bscp) (source bundle or bundle folder path) (destination bundle or bundle folder path) [...] [options]

Copies settings.

(source bundle or bundle folder path) - The path of the bundle or bundle folder relative to /Bundles from which settings have to be copied.

(destination bundle or bundle folder path) [...] - The path of the bundles or bundle folders relative to /Bundles to which settings must be copied.

Accepts the following option:

  • -n, --names=[settings name][...] - Names of the settings to be copied from the source path. If this option is not specified, all settings defined at the source path are copied.
bundle-settings-export-to-file (bsetf) [options] (XML file path) [settings name] [...]

Exports settings data (in XML format) to a file. The XML file is to be used as input for creating or modifying settings.

(XML file path) - The file into which the settings data is stored in XML format. If the file does not exist, a new file is created.

[settings name] [...] - Names of the settings to be exported. If this option is not specified, all settings are exported.

Accepts the following options:

  • -s, --source=[source bundle or bundle folder path] - The path of the bundle or bundle folder relative to /Bundles from which settings must be exported. If this option is not specified, settings are exported from the Zone.
  • -e, --effective - If specified, the effective settings are retrieved; otherwise, only the settings defined or overridden at the source path are retrieved.
bundle-settings-revert (bsrt) (source bundle or bundle folder path) (settings name) [...]

Reverts the settings to that of the parent folder.

(source bundle or bundle folder path) - The path of the bundle or bundle folder relative to /Bundles, whose settings must be reverted.

bundle-settings-set (bss) (XML file path) [destination bundle or bundle folder path] [...]

Sets settings at various levels.

(XML file path) - XML file containing exported settings information. Use settings-export-to-file (setf) to export settings information into a XML file.Accepts the following options:

[settings name] [...] - Names of the settings to be exported. If this option is not specified, all settings are exported.

  • -f, --force - Forces all children (subfolders and individual bundles) to inherit these settings.
  • -s, --source=[source bundle or bundle folder path] - The path of the bundle or bundle folder relative to /Bundles for which settings have to be set. If this option is not specified, settings are set at the Zone level.

Certificate Authority Commands

These commands are used to manage the certificate authority role of ZENworks servers. Certificate authority commands begin with certificate-authority- in the long form, or with the letters ca in the short form.

certificate-authority-export (certificate-authority-export/cae) (file path) [options]

Exports the key-pair credentials of the zone certificate authority to a file, and optionally disables the Certificate Authority role of the local server.

Accepts the following option:

  • -d, --disable-CA-role - Removes the Certificate Authority role of the local server.
certificate-authority-import (certificate-authority-import/cai) (file path)

Imports the key-pair credentials of the zone certificate authority from a file and enables the Certificate Authority role on the local server.

certificate-authority-role-disable (card)

Disables the Certificate Authority role on the local server.

certificate-authority-role-enable (care)

Enables the Certificate Authority role on the local server.

Credential Commands

These commands are used to manage the credentials needed for certain ZENworks actions and tasks that require authentication to resources. Credential commands begin with credentials- in the long form, or with the letters cr in the short form.

credentials-create (crc) (credentialName [folder]) (--username) [--password] [--desc]

Creates credentials.

Accepts the following options:

  • -u, --user - The username to access the resource.
  • --password - The password used to access the resource.
  • -d, --desc - A description of the credential.
credentials-delete (crd) (credentialPath)

Deletes credentials.

credentials-folder-create (crf) (folder name) [parent folder] [options]

Creates a new folder for containing credentials.

Accepts the following option:

  • --desc=[description] - Description for the folder.
credentials-list (crl) [folder]

Lists credentials.

credentials-move (crm) (credential name) [destination folder path]

Moves a credential.

credentials-rename (crr) (credentialPath) (newcredentialPath)

Renames credentials.

credentials-update (cru) (--username) [--password] [--desc]

Creates credentials.

Accepts the following options:

  • -u, --user - The username to access the resource.
  • --password - The password used to access the resource.
  • -d, --desc - A description of the credential.

Database Commands

These commands are used to manage the embedded Sybase SQL Anywhere database. Database commands begin with database- in the long form, or with the letter d in the short form.

NOTE:These commands cannot be used to manage an external Sybase SQL Anywhere database.

database-get-credentials-audit (dgca)

Retrieves the credentials used to connect to the Audit Embedded Sybase SQL Anywhere database.

database-backup (db) (backup directory) [schedule SQL file] [options]

Backs up the embedded Sybase SQL Anywhere database and also allows you to schedule the backup operation.

(backup directory) - The local directory on the database server or the network location where the database files are backed up. Ensure that the parent directory already exists and has sufficient disk space. Any existing database files in the directory are overwritten.

[schedule SQL file] - File that contains the schedule for backing up the database. The SQL file can contain CREATE EVENT, ALTER EVENT, or DROP EVENT SQL statements. For sample SQL files, refer to the files located in /opt/novell/zenworks/share/zman/samples/database on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\database on a Windows server. If you do not specify a schedule file, the database is backed up immediately. For more information on defining schedules, refer to the SQL Anywhere documentation at http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.dbdaen10/html/title.htm.

Accepts the following option:

  • -d, --dir-name=[SQL function call] - SQL function call that returns a value. The value is appended to the backup directory path. For example, if this command runs on Tuesday with the backup directory specified as c:\ and the value for this option specified as DAYNAME(now()), the files are backed up to c:\Tuesday.
database-get-credentials (dgc)

Retrieves the credentials used to connect to the embedded Sybase SQL Anywhere database.

Deployment Commands

These commands are used to perform deployment tasks. Deployment commands begin with deployment- in the long form, or with the letters dp in the short form.

deployment-task-abort (dpta) (deployment task name) [...]

Aborts the deployment task.

deployment-task-create (dptc) (deployment task name) (user credential file) [IP address/DNS name] [...] [options]

Creates a deployment task to deploy the ZENworks Adaptive Agent to devices by using the IP address or DNS name.

(user credential file) - The path of the file containing the credentials to connect to the device. Each line in the file should have a username and password separated by a space. For example, administrator password.

Accepts the following options:

  • -f, --file=[IP address file][...] - A comma-separated list of file paths containing the IP addresses or DNS names of devices to which the ZENworks Adaptive Agent should be deployed. The file can contain a list of IP addresses or DNS names of devices in comma-separated-value (CSV) format, or one IP address or DNS name on each line.
  • -s, --schedule=[launch schedule XML file] - XML file that contains the launch schedule. For the schedule XML file templates, refer to the XML files located in /opt/novell/zenworks/share/zman/samples/schedules on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ schedules on a Windows server. If the schedule file or the --run-now option is not specified, the task is not scheduled to run.
  • -r, --run-now - Schedules the deployment task to run immediately after creation.
  • -b, --reboot=[Reboot option] - Indicates when the device must be rebooted after deploying the agent. Valid values are immediate and manual.
  • -d, --desc=[description] - Description for the deployment task.
  • -p, --proxy=[Windows Proxy] - The path of a Windows device relative to /Devices. In order to deploy management agents to Microsoft Windows devices from a Linux Primary Server, a managed device running Microsoft Windows is needed. Ignore this option if you are running the deployment task from a Windows Primary Server.
  • -t, --timeout=[Time out] - The number of seconds you want the Primary Server to wait for a response from the Windows Proxy.
  • -k, --key=[Registration key] - Registration key for registering the device.
deployment-task-delete (dptd) (deployment task name) [...]

Deletes the deployment task.

deployment-task-list (dptl) [options]

Lists the deployment tasks and the status.

Accepts the following options:

  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotations marks.
  • -c, --count - Displays the count of the results.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
deployment-task-run-now (dptrn) (deployment task name) [...]

Schedules the specified deployment task to run immediately. The task should have the credentials saved in the data store.

Discovery Commands

These commands are used to view device discovery-related information. Discovery commands begin with discovery- in the long form, or with the letter d in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

discovery-view-discovered-devices (dvdd) [options]

Lists the discovered devices.

Accepts the following options:

  • -n, --nameFilter=[filter string] - Displays the devices matching the specified filter. The wildcard * can be used if it is enclosed in quotations.
  • -t, --typefilter=[type filter] - Displays options matching the specified type. Valid values are server, workstation, printer, network, thinclient, other, unknown, and deployable. If this option is not specified, all types of devices are displayed.
  • -o, --osfilter=[operating system] - Displays devices having the specified OS installed. Valid values are other, win9x, winnt, wince, win2k, win2k3, winxp, nw6, nw6_5, nwoes, suse, sles, nld, rh_es, and rh_as. If this option is not specified, all devices are displayed.
  • -m, --management-status=[management status] - Displays devices having the specified status. Valid values are discovered, inventoried, managed, and retired. If this option is not specified, all types of devices are displayed regardless of their status.
  • --modefilter=[discovery mode] - Displays the devices discovered by using the specific discovery mode. Valid values are IP, LDAP, csvimport, ZENworks-migration, and ZAM-migration. If this option is not specified, all devices are displayed.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
discovery-task-list (dtl) [options]

Lists the discovery tasks and the status.

Accepts the following options:

  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotation marks.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
discovery-task-run-now (dtrn) (discovery task name)

Executes the specified discovery task immediately.

Dynamic Group Commands

These commands are used to view dynamic groups, group members, and to refresh a group. Dynamic group commands begin with dynamic-group- in the long form, or with the letters dg in the short form.

dynamic-group-list (dgl) (device type) [folder] [-n|--namefilter=filter string] [-s|--scrollsize=scroll size] [-r|--recursive] [-c|--count]

Lists the dynamic groups.

Accepts the following options:

  • (device type) - Valid values are server and workstation.
  • [folder] - Lists the content of the specified folder. If it is not specified, the content of the root folder is displayed.
  • [-n|--namefilter=filter string] - Displays the results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotation marks.
  • [-s|--scrollsize=scroll size] - Number of results to be displayed at a time.
  • [-r|--recursive] - Lists the results recursively, including subfolders. If it is not specified, the contents of subfolders are not listed.
  • [-c|--count] - Displays the count of the results.
dynamic-group-members (dgm) (device type) (dynamic group name) [path of the dynamic group folder] [-s|--scrollsize=scroll size]

Lists the members of the specified dynamic group.

Accepts the following options:

  • (device type) - Valid values are server and workstation.
  • (dynamic group name) - Name of the dynamic group.
  • [path of the dynamic group folder] - The path of the dynamic group. You can specify either the complete path or the relative path of the root folder.
  • [-s|--scrollsize=scroll size] - Number of results to be displayed at a time.
dynamic-group-refresh (dgr) (device type) [(dynamic group name) (dynamic group name)... (dynamic group name)] [-f|--folder=folder name including path of the dynamic group folder] [-a|--all]

Refreshes the specified dynamic group.

Accepts the following options:

  • (device type) - Valid values are server and workstation.
  • (dynamic group name) - Name of the dynamic group. You can list multiple groups.
  • [-f|--folder=folder name including path of the dynamic group folder] - Dynamic group folder’s name, including its full path.
  • [-a|--all] - Refresh all existing dynamic groups.
dynamic-group-view-query (dgvq) (path of the dynamic group folder)

Lists the filters for the specified dynamic group.

(path of the dynamic group folder) - Path of the dynamic group. You can either specify the complete path or the relative path of the root folder

Endpoint Security Management Commands

These commands are used to import and export security policies and to export a Management Zone’s security policy encryption key (KMK). They apply only to ZENworks Endpoint Security Management.

All of the commands below accept the option flags listed in the Global Options section, with the exception that the esmpolicy-export-to-file and esmpolicy-import commands cannot be run remotely and therefore do not accept the --host option.

esmpolicy-export-to-file (epetf) (policy path) (XML policy file path)

Exports a security policy's information to an encrypted XML policy file. The XML policy file can be used to import the policy to the same Management Zone or a different Management Zone.

NOTE: To import a policy, you must also supply the zone’s security policy encryption key (KMK) so that the encrypted XML policy file can be decrypted. Use the esmpolicy-export-kmk-to-file command to create the key file.

(policy path) - The path (including the filename) of the policy object relative to the Policies root folder. For example, FWpolicy1 or ESMpolicies/DEpolicy4.

(XML policy file path) - The path (including the filename) where you want to save the XML policy file. If you specify a filename only, the file is saved to the current directory. For example, firewallpolicy.xml or c:\firewallpolicy.xml.

Examples:

zman epetf FWPolicy1 c:\FWpolicy1.xml

zman epetf ESMpolicies/DEpolicy4 DEpolicy4.xml

esmpolicy-export-kmk-to-file (epektf) (policy encryption key file path)

Exports the Management Zone’s security policy encryption key (KMK) to a file. The key file is required to decrypt an XML policy file (that was exported from a policy in the zone) when importing the policy with the esmpolicy-import command.

(policy encryption key file path) - The path (including filename) where you want to save the security policy encryption key (KMK) file. If you specify a filename only, the file is saved to the current directory. Use any supported filename for the file. The extension is not important; you can use any extension or no extension. For example, KMK.txt, key.xml, KMK, and decryption.file are all valid filenames.

Examples:

zman epektf c:\key.txt

zman epektf EncryptionKey.xml

esmpolicy-import (epi) (policy name) (policy encryption key file path) (XML policy file path) [parent folder]

Imports a security policy from an encrypted XML file created by the esmpolicy-export-to-file command.

(policy name) - The name to assign to the policy object.

(policy encryption key file path) - The full path (including filename) of the security policy encryption key (KMK) file for the Management Zone from which the policy was exported. This file is required to decrypt the encrypted XML file. If the key file is in the current directory, specify the filename only.

(XML policy file path) - The full path (including filename) of the encrypted XML policy file. If the file is in the current directory, specify the filename only.

[parent folder] - The Policies folder in which to create the policy object. If you want to create the object in the root folder, ignore this option.

Examples:

zman epi FWPolicy c:\key.txt c:\FWpolicy.xml

zman epi DEPolicy key.txt encryptionpolicy.xml esmpolicies/encryption

esmpolicy-purge-effective-policies (epep) [(device path)(device path)...(device path)] [-b|--begin-date=yyyy-MM-dd HH:mm:ss] [-e|end-date=yyyy=MM-dd HH:mm:ss] [-u|--unregisteredDevices]

Purges effective policy report records from the ZENworks database. The following options can be used to target report records for specific devices or for specific time periods.

[(device path) (device path) ... (device path)]: To purge the effective policy report records for specific devices, specify the full path for each device. Ignore this option to purge reports for all devices.

[-b|--begin-date=yyyy-MM-dd HH:mm:ss]: To purge effective policy report records starting with a specific date, specify the begin date. All records with a timestamp on or after the begin date are purged. Use this option with the end-date option to designate a specific time period.

[-e|--end-date=yyyy=MM-dd HH:mm:ss]: To purge effective policy report records up to a specific date, specify the end date. All records with a timestamp on or before the end date are purged. Use this option with the begin-date option to designate a specific time period.

[-u|--unregisteredDevices]: Purge effective policy report records for devices that are no longer registered in the zone but that still have report data in the ZENworks database.

Examples:

zman epep /Devices/Workstations/device1

zman epep /Devices/Workstations/device1 -b "2010-10-10 10:10:10" -e "2010-12-31 24:00:00"

zman epep -u

Full Disk Encryption Commands

These commands apply only to ZENworks 11 Full Disk Encryption. In addition to the parameters listed below, the commands accept the option flags listed in the Global Options section.

fdepolicy-purge-eri (fpe) [(device path)(device path)...(device path)] [-b|--begin-date=yyyy-MM-dd HH:mm:ss] [-e|end-date=yyyy=MM-dd HH:mm:ss] [-u|--unregisteredDevices]

Purges emergency recovery information (ERI) records from the ZENworks database. The following options can be used to target records for specific devices or for specific time periods.

[(device path) (device path) ... (device path)]: To purge the ERI records for specific devices, specify the full path for each device. Ignore this option to purge reports for all devices.

[-b|--begin-date=yyyy-MM-dd HH:mm:ss]: To purge ERI records starting with a specific date, specify the begin date. All records with a timestamp on or after the begin date are purged. Use this option with the end-date option to designate a specific time period.

[-e|--end-date=yyyy=MM-dd HH:mm:ss]: To purge ERI records up to a specific date, specify the end date. All records with a timestamp on or before the end date are purged. Use this option with the begin-date option to designate a specific time period.

[-u|--unregisteredDevices]: Purge ERI records for devices that are no longer registered in the zone but that still have report data in the ZENworks database.

Examples:

zman fpe /Devices/Workstations/device1

zman fpe /Devices/Workstations/device1 -b "2010-10-10 10:10:10" -e "2010-12-31 24:00:00"

zman fpe -u

fdepolicy-export-to-file (fpetf) (policy path) (XML policy file path)

Exports a full disk encryption policy's information to an encrypted XML policy file. The XML policy file can be used to import the policy to the same Management Zone or a different Management Zone.

NOTE: To import a policy, you must also supply the zone’s full disk encryption policy encryption key (KMK) so that the encrypted XML policy file can be decrypted. Use the fdepolicy-export-kmk-to-file command to create the key file.

(policy path) - The path (including the filename) of the policy object relative to the Policies root folder. For example, FDEpolicies/FDEpolicy4.

(XML policy file path) - The path (including the filename) where you want to save the XML policy file. If you specify a filename only, the file is saved to the current directory. For example, FDEpolicy.xml.

Example:

zman fpetf FDEPolicy1 c:\FDEpolicy1.xml

fdepolicy-import (fpi) (policy name) (policy encryption key file path) (XML policy file path) [parent folder]

Imports a full disk encryption policy from an encrypted XML file created by the fdepolicy-export-to-file command.

(policy name) - The name to assign to the policy object.

(policy encryption key file path) - The full path (including filename) of the full disk encryption policy encryption key (KMK) file for the Management Zone from which the policy was exported. This file is required to decrypt the encrypted XML file. If the key file is in the current directory, specify the filename only.

(XML policy file path) - The full path (including filename) of the encrypted XML policy file. If the file is in the current directory, specify the filename only.

[parent folder] - The Policies folder in which to create the policy object. If you want to create the object in the root folder, ignore this option.

Example:

zman fpi FDEPolicy c:\key.txt c:\FDEpolicy.xml

fdepolicy-export-kmk-to-file (fpektf) (policy encryption key file path)

Exports the Management Zone’s full disk encryption policy encryption key (KMK) to a file. The key file is required to decrypt an XML policy file (that was exported from a policy in the zone) when importing the policy with the fdepolicy-import command.

(policy encryption key file path) - The path (including filename) where you want to save the full disk encryption policy encryption key (KMK) file. If you specify a filename only, the file is saved to the current directory. Use any supported filename for the file. The extension is not important; you can use any extension or no extension. For example, KMK.txt, key.xml, KMK, and decryption.file are all valid filenames.

Examples:

zman fpektf c:\key.txt

zman fpektf EncryptionKey.xml

Hotlist Command

This command is used to view the list of devices that have unacknowledged warnings or errors. The Hotlist command begin with hotlist- in the long form, or with the letter hl in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

hotlist-view (hlv) [options]

Lists devices that have unacknowledged warnings or errors.

Accepts the following options:

  • -c, --count - Displays only the count of the hotlist items.
  • -t, --type=[error type] - Filters on the error type of hotlist items. Valid values are Noncompliant, Critical, and Warning.
  • -o, --operator=[comparison operator] - If specified, this operator is used in error-count-based filtering. Valid values are >, >=, =, <, and <=. Enclose the operators in double quotation marks so that > and < are not considered by the system as redirection operators.
  • -e, --errorcount=[erorr count] - Filter by the count of the error type specified. If the comparison operator is not specified, the >= is used by default. If error type is not specified, the count is taken as the sum of noncompliant, critical and warning errors.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time. Warning or errors can be acknowledged by using the messages-acknowledge command. When all warnings or errors for a device are acknowledged the messages no longer appear on the hotlist.

Intel AMT Commands

These commands are used to perform Preprovisioning, Provisioning, and Management operations on the Intel AMT devices. The Intel AMT commands begin with iamt- in the long form, or with the letter i in the short form.

The supported iAMT versions in ZENworks are 3, 4, 5, and 6.

iamt-root-certificate-hash (irch)

Prints the ZENworks Root Certificate hash.

iamt-create-mgmtcert (icmc) [options]

Creates or imports the Intel AMT Provisioning or Management Certificate in the .DER format on every Primary Server that is used as an iAMT Provisioning or Management Server.

Accepts the following options if you are importing an external certificate:

  • -p|--certpath - Specify the path of the Intel AMT Provisioning / Management Certificate that is signed by the External CA. The certificate should be in the .DER format

For example, to import an external certificate, run the following command:

iamt-create-mgmtcert (icmc) [-p|--certpath=Intel AMT Provisioning/Management Certificate_path_in_.DER format]

iamt-create-csr (icc) (isCA) (type) [options]

Creates the Certificate Request for the Intel AMT Provisioning / Management Server or the AMT device in an External CA environment.

  • isCA - The valid values are True or False. If true, the Certificate Request generates the certificate for the Intel AMT Management Zone.
  • Type - Valid values are mgmt or device. The Certificate Request is created for the Management Zone or for specific devices in the Management Zone.

Accepts the following options:

  • -c, --country=[country name] - Specify the name of the country.
  • -s, --state=[state name] - Specify the name of the state.
  • -o, --organization=[organization name] - Specify the name of the organization.
  • -u, --orgunit=[Organization Unit] - Specify the organization unit.
  • -n, --commonname=[Common name] - Specify the common name of the certificate.
  • -d, --destination-folder=[Destination Folder]: Specify the path of the destination folder where you want to copy the Certificate Signing Request file.
iamt-clear-mgmtcert (idmc)

Clears the Intel AMT Provisioning / Management Certificate.

iamt-cacert-import (icai) [isclear] [options]

Imports the External CA or its subordinate CA on the server.

  • [isclear] - The valid values are True or False. If true, the imported External CA or its subordinate CA is deleted.

Accepts the following options if you are importing an External CA or its subordinate CA:

  • -i|--inform - Specifies whether the certificate format is PEM or DER.
  • -p|--cacertpath - Specifies the certificate path.

Imaging Command

These commands are used to perform Imaging operations. Imaging commands begin with imaging- in the long form, or with the letter i in the short form.

Accepts the following options:

  • (Device type) - Valid values are server and workstation.
  • (Device name) - Name of the server or workstation object.

For example, to apply the assigned Imaging bundle to a server with the name server1, run the following command:

zman iaaib server server1

If the device object is located within a folder, use the following command:

iaaib (Device type) (folder/path of device)/(Device name)

where folder/path of device is the relative path of the device within the Workstation or Server folder.

Inventory Commands

These commands are used to initiate scans and send an inventory data collection form to the managed devices. Inventory commands begin with inventory- in the long form, or with the letter i in the short form.

inventory-collection-wizard-run-now (icwrn) (device object path) [...] [options]

Sends the inventory data collection form to one or more devices.

Accepts the following option:

  • -f, --folder=[device folder] - The path of the device folder relative to /Devices. If this option is specified, the path of the device objects is determined relative to this folder. This option can be used to specify multiple device objects under the same folder.
(inventory-scan-now|isn) (<device object path> <device object path>...<device object path>) [options]

Initiates an inventory scan of one or more devices.

Accepts the following option:

  • -f, --folder=[device folder] - The path of the device folder relative to /Devices. If this option is specified, the path of the device objects is determined relative to this folder. This option can be used to specify multiple device objects under the same folder.
(inventory-import-localproducts|iilp) (pathname) [dokbmerge]

Imports the administrator-defined local products and product fingerprints. Only administrators with CDLP rights can import the local products.

  • dokbmerge - To trigger KB merge after importing local product(s).

To import product data:

zman iilp {pathname} [-U (Administrator)] [-P (password)].

Example:

To import administrator-defined local products to ZENworks Configuration Management from a file in ./output/lpimports.txt:

zman iilp ./output/lpimports.txt -U Administrator -P novell.

(inventory-export-localproducts|ielp) (pathname) [-U (Administrator)] [-P (password)]

Exports the administrator-defined local products and product fingerprints. Only administrators with CDLP rights can export the local products.

To export product data:

zman ielp {pathname} [-U (Administrator)] [-P (password)].

Example:

To export all administrator-defined local products from ZENworks Configuration Management to a file in ./output/lpexports.txt:

zman ielp ./output/lpexports.txt -U Administrator -P novell.

License Commands

These commands are used to activate your ZENworks server or to display licensing information. License commands begin with license- in the long form, or with the letter l in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

license-activate (la) (product name) (license key)

Activates the ZENworks products (Asset Inventory for Unix/Linux, ZENworks Configuration Management, ZENworks Asset Management, ZENworks Full Disk Encryption, ZENworks Endpoint Security Management) or the ZENworks Suite.

license-deactivate (ld) (product name)

Deactivates the ZENworks products. Only the product name is needed as an argument.

license-info (li)

Displays the licensing information.

license-refresh (lr)

Forces the system to refresh the stored license cache, which is normally updated once per day. Use this command to update the cache at any time, such as when an evaluation license might expire and the cache doesn’t yet reflect that.

license-show-active-components (lsac)

Lists the current license states of all known ZENworks Configuration Management components and DataModel plug-ins (two separate lists).

Location Commands

These commands are used to view and manage locations. A location consists of one or more network environments. When the ZENworks Adaptive Agent determines that its current environment matches a network environment associated with a location, the agent enforces any security policies and closest server rules assigned to the location.

Location commands begin with location- in the long form, or with the letter l in the short form. All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

location-audit-upload (lau) (location name) (state)

Configures the audit data upload for a specified location.

(location name) - The name of the location.

(state) - Select the state:

  • 1 to enable devices in the associated location to upload audit event data to any Satellite Server (Collection role) or Primary Server.

  • 2 to disable devices in the associated location from uploading audit event data to any Satellite Server (Collection role) or Primary Server.

location-create (lc) (location name) [-d|--desc=<description>] [network environment name] [...]

Creates a location and (optionally) assigns network environments to the location.

(location name) - The name you want assigned to the new location.

-d, --desc=<description> - A description for the location.

[network environment name] - The name of an existing network environment that you want to assign to the location. You can add multiple network environments. Adding network environments during creation of a location is optional. You can use the location-nwenv-assign command to add network environments after creation.

location-delete (ldel) (location name) [...]

Deletes locations.

(location name) - The name of the location you want to delete. You can specify one or more location names.

location-delete-all-network-assignments (ldana) (location name)

Removes all network environments from a location.

(location name) - The name of the location from which you want to remove all assigned network environments.

location-delete-network-assignments (ldna) (location name) [network environment name] [...]

Removes specific network environments from a location.

(location name) - The name of the location from which you want to remove network environments.

[network environment name] - The name of the network environment that you want to remove. You can remove multiple network environments.

location-list (ll) [options]

Lists locations.

Accepts the following options:

  • -c, --count - Displays the count of the results.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
location-list-network-assignments (llna) (location name)

Lists the network environments assigned to a location.

(location name) - The name of the location whose network environments you want to view.

Accepts the following options:

  • -c, --count - Displays the count of the results.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
location-list-relationships (llrel) (location name) [-c count]

Lists the ZENworks objects such as policies and bundles that are associated with the specified location.

(location name) - The name of the location whose ZENworks objects you want to view.

Accepts the following option:

  • -c, --count - Displays the count of the results.
location-network-assign (lna) (location name) (network environment name) [...]

Adds network environments to a location.

(location name) - The name of the location to which you want to assign network environments.

[network environment name] - The name of an existing network environment that you want to add to the location. You can add multiple network environments.

location-rename (lrn) (old name) (new name)

Renames a location.

(old name) - The name of the location that you want to rename.

(new name) - The new name for the location.

<location-response-recompute|lrr> [<Device Folder or Device Object Path> <Device Folder or Device Object Path>...<Device Folder or Device Object Path>] [-f|--forceRecompute]

Requests the server to recompute the location configuration response so that the requesting devices can obtain the latest changes.

[Device Folder or Device Object Path][...]: Specify the path of a device folder or device object.

-f, --forceRecompute: Force recompute all the location configuration responses.

location-throttle (lt) (location name) (throttle rate)

Sets the bandwidth throttle rate to be used for distributing content to devices identified with the specified location. To maximize performance of your ZENworks Servers and network system, high bandwidth environments can use one set of throttle rates and low bandwidth environments can use a different set of throttle rates. The throttle rate can be overridden in a bundle so that high-priority patch and bundle content can be deployed quickly.

(location name) - The name of the location for which you want to define the bandwidth throttle rate.

(throttle rate) - The maximum bandwidth rate in kilobits per second (kbps).

location-unknown-throttle (lut) (throttle rate)

Sets the bandwidth throttle rate to be used for distributing content to devices identified with the Unknown location.

(throttle rate) - The maximum bandwidth rate in kilobits per second (kbps).

Location Rules Commands

These commands are used to copy, export, and import Closest Server rules. Location commands begin with location- in the long form, or with the letter loc in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

The Location Rules commands are applicable only for the ZENworks Configuration Management 10.2.x/10.3.x zone. The commands are no longer valid after you baseline your zone to ZENworks 11 SP3. To configure locations in ZENworks, you must use the commands listed in the Location category.

location-copy-rules (loccp) [options] (source device or device folder path) (destination device or device folder path)

Imports Closest Server rules data (in XML format) from a file. If the devices or folders specified in the XML file no longer exist, they are skipped.

(source device or device folder path) - Path of the device or device folder starting with /Devices from which Closest Server rules are to be copied.

(destination device or device folder path) - Paths of one or more devices or device folders starting with /Devices to which Closest Server rules are to be applied. If the destination does not exist, or does not appear in the XML file, it will be skipped.

Accepts the following options:

  • -q, --quitOnError - Stop processing if an error occurs while saving any rule. The default is to note the error and continue with the next rule.
  • -o, --overwriteExisting - Overwrite existing rules on devices and folders that are specified in the XML file. The default is to skip destinations with existing rules.

Examples:

To copy the rules from /Devices/Workstations/Folder1 to /Devices/Workstations/Folder2 and /Devices/Workstations/MyComputer:

zman loccp /Devices/Workstations/Folder1 /Devices/Workstations/Folder2 /Devices/Workstations/MyComputer

To copy the rules from /Devices/Workstations/Folder1 to /Devices/Workstations/Folder2 overwriting existing values:

zman loccp -o /Devices/Workstations/Folder1 /Devices/Workstations/Folder2

location-export-rules-to-file (loctf) [options] (xml file path)

Exports Closest Server rules data (in XML format) to a file. The XML file can be used as input for creating or appending to the Closest Server rules.

(XML file path) - The file into which the rules data will be stored in XML format. The file is created if it does not exist.

Accepts the following option:

  • -s, --source - Path of the device or device folder starting with /Devices from which Closest Server rules are to be exported. If not specified, all Closest Server rules will be exported.

Examples:

To export the Closest Server rules for folder /Devices/Servers to C:\rules.xml:

zman loctf -s /Devices/Servers C:\rules.xml

To export all Closest Server rules to C:\rules.xml:

zman loctf C:\rules.xml

location-import-rules-from-file (locff) [options] (XML file path) [<destination device or device folder path> <destination device or device folder path> <destination device or device folder path>]

Imports Closest Server rules data (in XML format) from a file. If the devices or folders specified in the XML file no longer exist, they are skipped.

(XML file path) - XML file containing exported rules information. Use location-export-rules-to-file (loctf) to export settings information into an XML file.

[destination device or device folder path][...] - Paths of one or more devices or device folders starting with /Devices to which Closest Server rules are to be applied. If the destination does not exist, or does not appear in the XML file, it will be skipped.

Accepts the following options:

  • -q, --quitOnError - Stop processing if an error occurs while saving any rule. The default is to note the error and continue with the next rule.
  • -o, --overwriteExisting - Overwrite existing rules on devices and folders that are specified in the XML file. The default is to skip destinations with existing rules.

Examples:

To import Closest Server rules from C:\rules.xml:

zman locff C:\rules.xml

To import Closest Server rules from C:\rules.xml and quit on error:

zman locff -q C:\rules.xml

To import Closest Server rules from C:\rules.xml overwriting existing values:

zman locff -o C:\rules.xml

Message Commands

These commands are used to view and manage messages. Message commands begin with message- in the long form, or with the letter m in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

(messages-acknowledge|ma) [object path] [options]

Acknowledges messages associated with a ZENworks managed device, bundle, or policy.

[object path] - Full path of the object that has messages associated with it. The object can be a server, workstation, bundle, or policy.

Accepts the following options:

  • -b, --begin-date=[message logged date] - Messages logged on and after this date are acknowledged. The format for the date is YYYY-MM-DD.
  • -e, --end-date=[message logged date] - Messages logged on and before this date are acknowledged. The format for the date is YYYY-MM-DD.
  • -a, --all - Acknowledges all messages logged for the object. If an object is not specified, all the logged messages are acknowledged.
  • -l, --logID=[log id][...] - A comma-separated list of log IDs of the messages to be acknowledged. You can obtain the log IDs by using the messages-view command.
  • -L, --logID-file=[file path] - The path of the file containing message log IDs. Each line in the file should contain a message log ID. Use this option instead of the --log-ID option to input the log IDs.
(messages-delete|md) [object path] [options]

Deletes messages associated with a ZENworks managed device.

[object path] - Full path of the object that has messages associated with it. The object can be a server, workstation, bundle, or policy.

Accepts the following options:

  • -b, --begin-date=[message logged date] - Messages logged on and after this date are deleted. The format for the date is YYYY-MM-DD.
  • -e, --end-date=[message logged date] - Messages logged on and before this date are deleted. The format for the date is YYYY-MM-DD.
  • -l, --logID=[log ID][...] - A comma-separated list of log IDs of the messages to be deleted. You can obtain the log IDs by using the messages-view command.
  • -L, --logID-file=[file path] - The path of the file containing the message log IDs. Each line in the file should contain a message log ID. Use this option instead of the --log-ID option to input the log IDs.
messages-view (mv) [options] [object path]

Lists messages associated with a ZENworks managed device, bundle, or policy.

  • -S, --severity=[severity [ ...] - Filters on the message severity. Valid values are critical, warning, and info.
  • -t, --type=[message type] - Filters on the source of message. Valid values are server and client. Filtering on server lists messages generated by the ZENworks server and filtering on client lists messages generated by the ZENworks Adaptive Agent on that device.
  • -D, --date-condition=[date condition] - Filters messages based on a date range. Valid values are before, since, and between. Use the --begin-date and --end-date options to specify the dates. If date condition is used and no date is specified, the current date is taken by default.
  • -b, --begin-date=[message logged date] - The date on which the message was logged. The format for the date is YYYY-MM-DD. This option is to be used in conjunction with the date condition option. If date condition is not specified, messages logged before this date are displayed.
  • -e, --end-date=[message logged date] - The date on which the message was logged. The format for the date is YYYY-MM-DD. This option is to be specified when between is specified as the value for the date condition option.
  • -a, --acknowledged - Filters on acknowledged messages.
  • -n, --not-acknowledged - Filters on messages that are not acknowledged.
  • -m, --messagefilter=[localized message] - Filters on the localized message.
  • -c, --count - Displays only the count of the messages.
  • -o, --sort-order=[sort order] - Sorts the messages based on date, severity, and acknowledged.
  • -A, --asc - Specifies the direction of sorted listing. The default is descending order.
  • -d, --detailed - Returns more information about the messages.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.

Network Environment Commands

These commands are used to view and manage network environments. Network environments consist of services (gateways, DNS servers, DHCP servers, and so forth) that identify the environment.

Network environments are the building blocks for locations. When the ZENworks Adaptive Agent determines that its current environment matches a network environment assigned to a location, the agent enforces any security policies and closest server rules assigned to the location.

Network environment commands begin with network-environment- in the long form, or with the letters ne in the short form. All of the commands below accept the flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

network-environment-audit-upload (neau) (network environment name) (state)

Configures the audit data upload setting for a specified network environment.

(network environment name) - The name of the network environment.

(state) - Select the state:

  • 0 to revert to the audit data upload settings configured for the location associated with the device.

  • 1 to enable devices in the associated network environment to upload audit event data to any Satellite Server (Collection role) or Primary Server.

  • 2 to disable devices in the associated network environment, from uploading audit event data to any Satellite Server (Collection role) or Primary Server.

network-environment-create (nec) (network environment name) [-d|--desc=<description>] [network environment XML file]

Creates a network environment from the information contained in the specified XML file.

(network environment name) - The name you want assigned to the new network environment.

-d, --desc=<description> - A description for the network environment.

[network environment XML file] - The pathname of the XML file containing the information needed to create the network environment. If you don’t already have an XML file, use the network-environment-export-to-file command to export the information for an existing network environment. You can then use the XML file as a template for creating new network environment files.

network-environment-delete (ned) (network environment name) [...]

Deletes a network environment.

(network environment name) - The name of the network environment you want to delete. You can specify one or more names.

network-environment-export-to-file (neetf) (network environment name) (XML file path)

Exports a network environment’s information to an XML-formatted file.

The network-environment-create command requires network environment information to be input through an XML-formatted file. You can use this file as a template, modifying it as necessary to include the information you want used when creating a new network environment.

(network environment name] - The name of the network environment whose information you want to export to the file.

(XML file path) - The file path and name for the export file.

network-environment-list (nel) [options]

Lists network environments.

Accepts the following options:

  • -c, --count - Displays the count of the results.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
network-environment-list-relationships (nelr) (network environment name) [-cr count]

Lists the ZENworks objects such as policies and bundles that are associated with the specified network environment.

(network environment name) - The name of the network environment whose ZENworks objects you want to view.

Accepts the following option:

  • -c, --count - Displays the count of the results.
network-environment-rename (ner) (old name) (new name)

Renames a network environment.

(old name) - The name of the network environment that you want to rename.

(new name) - The new name for the network environment.

network-environment-throttle (net) (network environment name) (throttle rate)

Sets the bandwidth throttle rate for distributing content to devices located in a specific network environment. To maximize performance of your ZENworks Servers and network system, high bandwidth environments can use one set of throttle rates and low bandwidth environments can use a different set of throttle rates. The throttle rate can be overridden in a bundle so that high-priority patch and bundle content can be deployed quickly.

(network environment name) - The name of the network environment for which you want to define the bandwidth throttle rate.

(throttle rate) - The maximum bandwidth rate in kilobits per second (kbps).

Novell Customer Center Registration Command

This command is used to register the Primary Server to the Novell Customer Center.

The Novell Customer Center Registration command begins with ncc-register in the long form, or with nccreg in the short form. This command accepts the flags listed in the Global Options section. In addition, it accepts individual options as listed with the command.

(ncc-register|nccreg) (abc@xyz.com) (registration-key) [Primary Server path] [-i|--nccConfigXML=ncc-config.xml] [-r|--reRegister]

Registers the Primary Server to the Novell Customer Center.

(abc@xyz.com) - The Email address to register the Primary Server to the Novell Customer Center Server.

(registration-key) - The Registration key to register the Primary Server to the Novell Customer Center Server.

[Primary Server path] - The path of the Primary Server to register to the Novell Customer Center Server.

-i, --nccConfigXML= ncc-config.xml - The XML file that contains registration information such as the product, version, architecture, and release.

-r, --reRegister - Reregister the Primary Server to the Novell Customer Center Server.

Examples:

To register the Local Primary Server to the Novell Customer Center Server, run the following command:

zman nccreg email reg-key

To register a specific Primary Server to the Novell Customer Center Server, run the following command:

zman nccreg email reg-key server_path

To reregister the Local Primary Server to the Novell Customer Center Server, run the following command:

zman nccreg email reg-key -r

To reregister a specific Primary Server to the Novell Customer Center Server, run the following command:

zman nccreg email reg-key server_path -r

Object Commands

These are utility or convenience commands to operate on ZENworks objects. Object commands begin with object- in the long form, or with the letter o in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

object-get-GUID (ogg) (object path)

Gets the GUID of a ZENworks object.

(object path) - Full path of the ZENworks object, starting with a forward slash (/).

object-get-name (ogn) (ZENworks GUID)

Gets the name of a ZENworks object.

(ZENworks GUID) - The ZENworks GUID of the object, consisting of 32 characters.

object-get-path (ogp) (ZENworks GUID)

Gets the path of a ZENworks object, given the GUID.

(ZENworks GUID) - The ZENworks GUID of the object, consisting of 32 characters.

Primary Server Commands

These commands are used to manage content on the Primary Server. Primary Server commands begin with primary-server-.

primary-server-replicate-content (psrc) (bundle path | policy path)

Replicates the content for the specified bundle or policy on the Primary Server.

Examples:

To replicate the content of a bundle to the current server: zman psrc /Bundle/bundle1

To replicate the content of a policy to the current server: zman psrc /Policy/policy1

primary-server-cleanup-content (pscc) (bundle) (bundle path | policy path)

Cleans up the content for the specified bundle/policy on the Primary Server.

Examples:

To clean up the content of a bundle from the current server: zman pscc /Bundle/bundle1

To clean up the content of a policy from the current server: zman psrc /Policy/policy1

Policy Commands

These commands are used to create, modify and manage policies. Policy commands begin with policy- in the long form, or with the letter p in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

policy-assign (pa) (device or user type) (policy or policy group) (device or user object path) [...] [options]

Assigns a policy or policy group to one or more device or user objects.

(device or user type) - Valid values are device, server, workstation, and user.

(device or user object path) [...] - The path of the device or user objects relative to the root folder of the device or user type specified.

Accepts the following options:

  • -c, --conflicts=[policy conflict resolution order] - Determine how policy conflicts are resolved. Valid values are userlast or 1, devicelast or 2, deviceonly or 3, useronly or 4. For userlast, device-associated policies are applied first followed by user-associated policies. For devicelast, user-associated policies are applied first followed by device-associated policies. For deviceonly, user-associated policies are ignored. For useronly, device-associated policies are ignored. If this option is not specified, userlast is taken as the default value.
  • -e, --enforce-now - Enforces the policy immediately on all assigned devices.
  • -f, --folder=[device or user folder] - The path of the device or user folder relative to the respective root folder. If this option is specified, the path of the device or user objects is determined relative to this folder. This can be used to specify multiple device or user objects under the same folder.
policy-create (pc) (policy name) (policy XML file) [parent folder] [options]

Creates a policy.

(policy XML file) - XML file containing exported policy information. Use policy-export-to-file (petf) to export a policy's information into a XML file. If you want to reuse files, template XML files can be created from policies created through ZENworks Control Center.

Accepts the following options:

  • -d, --desc=[description] - Description for the policy.
  • -a, --actioninfo=[file content for policy] - XML file containing information about file content to be associated and packaged with the policy. For example, the driver file to be installed for a Printer policy is the file content. For the XML format template, refer to ActionInfo.xml located in /opt/novell/zenworks/share/zman/samples/policies on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\ samples\policies on a Windows server.
  • -s, --create-as-sandbox=[create as sandbox] - Creates the policy as a sandbox.
policy-copy (pcp) (policy path) (policy name) [parent folder] [options]

Copies a policy.

Accepts the following option:

  • -d, --desc=[description] - Description for the policy.
policy-delete (pd) (policy object path) [...] [options]

Deletes one or more policy objects.

(policy object path) [...] - The path of the policy objects (policy, policy folder or policy group) relative to /Policies. The wildcard * can be used in the object names if it is enclosed in quotations. Exercise caution while using wildcards for deleting objects.

Accepts the following options:

  • -r, --recursive - Deletes objects inside a folder recursively.
  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
policy-disable (pdl) (policy path) [...] [options]

Disables policies.

Accepts the following option:

  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
policy-delete-version (pdv) (policy path) [version of the policy to be deleted] [options]

Deletes one or more versions of the policy.

Examples:

To delete the version 3 of the policy, zenpolicy:

zman pdv zenpolicy 3

To delete all the versions of the policy, zenpolicy:

zman pdv zenpolicy -a

To delete all the versions of the policy, zenpolicy, that are older than the specified version:

zman pdv zenpolicy version -p

policy-enable (pel) (policy path) [...] [options]

Enables policies.

Accepts the following option:

  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
policy-export-to-file (petf) (policy path) (XML file path) [version of the policy] [-c|--export-content]

Exports a policy's information (in XML format) to a file. The XML file is to be used as input for creating policies.

(XML file path) - The complete path of the XML file to which the policy information is to be exported.

[Version of the policy] - Version of the policy to be exported. If the version is not specified, the published version of the policy is exported. To export a sandbox version of the policy, specify sandbox.

[-c|--export-content] - Exports the content of the policy to a subdirectory within the directory containing the XML file to which the policy’s information is exported. If the option is not specified, the policy content is not exported.

Examples:

To export the sandbox version of a policy named zenpolicy to an XML file named policy.xml:

zman petf policyfolder/zenpolicy C:\policies\policy.xml sandbox

To export version 3 of a policy named zenpolicy to an XML file named policy.xml:

zman petf policyfolder/zenpolicy C:\policies\policy.xml 3

To export version 5 of a policy named zenpolicy to an XML file named policy.xml and export the policy’s content to the C:\policies\policy_content directory:

zman petf policyfolder/zenpolicy C:\policies\policy.xml 5 -c

policy-folder-create (pfc) (folder name) [parent folder] [options]

Creates a new folder for containing policies.

Accepts the following option:

  • --desc=[description] - Description for the folder.
policy-group-add (pga) (policy group path) (policy path) [...] [options]

Adds policies to a policy group.

Accepts the following option:

  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
policy-group-create (pgc) (group name) [parent folder] [options]

Creates a policy group and adds members to it.

Accepts the following options:

  • --desc=[description] - Description for the group.
  • -m, --members=[policy path][...] - The path of the policies relative to /Policies.
  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
policy-group-members (pgm) (policy group path) [options]

Lists members of a policy group.

Accepts the following option:

  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
policy-group-remove (pgr) (policy group path) (policy path) [...] [options]

Removes policies from a policy group.

Accepts the following option:

  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
policy-list (pl) [options] [folder]

Lists policy objects.

Accepts the following options:

  • -r, --recursive - Lists results recursively including subfolders. If this option is not specified, the contents of the subfolders are not listed.
  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotation marks.
  • -c, --count - Displays the count of the results.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
policy-list-assignments (plas) (policy or policy group) [options]

Lists the device and user assignments for a policy.

Accepts the following options:

  • -t, --typefilter=[assignment type] - Filters on the assignment type. Valid values are device and user.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
policy-list-groups (plg) (policy path) [options]

Lists groups where the given policy is a member.

Accepts the following option:

  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
policy-list-version (plv) (policy path)

Lists all the versions of the policy.

Examples:

To list all the versions of the policy, zenpolicy:

zman plv zenpolicy

policy-move (pmv) (policy object path) [destination folder path]

Moves a policy object to a different folder.

policy-sandbox-create (psc) (policy path) [version of the policy] [options]

Create a sandbox from an existing version of a policy

[version of the policy] - Specify the version of the policy to be used for creating the sandbox.

Accepts the following option:

  • -f, --force =[force] - Overwrite any existing sandbox.

Example:

To create a sandbox from the version 2 of a policy, zenpolicy:

zman psc zenpolicy 2

policy-sandbox-publish (psp) (policy path)

Publish a sandbox to create a published version of the policy.

Example:

To publish the sandbox of a policy, zenpolicy

zman psp zenpolicy

policy-sandbox-publish-to-newpolicy (psptn) (policy path) (policy name) [parent folder] [options]

Publishes sandbox version of a policy to a new policy.

(policy path) - The path of the policy object relative to the policies root folder, /Policies.

(policy name) - Name of the new policy to be created.

[parent folder] - Folder in which the new policy is to be created. If not specified, the policy is created in the root folder.

Accepts the following options:

  • -s, --createAsSandbox =[create as sandbox] - Creates the policy as a sandbox.
  • -g, --groups - Adds the newly created policy to all the groups which the source policy is a member of.
  • -d, --deviceAssignments - Copies all the device assignments from the source policy to the new policy created.
  • -u, --userAssignments - Copies all the user assignments from the source policy to the new policy created.

Example:

To publish the sandbox version of a policy to a new policy.

zman psptn policy1 policy2 /Policies/Folder1

policy-sandbox-revert (psr) (policy path)

Deletes the sandbox and reverts to the latest published version of the policy.

Example:

To delete the sandbox and revert to the latest published version of the policy:

zman psr zenpolicy

policy-rename (pr) (policy object path) (new name) [options]

Renames a policy object.

  • -p, --publish =[publish] - If this option is specified and the display name of the bundle is edited, the bundle is immediately published. However, if the current display name of the bundle is different from the existing bundle name or if a sandbox already exists for the bundle, specifying this option will have no effect.
policy-unassign (pua) (device or user type) (policy or policy group) (device or user object path) [...] [options]

Unassigns a policy or policy group from one or more device or user objects.

(device or user type) - Valid values are device, server, workstation, and user.

(device or user object path) [...] - The path of the device or user objects relative to the root folder of the device or user type specified.

Accepts the following option:

  • -f, --folder=[device or user folder] - The path of the device or user folder relative to the respective root folder. If this option is specified, the path of the device or user objects is determined relative to this folder. This can be used to specify multiple device or user objects under the same folder.
policy-view-advanced-deployment-status (pvads) (policy path) [options]

Displays the advanced deployment status of a policy.

Accepts the following options:

  • -d, --device=[device path] - Displays the deployment status only for the specified device. The path of the device is relative to /Devices.
  • -u, --user=[user path] - Displays the deployment status for the specified user only. The path of the user is relative to /Users. If device is also specified, status details for the specified user logged into the specified device are displayed.
  • -n, --namefilter=[target device name] - Filters on the name of the device. Displays options matching the specified filter. The wildcard * and ? can be used if they are enclosed in quotation marks.
  • --statusfilter=[status type][...] - Filters on the status of Policy Apply Event. Valid values are S, F, and P (Success, Failure and Pending). A comma-separated list of status types can be given.
  • -t, --typefilter=[target device or user type][...] - Filters on the type of the target. Valid values are server, workstation, and user. A comma-separated list of target types can be given.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
policy-view-summary-totals (pvst) (policy path)

Displays a summary of the deployment status of a policy.

Policy Settings Commands

These commands are used to set and modify policy settings. Settings commands begin with settings- in the long form, or with the letter s in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

policy-settings-copy (pscp) (policy source path) (destination policy or policy folder path) [...] [options]

Copies settings.

(source policy or policy folder path) - The path of the policy or policy folder relative to /Policies from which settings have to be copied.

(destination policy or policy folder path) [...] - The path of the policies or policy folders relative to /Policies to which settings must be copied.

Accepts the following option:

  • -n, --names=[settings name][...] - Names of the settings to be copied from the source path. If this option is not specified, all settings defined at the source path are copied.
policy-settings-export-to-file (psetf) [options] (XML file path) [settings name] [...]

Exports settings data (in XML format) to a file. The XML file is to be used as input for creating or modifying settings.

(XML file path) - The file into which the settings data is stored in XML format. If the file does not exist, a new file is created.

[settings name] [...] - Names of the settings to be exported. If this option is not specified, all settings are exported.

Accepts the following options:

  • -s, --source=[source policy or policy folder path] - The path of the policy or policy folder relative to /Policies from which settings must be exported. If this option is not specified, settings are exported from the Zone.
  • -e, --effective - If specified, the effective settings are retrieved; otherwise, only the settings defined or overridden at the source path are retrieved.
policy-settings-revert (psrt) (policy source path) (settings name) [...]

Reverts the settings to that of the parent folder.

(source policy or policy folder path) - The path of the policy or policy folder relative to /Policies, whose settings must be reverted.

policy-settings-set (pss) [options] (XML file path) [destination policy or policy folder path] [...]

Sets settings at various levels.

(XML file path) - XML file containing exported settings information. Use settings-export-to-file (setf) to export settings information into a XML file.Accepts the following options:

[settings name] [...] - Names of the settings to be exported. If this option is not specified, all settings are exported.

  • -f, --force - Forces all children (subfolders and individual polices) to inherit these settings.
  • -s, --source=[source policy or policy folder path] - The path of the policy or policy folder relative to /Policies for which settings have to be set. If this option is not specified, settings are set at the Zone level.

Query Commands

These commands are used to list and run saved searches. Query commands begin with query- in the long form, or with the letter q in the short form.

query-list-savedsearches|qls [-d|--detailed]

Lists the saved searches.

Accepts the following option:

  • [-d, --detailed] - Lists the filter criteria for the saved search.
query-run-savedsearch|qrs (saved search) [folder path] [-r|--recursive] [-s|--scrollsize=scroll size]

Runs a saved search.

Accepts the following options:

  • (saved search) - Saved search to be executed.
  • [folder path] - The path of the device folder where the search is to be performed relative to /Devices. The default folder is /Devices.
  • [-r|--recursive] - This option has been deprecated in ZENworks 11 SP3. If you specify this option, it will be ignored. The recursive value is taken from the saved search.
  • [-s|--scrollsize=scroll size] - Number of results to be displayed at a time.

Queue Commands

These commands are used when you need to make modifications to the queue. The queue processes asynchronous events such as client refreshes and content cleanup, and does not need to be modified under most circumstances. Queue commands begin with queue- in the long form, or with the letter q in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

queue-flush (qf) (queue status)

Flushes the queue by removing the queue entries.

(queue status) [...] - Filters on the status of the queue entries. Valid values are N, I, C, S, and F (New, In Progress, Cancelled, Success, and Failed).

queue-list (ql) [server path] [options]

Lists queue entries.

[server path] - The path of a server relative to /Devices/Servers. Lists only the queue entries belonging to the specified server.

Accepts the following options:

  • -t, --type=[queue action type] - Filters on the type of the queue entry. For example, content.cleanup is a queue entry type.
  • -s, --status=[queue status] - Filters on the status of the queue entries. Valid values are N, I, C, S, and F (New, In Progress, Cancelled, Success, and Failed).
queue-reset (qr) [server path]

Resets the queue, and sets the status of failed queue entries to New.

[server path] - The path of a server relative to /Devices/Servers. Resets only the queue entries belonging to the specified server.

Registration Commands

These commands allow you to create and alter registrations. They require a device type to be specified. It determines the type of device folder and device group the registration key is associated with and therefore the type of the registering devices. Registration commands begin with registration- in the long form, or with the letter r in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

registration-add-device-groups (radg) (device type) (registration key) (device group path) [...] [options]

Adds membership in the specified device groups for devices registering with the given key.

(device type) - Type of the registering device. Valid values are server and workstation.

Accepts the following option:

  • -f, --folder=[device folder] - The path of the device folder relative to root folder of the device type specified. If this option is specified, path of the device objects is determined relative to this folder. This can be used to specify multiple device objects under the same folder.
registration-create-key (rck) (device type) (registration key) [registration folder path] [options]

Creates a new registration key.

(device type) - Type of the registering device. Valid values are server and workstation.

Accepts the following options:

  • -f, --devicefolder=[device folder] - The path of the device folder relative to the root folder of the device type specified. Registering devices are placed in this folder.
  • -g, --devicegroup=[device group path][...] - A comma-separated list of path of the device groups. The paths specified should be relative to the root folder of the device type specified. Registering devices become members of these device groups.
  • --desc=[description] - Description for the registration key.
  • --site=[site] - The site where the devices are located. Registering devices are populated with this site information.
  • --dept=[department] - The department in which the devices are used. Registering devices are populated with this department information.
  • --loc=[location] - The physical location of the devices. Registering devices are populated with this location information.
  • --limit=[limit] - Number of times this key can be used to register devices.
registration-copy (rcp) (registration key) (new name)

Copies a registration key.

(registration key) - Name of the registration key.

(new name) - Name for the copied registration key.

registration-delete (rd) (registration object path) [...] [options]

Deletes registration objects.

(registration object path) [...] - The path of the registration objects (registration key or folder) relative to /Keys. The wildcard * can be used in the object names if it is enclosed in quotations. Exercise caution while using wildcards for deleting objects.

Accepts the following options:

  • -r, --recursive - Deletes objects inside a folder recursively.
  • -f, --folder=[registration folder] - The path of a registration folder relative to /Keys. If this option is specified, the path of the registration objects is determined relative to this folder. This can be used to specify multiple registration objects under the same folder.
registration-folder-create (rfc) (folder name) [parent folder] [options]

Creates a new registration folder.

Accepts the following option:

  • --desc=[description] - Description for the folder.
registration-info (ri) (registratin key)

Displays detailed information about a registration key.

registration-list (rl) [options] [folder]

Lists all registration objects.

Accepts the following options:

  • -r, --recursive - Lists results recursively, including subfolders. If this option is not specified, the contents of the subfolders are not listed.
  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotation marks.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
registration-list-device-groups (rldg) (registration key)(rd)

Lists the device groups associated with a registration key.

registration-move (rmv) (registration object path) [destination folder path]

Moves a registration object to a different registration folder.

registration-remove-device-groups (rrdg) (device type) (registration key) (device group path) [...] [options]

Removes the association of device groups to a registration key.

(device type) - Type of the registering device. Valid values are server and workstation.

Accepts the following option:

  • -f, --folder=[device folder] - The path of the device folder relative to the root folder of the device type specified. If this option is specified, the path of the device objects is determined relative to this folder. This can be used to specify multiple device objects under the same folder.
registration-rename (rr) (registration object path) (new name)

Renames a registration object.

registration-update-key (ruk) (device type) (registration key) [options]

Updates a registration key.

Accepts the following options:

  • -f, --devicefolder=[device folder] - The path of the device folder relative to the root folder of the device type specified. Registering devices are placed in this folder.
  • --desc=[description] - Description for the registration key.
  • --site=[site] - The site where the devices are located. Registering devices are populated with this site information.
  • --dept=[department] - The department in which the devices are used. Registering devices are populated with this department information.
  • --loc=[location] - The physical location of the devices. Registering devices are populated with this location information.
  • --limit=[limit] - Number of times this key can be used to register devices.
  • --unlimited - The key can be used without limit to register devices.
registration-import-devices (rid) (CSV file path) (registration key)

Imports the devices from the CSV file, which is used to specify the device information.

(CSV file path) - The name of the CSV file with the path. Each entry in the file contains details for a workstation or a server.

For a workstation, or a server, the format of the file entry is version, host name, serial number, and macAddress.

For a workstation, or a server, the version is WS_1.0.

The values for version and host name are mandatory, and the values for serial number and macAddress are optional.

(registration key) - Name of the registration key.

NOTE:Ensure that the file is in UTF-8 format.

For example:

To register the devices in the CSV devicesInfo file by using the registration key regkey, run the zman rid c:\devicesInfo.csv regkey command.

Role Commands

These commands are used to create and manage roles for rights-based management of administrator accounts. Role commands begin with role- in the long form or the letters rl in the short form.

role-add-admins (rlaa) [role name] [ZENworks administrator name] [...] [rights category] [object path] [...] [options]

Assigns a role to one or more ZENworks administrators and associates the rights categories in a role to different object contexts.

[rights category] - Name of the category within which the rights are grouped. To see the list of categories, run zman role-rights-add-admins --Help | more.

[object path] [...] - Full path of the ZENworks object starting with a slash (/) on which the rights grouped in a rights category should be enforced. To view the root folders of the object types that can be associated with a rights category, run zman role-add-admins --Help | more.

Accepts the following options:

  • -f, --folder=[folder name] - Full path of a folder. If this option is specified, the path of the objects is determined relative to this folder. This provides convenience if you want to specify multiple objects under the same folder.
  • -H, --Help - Displays detailed help about the categories of rights available, and the root folders of the object types on which the rights can be enforced.
role-create (rlc) (role name)

Creates a ZENworks administrator role.

role-delete (rld) (role name) [...]

Renames a ZENworks administrator role.

(role name) [...] - Name of the roles. The wildcard * can be used in the object names if it is enclosed in quotation marks. Exercise caution when using wildcards to delete objects.

role-list (rll) [options]

Lists all ZENworks administrator roles.

Accepts the following options:

  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotation marks.
  • -N, --name-only - Displays the role name only.
  • -T, --name-and-type - Displays the role name and privilege types only.
  • -l, --longnames - Displays names of the rights. By default, the abbreviated form of the rights name is displayed.
role-list-admins (rlla) [role name]

Lists the ZENworks administrators with the specified role, and the contexts associated with the rights categories of that role.

role-remove-admins (rlra) (role name) (ZENworks administrator name) [...] [rights category] [object path] [...] [options]

Removes assignment of a role from one or more ZENworks administrators or removes the association of rights categories to object contexts.

[rights category] - Name of the category within which the rights are grouped. To see the list of categories, run zman role-rights-add-admins --Help | more.

[object path] [...] - Full path of the ZENworks object starting with / on which the rights grouped in a rights category should be enforced. To view the root folders of the object types that can be associated with a rights category, run zman role-add-admins --Help | more.

Accepts the following option:

  • -f, --folder=[folder name] - Full path of a folder. If this option is specified, the path of the objects is determined relative to this folder. This provides convenience if you want to specify multiple objects under the same folder.
role-rename (rlr) (role name) (new name)

Renames a ZENworks administrator role.

role-rights-delete (rlrd) (role name) [rights category]

Deletes rights assigned to a ZENworks administrator role.

[rights category] - Name of the category within which the rights are grouped. To see the list of categories, run zman role-rights-set --Help | more.

role-rights-info (rlri) (role name) [options]

Displays rights assigned to a ZENworks administrator role.

Accepts the following options:

  • -c, --category=[rights category] - Name of the category within which the rights are grouped. To see the list of categories, run zman role-rights-set --Help | more.
  • -l, --longnames - Displays names of the rights. By default, the abbreviated form of the rights name is displayed.
role-rights-set (rlrs) [role name] [rights category] [options]

Allows or denies rights for a ZENworks administrator role.

[rights category] - Name of the category within which the rights are grouped. To see the list of categories, run zman role-rights-set --Help | more.

Accepts the following options:

  • -a, --allow=[right][...] - A comma-separated list of long or short names of the rights to be allowed. To view the rights of each category, run zman role-rights-set --Help | more.
  • -A, --allow-all - Allows all rights of the rights category.
  • -d, --deny=[right][...] - A comma-separated list of long or short names of the rights to be denied. To view the rights of each category, run zman role-rights-set --Help | more.
  • -D, --deny-all - Denies all rights of the rights category.
  • -u, --unset=[right][...] - A comma-separated list of long or short names of the rights to be unset. To view the rights of each category, run zman role-rights-set --Help | more.
  • -H, --Help - Displays detailed help about the categories of rights available, and the long and short names of the rights within each category. If a category name is specified, help is provided on the rights for that category.

Ruleset Commands

These commands are used to create and modify registration rule sets. Rule sets are applied to new devices registering to the ZENworks server that do not present a registration key. The commands require a device type to be specified, then the command determines the type of device folder and device group the rule set is associated with, and therefore determines the type of the registering devices. Rule set commands begin with ruleset- in the long form, or with the letter rs in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

ruleset-add-device-groups (rsadg) (device type) (rule set name or position) (device group path) [...] [options]

Adds membership in the specified device groups for devices imported by using the specified rule set.

(device type) - Type of the registering device. Valid values are server and workstation.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

(device group path) - Specify the device group path relative to the root folder of the device type.

Accepts the following option:

  • -f, --folder=[device folder] - The path of the device folder relative to root folder of device type specified. If this option is specified, the path of the device objects is determined relative to this folder. This can be used to specify multiple device objects under the same folder.
ruleset-add-rule (rsar) (rule set name or position) (add mode) (rule group position) (rules file)

Adds rules or rule groups to a rule set.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

(add mode) - Specify the mode of addition, whether rules or rule groups are being added. Valid values are rule and rulegroup. If mode is rule, all rules across rule groups in the input file will be picked and added.

(rules group position) - Specify the position of the rule group. If you are adding rule groups, this refers to the position the new groups must be inserted at. If you are adding rules, it refers to the position in the rule group where the new rule needs to be added. To point to the last rule group, specify last. To add rules in a new rule group or to add rule groups at the end of the list, specify makenew. The first rule group is at position 1.

(rules file) - The path of the XML file containing the information of rules or rule groups to be added to the rule set. The XML file can be created by exporting rules of an existing rule set using ruleset-export-rules-to-file command. The conjunction specified in the XML file is immaterial. Alternately, to add only rules, the older format can still be used.

For the file format, refer to AddRulesToRuleSet.txt located in /opt/novell/zenworks/share/zman/samples/rulesets on a Linux Server or <Installation directory>:\Novell\Zenworks\share\zman\samples\rulesets on a Windows Server.

For example:

To add rule groups at position 4 in a rule set:

zman rsar ruleset2 rulegroup 4 C:\RuleGroups.xml

To add rules to the third rule group of a rule set:

zman rsar ruleset2 rule 3 C:\Rules.xml

To add rules to the last rule group of a rule set:

zman rsar ruleset2 rule last C:\Rules.xml

To add rules as a new rule group in a rule set:

zman rsar ruleset2 rule makenew C:\Rules.xml

ruleset-create (rsc) (device type) (rule set name) (rules file) [position] [options]

Creates a new rule set to apply when registering a device without a registration key.

(device type) - Type of the registering device. Valid values are server and workstation.

(rule set name) - Specify the name of the rule set.

(rules file) - The path of the XML file containing the information of rules or rule groups for the new rule set. The XML file can be created by exporting rules of an existing rule set by using the ruleset-export-rules-to-file command. Alternately, to add only rules (conjunction being AND), the older format can still be used.

For a sample of the file format, see the AddRulesToRuleSet.txt file located in /opt/novell/zenworks/share/zman/samples/rulesets on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ rulesets on a Windows server.

(position) - Position of the rule set among the rule sets. The first rule set is at position 1.

Accepts the following options:

  • -f, --devicefolder=[device folder] - The path of the device folder relative to the root folder of the device type specified. Registering devices are placed in this folder.
  • -g, --devicegroup=[device group path][...] - A comma-separated list of paths of the device groups. The paths specified should be relative to the root folder of the device type specified. A registered device becomes a member of these device groups.
  • --desc=[description] - Description for the rule set.
  • --site=[site] - The site where the devices are located. Registering devices are populated with this site information.
  • --dept=[department] - The department in which the devices are used. Registering devices are populated with this department information.
  • --loc=[location] - The physical location of the devices. Registering devices are populated with this location information.

For example:

To create a rule set for registering servers:

zman rsc server ruleset1 C:\RuleSet1.xml --devicefolder serverfolder --desc "rule to import servers" --site "Building A" --dept Finance --loc Brazil

Any registering device that evaluates to true for the rules defined in this rule set is placed in the /Devices/Servers/serverfolder folder with the given site, department, and location values.

To create a rule set for registering workstations that might become members of some workstation groups:

zman rsc workstation ruleset3 --devicegroup wsgroup,wsgroup1,wsfolder/wsgroup2

The association of device groups to a rule set can also be done after the rule set creation by using the ruleset-add-device-group command.

ruleset-copy (rscp) (rule set name or position) (new name) [position]

Copies a ruleset.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

(new name) - New name to be given to the copied ruleset.

(position) - Position of the rule set among the rule sets. The first rule set is at position 1.

For example:

To copy a rule set to the first position:

zman rscp ruleset3 newruleset 1 Note: If the new position specified is 0 or greater than the number of rule sets, the rule set is copied to the beginning or the end of the list, respectively.

ruleset-export-rules-to-file (rsertf) (rule set name or position) (XML file path)

Exports the rules of a rule set to a file.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

(XML file path) - Specify the file in which the rules will be stored in XML format.

For example:

To export rules from a rule set:

zman rsertf ruleset1 C:\ExportedRuleSet.xml

ruleset-delete (rsd) (rule set name or position)

Deletes a rule set.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

ruleset-info (rsi) (rule set name or position)

Displays detailed information about a rule set.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

For example:

To display details about the ruleset MyRegRule:

zman rsi MyRegRule

ruleset-list (rsl)

Lists all rule sets.

ruleset-list-device-groups (rsldg) (rule set name or position)

Lists the device groups associated with a rule set.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

ruleset-move (rsmv) (rule set name or position) (new position)

Changes the position of a rule set.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

(new position) - Specify the new position to which the rule set needs to be moved.

For example:

zman rsmv ruleset3 1

Note: If the new position specified is 0 or greater than the number of rule sets, the rule set is moved to the beginning or the end of the list, respectively.

ruleset-remove-device-groups (rsrdg) (device type) (rule set name or position) (device group path) [...] [options]

Removes the association of device groups to a rule set.

(device type) - Type of the registering device. Valid values are server and workstation.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

(device group path) - Path of the device groups relative to the root folder of the device type specified.

Accepts the following option:

  • -f, --folder=[device folder] - The path of the device folder relative to root folder of the device type specified. If this option is specified, the path of the device objects is determined relative to this folder. This can be used to specify multiple device objects under the same folder.
ruleset-remove-rule (rsrr) (rule set name or position) (rule positions) [...]

Removes rules or rule groups from a rule set.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

(rule positions) - Specify the positions of the rules to be removed. The first rule group is denoted as G1 and the first two rules in G1 are denoted as G1:1,2. The position can be either a group or specific rules within a group.

For example:

To remove the second rule group of a rule set:

zman rsrr ruleset2 G2

To remove specific rule groups and specific rules from different rule groups:

zman rsrr ruleset2 G1:3 G2:2,5,6 G3 G6:4,9 G8

ruleset-rename (rsr) (rule set name or position) (new name)

Renames a rule set.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

(new name) - Specify the new name to be given to the rule set.

ruleset-update (rsu) (device type) (rule set name or position) [options]

Updates a rule set.

(device type) - Type of the registering device. Valid values are server and workstation.

(rule set name or position) - Specify the name of the rule set or its position within the rule sets. The first rule set is at position 1.

Accepts the following options:

  • -f, --devicefolder=[device folder] - The path of the device folder relative to the root folder of the device type specified. Registering devices are placed in this folder.
  • --desc=[description] - Description for the rule set.
  • --site=[site] - The site where the devices are located. Registering devices are populated with this site information.
  • --dept=[department] - The department in which the devices are used. Registering devices are populated with this department information.
  • --loc=[location] - The physical location of the devices. Registering devices are populated with this location information.

For example:

To update a rule set that registers servers:

zman rsu server ruleset1 --devicefolder serverfolder1 --desc "rule to import servers" --site "Building B" --dept Transport --loc Brazil

To modify server groups in which the imported server should become a member use, ruleset-add-device-group and ruleset-remove-device-group commands.

To update the device folder from a workstation folder to a server root folder:

zman rsu server ruleset2

This command changes the folder to which the registering device needs to be placed; from /Devices/Workstations to /Devices/Servers.

Satellite Commands

These commands are used to view, create, and remove Satellites. Satellite commands begin with satellite-server- .

satellite-server-add-content-replication-setting (ssacrs) (path to device) (content type) [-s|--scheduleFileName=file path] [-t|--throttleRate=Throttle Rate] [-d|--duration=Duration] [--noSchedule]

Add a content type replication schedule and throttle setting to the Satellite device.

  • (Path To Device) - The full name of the satellite device to which to add the replication setting.
  • (Content Type) - The name of the content type for the replication setting to add to the satellite device.
  • -s, --scheduleFileName=<file path> - The full path to a file with the schedule data for the replication setting saved in XML format.
  • -t, --throttleRate=<throttle rate> - The throttle rate in kbps for the replication setting to add to the satellite device.
  • -d, --duration=<duration> - The content replication duration period (in minutes).
  • --noSchedule - Use this option if you do not want to specify a schedule for content replication.
satellite-server-add-imagingrole|ssaimg) (Path To Device) [Parent Primary Server] [-p|--proxydhcp=ProxyDHCP Service] [-s|--serverPort=Satellite Server Port] (-r|--Content-Replication-Schedule=Satellite Server Content Replication Schedule) [--force-port-change] [--force-parent-change]

Promotes a managed device to a Satellite Server with the Imaging server role. If the managed device is already functioning as a Satellite Server, this command adds the Imaging server role.

Accepts the following options:

  • (Path to Device) - The path of the managed device relative to /Devices or the absolute path of the managed device.
  • [Parent Primary Server] - The path of the Primary Server relative to /Devices or the absolute path of the Primary Server that would act as the parent server to the new Satellite Server.
  • -p, --proxydhcp=<ProxyDHCP Service> - Starts or stops the Proxy DHCP service. The valid values are start and stop.
  • -s, --serverPort=<Satellite Server Port> - The port which the satellite server should use to listen for managed device requests. If not specified, port 80 will be used.
  • -r, --Content-Replication-Schedule=<Satellite Server Content Replication Schedule> - The XML file containing the Content Replication Schedule. In the Content Replication Schedule, enter the number of days, hours and minutes for how often the Satellite Server content should be updated from the parent Primary Server. For the XML format template, refer to ContentReplicationSchedule.xml located in /opt/novell/zenworks/share/zman/samples/schedules on a Linux server or <Installation directory>:\Novell\Zenworks\share\zman\samples\schedules on a Windows server.
  • --force-port-change - If the managed device is already functioning as a satellite server this option allows you to change the port that all satellite server components on this device will listen on for managed device requests.
  • --force-parent-change - If the managed device is already functioning as a satellite server this option allows you to change the Primary Server parent for all satellite server components on the device.

NOTE:Before promoting a managed device as Satellite, ensure that the ZENworks version installed on the managed device is same as that of the Primary Server. Additionally, you cannot promote the following devices as a Satellite:

  • A managed device that has a previous version of ZENworks Adaptive Agent installed.

  • A ZENworks test device.

satellite-server-create (ssc) (path to device) ((role),(role),...(role)) [parent primary server] [satellite server port] [satellite server secure HTTPS port] [--force-port-change] [--force-parent-change]

Allows you to configure a Satellite role.

Accepts the following options:

  • (path to device) - The full name of the managed device to create as a Satellite.
  • (role) - The Satellite roles to add to the managed device. Roles include Authentication, Collection, and Content and JoinProxy. If you want to assign the Imaging Satellite role or to promote a managed device to a Satellite with the Imaging server role, you must use the zman ssaimg command instead of this command. If you want to reconfigure JoinProxy role settings, you must use the zman ssujs command.
  • [Parent Primary Server] - The full name of the Primary Server to which the Satellite rolls up its collection data or from which it obtains its content. This field is optional if the managed device is already a Satellite.
  • [Satellite Server Port] - The port that the Satellite should use to listen for collection roll-up requests or for obtaining content from the parent Primary Server. If it is not specified, port 80 is used.
  • [Satellite Server Secure HTTPS Port] - The port that the Satellite should use to listen for authentication secure HTTPS requests. If not specified, port 443 is used.
  • [--force-port-change] - If the managed device is already functioning as a Satellite, this option allows you to change the port that all Satellite components on this device listen to for requests or for obtaining content.
  • [--force-parent-change] - If the managed device is already functioning as a Satellite, this option allows you to change the Primary Server parent for all Satellite components on the device.

NOTE:Before promoting a managed device as Satellite, ensure that the ZENworks version installed on the managed device is same as that of the Primary Server. Additionally, you cannot promote the following devices as a Satellite:

  • A managed device that has a previous version of ZENworks Adaptive Agent installed.

  • A ZENworks test device.

A non-root user can successfully execute this command (zman ssc) on a Linux Primary Server only if the user has been added to the ZENworks user group. To add the non-root user to the ZENworks user group, use the usermod -A non-root_username command.

satellite-server-update-joinproxy-settings (ssujs) (Path To Device) [-j|--jpport=jpport] [-m|--maxconnections=maxConnections] [-c|--connectionCheckInterval=connectionCheckInterval]

Updates the JoinProxy settings on a Satellite Server. You can promote only a Windows or a Linux managed device to the JoinProxy Satellite role. The Primary Servers have the JoinProxy role by default.

Accepts the following options:

  • (Path to Device) - The full name of the Satellite Server for which to update the JoinProxy settings.
  • -j, --jpport=<jpport> - The Port on which the JoinProxy will listen for connection.
  • -m, --maxconnections=<maxConnections> - Maximum number of devices allowed for connecting to JoinProxy.
  • -c, --connectionCheckInterval=<connectionCheckInterval> - The time interval for the Join Proxy to periodically check if the devices are still connected to it or not.

NOTE:If you do not use the ssujs command, the JoinProxy Satellite Server will be configured with the following default values:

  • Port: 7019

  • max Connections: 100

  • connection Check Interval: 1 min

satellite-server-delete (ssd) (Path to Device) [(role),(role),...(role)][-f|--force]

Allows you to delete Satellite roles from the device. If all roles are removed, the device will be automatically delisted from the Server Hierarchy listing in ZENworks Control Center.

If your Management Zone consists of ZENworks Primary Server and ZENworks Configuration Management Satellites, you cannot remove individual roles from the Satellites. You can only demote the Satellite to a managed device. You can delete a Satellite that has any version of the ZENworks Adaptive Agent installed.

Accepts the following options:

  • (Path to Device) - The full name of the Satellite Server from which to delete the Satellite roles.
  • [role] - The Satellite roles to delete from the device. If no roles are specified, all Satellite roles are deleted from the device. You can delete the following roles: Authentication, Collection, Content and Join Proxy.To remove the Imaging role, use the satellite-server-remove-imagingrole (ssrimg) command instead of this command.

[-f|--force] - Forces the demotion of a Satellite Server to a managed device while removing all of the specified, existing roles. Use this option only when a Satellite Server is permanently offline and cannot communicate with the ZENworks server.

satellite-server-configure-authentication-user-source (sscaus) (path to device) (user source) [user connection, user connection,...,user connection]

Configures the user source connections used by a Satellite with the Authentication role. Execute this command multiple times to configure connections for multiple user sources on the same Satellite, specifying a different user source each time. Execute this command with no connections to remove the specified user source from the authentication role of the Satellite.

Accepts the following options:

  • (Path To Device) - The full name of the Satellite for which to configure the authentication role user source.
  • (User Source) - The name of the user source to configure.
  • [User Connection] - User connections listed in order that this Satellite uses to authenticate users against the given user source.
satellite-server-edit-imagingrole (sseimg) (path to device) (action on proxydhcp service)

Starts or stops the Proxy DHCP service of the Imaging Satellite.

  • (Path to Device) - The path of the device relative to /Devices/Workstations. The device specified must be a Satellite with the Imaging role.
  • (Action on ProxyDHCP Service) - Starts or stops the Proxy DHCP service. The valid values are start and stop.
satellite-server-export-content (ssec) (path to device) (export directory) [options]

Exports content files from the content repository for manual import into the Satellite device’s content repository. To import the content into the content repository on a managed device, use the zac cdp-import-content (cic) command.

  • (Path To Device) - The full name of the Satellite device for which to export the content files.
  • (Export Directory) - The full path to a directory to which to export the content files.

Accepts the following options:

  • -a, --exportAll - Exports all content assigned to the Satellite device (by default, only missing content is exported).
satellite-server-export-content-replication-setting-schedule (ssecrss) (path to device) (content type) (-s | --scheduleFileName = file path)

Export the content type replication schedule from the Satellite device to a file.

  • (Path To Device) - The full name of the satellite device from which to export the replication setting schedule.
  • (Content Type) - The name of the content type for the replication setting to export from the satellite device.
  • -s, --scheduleFileName =<file path> - The full path to a file to which to export the schedule data.
satellite-server-list-authentication-settings (sslas) (path to device)

Lists the authentication role settings on a Satellite device.

  • (path to device) - The full name of the satellite device from which to list the authentication role settings.
satellite-server-list-imagingservers (sslimg)

Lists the Satellites with the Imaging role.

satellite-server-list-content-replication-settings (sslcrs) (path to device)

Lists the content replication schedule and throttle settings on the Satellite by content type.

  • (path to device) - The full name of the satellite device from which to list the replication settings.
satellite-server-list-roles (sslr) [managed device]

Lists previously defined Satellite roles.

Accepts the following option:

  • [Managed device] - The full name of the managed device for which to list Satellite roles. If not specified, all available Satellite roles are displayed.
Satellite-server-list-servers (ssls)

Lists the Satellites and their roles.

satellite-server-remove-content-replication-setting (ssrcrs) (path to device) (content type)

Remove a content type replication schedule and throttle setting from the Satellite device.

  • (Path To Device) - The full name of the satellite device from which to remove the replication setting.
  • (Content Type) - The name of the content type for the replication setting to remove from the satellite device.
satellite-server-remove-imagingrole (ssrimg) (path to device) [-r|--removeImageFiles]

Removes the Satellite Imaging server role from the managed device.

If your Management Zone consists of ZENworks Primary Server and ZENworks Configuration Management Satellites, you cannot remove individual roles from the Satellites. You can only demote the Satellite to a managed device. You can delete a Satellite that has any version of the ZENworks Adaptive Agent installed.

  • (Path to Device) - The path of the managed device relative to /Devices/Workstations. The device specified must be a Satellite with the Imaging role.
  • -r, --removeImageFiles - Deletes the image files from the specified device.
satellite-server-update-content-replication-setting (ssucrs) (path to device) (content type) (-s| --scheduleFileName=file path) [options]

Updates a content type replication schedule and throttle setting to the Satellite device.

  • (Path To Device) - The full name of the satellite device to which to update the replication setting.
  • (Content Type) - The name of the content type for the replication setting to update to the satellite device.
  • -s, --scheduleFileName=(file path) - The full path to a file with the schedule data for the replication setting saved in XML format.

Accepts the following option:

  • -d, --duration=<duration> - The content replication duration period (in minutes).
  • -t, --throttleRate=<Throttle Rate> - The throttle rate in kbps for the replication setting to update to the satellite device.

Server Commands

These commands are used to manage servers. Server commands begin with the word server- in the long form, or with the letter s in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

server-add-bundle (sab) (server object path) (bundle or bundle group) [...] [options]

Assigns bundles to a server object.

Accepts the following options:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
  • -I, --icon-location=[application location XML file] - XML file that contains the locations to place the icon for the bundle application. For the XML file format, refer to IconLocation.xml located in /opt/novell/zenworks/share/zman/samples/bundles on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ bundles on a Windows server.
  • -d, --distribution-schedule=[distribution schedule XML file] - The XML file that contains the distribution schedule.
  • -l, --launch-schedule=[launch schedule XML file] - The XML file that contains the launch schedule.
  • -a, --availability-schedule=[availability schedule XML file] - The XML file that contains the availability schedule. For the schedule XML file templates, refer to the XML files located in /opt/novell/zenworks/share/zman/samples/schedules on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ schedules on a Windows server.
  • -D, --dry-run - Tests and displays the requested actions but does not actually perform them.
  • -i, --install-immediately - Installs the bundle immediately after distribution. To use this option, you must also specify the Distribution schedule. The Distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -L, --launch-immediately - Launches the bundle immediately after installation. To use this option, you must also specify the Distribution schedule. The Distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -n, --distribute-now - Sets the distribution schedule to distribute the bundle immediately. If this option is specified, the --distribution-schedule and --distribute-on-device-refresh options are ignored. The --distribute-now, --distribute-on-device-refresh, and --distribution-schedule options are mutually exclusive and are used to set the distribution schedule. The --distribute-now option is considered first, followed by --distribute-on-device-refresh and --distribution-schedule.
  • -r, --distribute-on-device-refresh - Sets the distribution schedule to distribute the bundle on device refresh. If this option is specified, the --distribution-schedule option is ignored.
  • -s, --launch-on-device-refresh - Sets the launch schedule to launch the bundle on device refresh. If this option is specified, the --launch-schedule option is ignored.
  • -w, --wakeup-device-on-distribution - Wakes up the device by using Wake-On-LAN if it is shut down while distributing the bundle. To use this option, you must also specify the distribution schedule. The distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -B, --broadcast=[Broadcast address][...] - A comma-separated list of addresses used to broadcast the Wake-On-LAN magic packets. This option is used only if you choose to wake up the device by using Wake-On-LAN. A valid IP address is a valid value.
  • -S, --server=[The path of the Primary or Proxy Server objects relative to /Devices][...] - A comma-separated list of Primary or Proxy Server objects used to wake up the device. This option is used only if you choose to wake up the device by using Wake-On-LAN.
  • -C, --retries=[Number of retries] - Number of times the Wake-On-LAN magic packets are sent to the device(s). This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 0 and 5. The default value is 1.
  • -T, --timeout=[Time interval between retries] - The time interval between two retries. This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 2 and 10 (in minutes). The default value is 2.
server-add-certificate (sacert) (server object path) (certificate file path)

Adds a second valid certificate for a server in preparation for replacing a certificate that is about to expire

(server object path) - The path of the server objects (server, server folder or server group) relative to /Devices/Servers.

(certificate file path)- Path of the DER format certificate file.

server-add-policy (sap) (server object path) (policy or policy group) [...] [options]

Assigns policies to a server object.

Accepts the following options:

  • -c, --conflicts=[policy conflict resolution order] - Determines how policy conflicts are resolved. Valid values are userlast or 1, devicelast or 2, deviceonly or 3, useronly or 4. For userlast, device-associated policies are applied first, followed by user-associated policies. For devicelast, user-associated policies are applied first, followed by device-associated policies. For deviceonly, user-associated policies are ignored. For useronly, device-associated policies are ignored. If this option is not specified, userlast is taken as the default value.
  • -e, --enforce-now - Enforces the policy immediately on all assigned devices.
  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
server-delete (sd) (server object path) [...] [options]

Deletes one or more server objects.

(server object path) [...] - The path of the server objects (server, server folder or server group) relative to /Devices/Servers. The wildcard * can be used in the object names if it is enclosed in quotation marks. Exercise caution while using wildcards for deleting objects.

Accepts the following options:

  • -r, --recursive - Deletes objects inside a folder recursively.
  • -f, --folder=[server folder] - The path of a server folder relative to /Devices/Servers. If this option is specified, the path of the server objects is determined relative to this folder. This can be used to specify multiple server objects under the same folder.
server-folder-create (sfc) [folder name] [parent folder] [options]

Creates a new folder for containing servers.

Accepts the following option:

  • --desc=[description] - Description for the folder.
server-group-add (sga) (server group path) [server path] [...] [options]

Adds servers to a server group.

Accepts the following option:

  • -f, --folder=[server folder] - The path of a server folder relative to /Devices/Servers. If this option is specified, the path of the server objects is determined relative to this folder. This can be used to specify multiple server objects under the same folder.
server-group-create (sgc) [group name] [parent folder] [options]

Creates a server group and adds members to it.

Accepts the following options:

  • --desc=[description] - Description for the group.
  • -m, --members=[server path][...] - The path of the servers relative to /Devices/Servers.
  • -f, --folder=[server folder] - The path of a server folder relative to /Devices/Servers. If this option is specified, the path of the server objects is determined relative to this folder. This can be used to specify multiple server objects under the same folder.
server-group-members (sgm) (server group path) [options]

Lists members of a server group or a dynamic server group.

Accepts the following option:

  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
server-group-remove (sgr) (server group path) [server path] [...] [options]

Removes servers from a server group.

Accepts the following option:

  • -f, --folder=[server folder] - The path of a server folder relative to /Devices/Servers. If this option is specified, the path of the server objects is determined relative to this folder. This can be used to specify multiple server objects under the same folder.
server-info (si) (server path)

Lists detailed information about a server.

server-list (sl) [options] [folder]

Lists server objects.

Accepts the following options:

  • -r, --recursive - Lists results recursively including subfolders. If this option is not specified, the contents of the subfolders are not listed.
  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotation marks.
  • -t, --typefilter=[type filter][...] - Displays results matching the comma-separated list of object types specified. Valid values are device, group, and folder.
  • -c, --count - Displays the count of the results.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
  • -f, --flagfilter=[flag filter][...] - Displays results matching the comma-separated list of flags specified. Valid values are retired, notretired, test, and non-test.
server-list-bundles (slb) (server object path) [options]

Lists bundles assigned to a server object.

Accepts the following options:

  • -a, --all - Lists both effective and non-effective bundles.
  • -e, --effective - Lists only effective bundles.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
server-list-groups (slg) (server path) [options]

Lists groups of which the given server is a member.

Accepts the following option:

  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
server-list-policies (slp) (server object path) [options]

Lists policies assigned to a server object.

Accepts the following options:

  • -a, --all - Lists both effective and non-effective policies.
  • -e, --effective - Lists only effective policies.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
server-move (smv) (server object path) [destination folder path]

Moves a server object to a different folder.

server-refresh (srf) (server object path) [...] [options]

Refreshes the ZENworks Adaptive Agent in the servers.

Accepts the following option:

-f, --folder=[server folder] - The path of a server folder relative to /Devices/Servers. If this option is specified, the path of the server objects is determined relative to this folder. This can be used to specify multiple server objects under the same folder.

--server=<server/server folder/server group object path>[...] - The path of Primary Server objects (server, server folder or server group) relative to /Devices/Servers to send Quick Task notifications.

--notify=<minutes> - Time in minutes to notify all devices.

--expire=<minutes> - Time in minutes for expiry after creation of the quick task. Specify 0 to expire immediately.

--currentserver - Add quick task to the current Primary Server.

--anyserver - Add quick task in any of the Primary Servers.

--expirenever - The quick task never expires in the Primary Server.

server-remove-bundle (srb) (server object path) (bundle or bundle group) [...] [options]

Removes bundles assigned to a server object.

Accepts the following option:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
server-remove-policy (srp) (server object path) (policy or policy group) [...] [options]

Removes policies assigned to a server object.

Accepts the following option:

  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This helps you to specify multiple policy objects under the same folder.
server-rename (sr) (server object path) (new name)

Renames a server object.

server-reorder-bundles (srob) (server object path) (current position) (new position)

Changes the order of bundles assigned to a server. Use the server-list-bundles command to get the order of assigned bundles.

server-reorder-policies (srop) (server object path) (current position) (new position)

Changes the order of policies assigned to a server. Use the server-list-policies command to get the order of assigned policies.

server-retire (sret) (server object path)

Retires the selected server from your ZENworks system at its next refresh. Retiring a device is different from deleting a device. When you retire a device, its GUID is retained (as opposed to when you delete a device, which also deletes its GUID). As a result, all inventory information is retained and is accessible, but all policy and bundle assignments are removed. If you reactivate the device in the future, its assignments are restored.

Accepts the following option:

  • -i, --immediate - Forces a device refresh to immediately retire the device.
server-set-as-test (ssat) (server object path)

Sets a server as a test device.

Examples

To set server1 as a test device:

zman ssat server1

server-set-as-nontest (ssan) (server object path)

Sets a server as a non-test device.

Examples

To set server1 as a non-test device:

zman ssan server1

server-statistics (sst) (server path)

Displays statistics of ZENworks server usage.

server-unretire (suret) (server object path)

Reactivates the selected server at its next refresh and reapplies all policy and bundle assignments that the device previously had.

Accepts the following option:

  • -i, --immediate - Forces a device refresh to immediately unretire the device.
server-view-all-bundles-status (svabs) (server path) [options]

Displays the advanced deployment status of bundles assigned to a server.

Accepts the following options:

Accepts the following options:

  • --statusfilter=[status type][...] - Filter on the status of Bundle Distribution and Install Events. Valid values are S, R, C, A, F, and P (Success, Partial Success, Completed, Partial Complete, Failure, and Pending). A comma-separated list of status types can be given.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.

Examples

To view the deployment status of bundles assigned to server1:

zman svabs server1

To view the deployment status of bundles assigned to server1 having bundle deployment status as success or pending:

zman svabs server1 --statusfilter S,P

server-view-all-policies-status (svaps) (server path) [options]

Displays the advanced deployment status of policies assigned to a server.

Accepts the following options:

  • --statusfilter=[status type][...] - Filters on the status of Policy Apply Event. Valid values are S, F, and P (Success, Failure, and Pending). A comma-separated list of status types can be given.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
server-wakeup (sw) (server object path) [...] [options]

Wakes up a server using Wake-On-LAN.

Accepts the following options:

  • -f, --folder=[server folder] - The path of a server folder relative to /Devices/Servers. If this option is specified, the path of the server objects is determined relative to this folder. This can be used to specify multiple server objects under the same folder.
  • -b, --broadcast=[Broadcast address][...] - A comma-separated list of addresses used to broadcast the Wake-On-LAN magic packets. This option is used only if you choose to wake up the device by using Wake-On-LAN. A valid IP address is a valid value.
  • -s, --server=[Path of the Primary or Proxy Server objects relative to /Devices][...] - A comma-separated list of Primary or Proxy Server objects used to wake up the device. This option is used only if you choose to wake up the device by using Wake-On-LAN.
  • -C, --retries=[Number of retries] - Number of times the Wake-On-LAN magic packets are sent to the devices. This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 0 and 5. The default value is 1.
  • -t, --timeout=[Time interval between retries] - The time interval between two retries. This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 2 and 10 (in minutes). The default value is 2.

Settings Commands

These commands are used to set and modify settings. Settings commands begin with settings- in the long form, or with the letter s in the short form.

The Settings commands do not apply to ZENworks Endpoint Security Management settings (Zone Policy settings and Date Encryption Key settings).

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

settings-copy (scp) (source device or device folder path) (destination device or device folder path) [...] [options]

Copies settings.

(source device or device folder path) - The path of the device or device folder relative to /Devices from which settings have to be copied.

(destination device or device folder path) [...] - The path of the devices or device folders relative to /Devices to which settings must be copied.

Accepts the following option:

  • -n, --names=[settings name][...] - Names of the settings to be copied from the source path. If this option is not specified, all settings defined at the source path are copied.
settings-export-to-file (setf) [options] (XML file path) [settings name] [...]

Exports settings data (in XML format) to a file. The XML file is to be used as input for creating or modifying settings.

(XML file path) - The file into which the settings data is stored in XML format. If the file does not exist, a new file is created.

[settings name] [...] - Names of the settings to be exported. If this option is not specified, all settings are exported.

Accepts the following options:

  • -s, --source=[source device or device folder path] - The path of the device or device folder relative to /Devices from which settings must be exported. If this option is not specified, settings are exported from the Zone.
  • -e, --effective - If specified, the effective settings are retrieved; otherwise, only the settings defined or overridden at the source path are retrieved.
settings-revert (srt) (source device or device folder path) (settings name) [...]

Reverts the settings to that of the parent folder.

(source device or device folder path) - The path of the device or device folder relative to /Devices, whose settings must be reverted.

settings-set (ss) (XML file path) [destination device or device folder path] [...]

Sets settings at various levels.

(XML file path) - XML file containing exported settings information. Use settings-export-to-file (setf) to export settings information into a XML file.Accepts the following options:

[settings name] [...] - Names of the settings to be exported. If this option is not specified, all settings are exported.

  • -s, --source=[source device or device folder path] - The path of the device or device folder relative to /Devices for which settings have to be set. If this option is not specified, settings are set at the Zone level.

Subscription Commands

These commands are used to create, modify, and manage subscriptions. Subscription commands begin with subscription- in the long form, or with the letters sr in the short form.

This command accepts the option flags listed in the Global Options section. In addition, it accepts individual options, as listed with the command.

subscription-create (src) (subscription name) (subscription XML file) [parent folder] [options]

Creates a new subscription.

(subscription XML file) - XML file containing exported subscription information. Use subscription-export (sre) to export an existing subscription's information into an XML file. If you want to reuse files, template XML files can be created from subscriptions that were created through ZENworks Control Center. For a sample XML file, refer to nu.xml located in

/opt/novell/zenworks/share/zman/samples/subscriptions on a Linux server.

Accepts the following options:

  • -d, --desc=[description] - Description for the subscription.
  • -s, --sysIDpath=[rhel-systemid]
subscription-folder-create (srfc) (folder name) [parent folder] [options]

Creates a new subscription folder.

Accepts the following option:

  • --desc=[description] - Description for the folder.
subscription-move (srmv) (subscription object path) [destination folder path]

Moves a subscription object to a different folder.

subscription-replicate (srr) (subscription-name) [destination folder path] [options]

Begins a subscription replication.

Accepts the following options:

  • -s, --schedule=[XML filename] - The XML file that contains the schedule to begin subscription. The Eventsch.xml file is not applicable for subscriptions.
  • -r, --fromRepository - The repository from which to replicate content.
subscription-export (sre) (subscription-name) (subscription-data.xml)

Exports subscription information (in XML format) to a file. The XML file is to be used as input for creating subscriptions.

subscription-delete (srd) (Subscription object) […] [options]

Deletes one or more subscription objects. The subscriptions that are in InProgress, Suspended, and Assigned status cannot be deleted.

Accepts the following options:

  • -r, --recursive - Deletes objects inside a folder recursively.
  • -b, --delete-bundles - Deletes all the bundles that were created by the specified subscription.
  • -f, --folder=[subscription folder] - The path of a subscription folder relative to /Subscriptions. If this option is specified, the path of the subscription objects is determined relative to this folder. This option can be used to specify multiple subscription objects under the same folder.
subscription-list (srl) [options]

Lists subscription objects.

Accepts the following options:

  • -r, --recursive - Lists results recursively, including subfolders. If this option is not specified, thecontents of the subfolders are not listed.
  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards *and ? can be used if they are enclosed in quotation marks.
  • -c, --count - Displays the count of the results.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
  • [folder] - Lists the contents of the specified folder. If you do not specify a folder, the contents of the root folder are listed.
subscription-modify (srm) (subscription-name) (subscription-data.xml) [parent folder] [options]

Exports or modifies an existing subscription.

Accepts the following options:

  • -d, --desc=[description] - Description for the subscription.
  • -s, --sysIDpath=[rhel-systemid]
subscription-status (srs) (subscription-name) [options]

Returns the subscription’s status.

Accepts the following options:

  • -s, --suspend - Suspends the replication and changes the subscription status to Suspended.
  • -c, --cancel - Cancels the replication and changes the subscription status to Canceled.

NOTE:The Suspend and Cancel tasks are not supported while performing a dry run.

subscription-channel-list (srcl) (subscription-name) (repo entity type) [options]

Lists data such as bundles, catalogs, and packages.

Accepts the following options:

  • -r, --fromRepository - Bypasses the cache and downloads the metadata from the repository from which to replicate the content.
  • -i, --ignoreFilters - List the content, ignoring any filters that might be configured.
subscription-copy (srcp) (subscription path) (subscription-name) [parent folder] [options]

Copies a subscription.

Accepts the following option:

  • -d, --desc=description - Description for the bundle.
subscription-rename (srrn) (subscription object path) (new name)

Renames a subscription.

For example, to rename a subscription SLES10Update to SLED10Update, run the command as follows:

zman srrn /Subscription/SLES10Update /Subscription/SLED10Update

subscription-proxy-password (srpp) [Subscription Proxy Password]

Configures the proxy password to be used by any subscription during replication.In this command, the proxy password argument is optional. If you do not enter the proxy password argument, the command prompts you to enter the password.

System Update/Product Recognition Update Commands

These commands are used to manage System Updates and Product Recognition Updates (PRUs) to ZENworks. These commands begin with system-update in the long form, or with the letters su in the short form.

system-update-download (sud) (system update or PRU name)

Downloads the latest system updates or PRU.

(system update or PRU name) - System update or PRU name or UID.

system-update-view-available (suva) [options]

Displays a list of all available updates or PRUs ed on the update server or in an update file.

Accepts the following options:

  • -i, --importFile=[path to import file/directory] - Full path to the import file to query.
  • -u, --url=[url to update server] - URL for the system update server to query in the format http://servername:[port]/path.
  • -f, --product=[product code] - The product code to check for updates (for example, zcm, pru).
  • -v, --version=[product base version] - The base version of the product to check for updates (for example, 10.0, 10.1).
system-update-status (sus) (system update or PRU name)

Displays the status of the specified system update or PRU.

(system update or PRU name) - System update or PRU name or UID.

system-update-delete-update (sudu) (system update or PRU name) [options]

Deletes a specified system update or PRU from the zone.

(system update or PRU name) - System update or PRU name or UID.

Accepts the following option:

  • -f, --force - Forces the update to be deleted. This option removes all existing assignments for the System Update. Use with caution, and only if you are sure that the update is not in an active state.
system-update-cancel-download (sucd) (system update or PRU name)

Cancels the download of the system update or PRU.

(system update or PRU name) - System update or PRU name or UID.

system-update-assign (sua) (system update name) [device path] [...] [option]

Assigns the authorized system update to devices.

(system update name) - System update name or UID.

[device path] [...] - The path of the device relative to /Devices.

Accepts the following option:

  • -a, --all - Assign to all devices.
system-update-list-assign (sula) (device path)

Lists all updates assigned to the specified device or group.

(device path) - The path of the device relative to /Devices.

system-update-authorize (suaz) (system update or PRU name)

Authorizes an update or PRU.

(system update or PRU name) - System update or PRU name or UID.

system-update-baseline (sub) (system update name)

Schedules an attempt to set the specified update as the baseline update.

(system update name) - System update name or UID.

system-update-import (sui) (path to update) [system update or PRU name] [-b, --checkbaseline]

Imports a system update or PRU from a ZIP file or directory into the Zone. After the update or PRU is in the ZENworks system, it can be managed the same way that online updates or PRUs are managed.

(path to update) - The full path to the update or PRU ZIP file or directory.

(system update or PRU name) - System update or PRU name or UID.

(-b, --checkbaseline) - Check for and if applicable, baseline the update. The default is to not baseline the update.

system-update-activate-entitlement (suae) (mail ID) (activation code)

Activates the System Update entitlement for the ZENworks 11SP3 software in the Management Zone to receive the latest version of ZENworks System Updates and Product Recognition Updates (PRUs) from the Novell Customer Center (NCC) server.

(mail ID) - A valid e-mail address to be used for communication from Novell. We recommended that you specify the e-mail address used to purchase the System Update Maintenance Entitlement.

(activation code) - The System Update entitlement activation code.

NOTE:Before activating the entitlement, ensure that the Primary Server you want to use to activate the entitlement can communicate with the NCC server.

system-update-view-entitlement-status (suves)

Displays the System Update entitlement status.

system-update-rebuild-packages (surp) (system update name)

Rebuilds the deployment packages on this server with the content of the specified update.

(system update name) - System update name or UID.

-f, --force - Force the package to be rebuild, even if there are no new packages included in the update.

system-update-patch-file (supf) (system update name) (path to patch)

Patches an update with new versions of file(s).

(system update name) - System update name or UID.

(path to patch) - Full path of the zip file or the folder where patch files can be found.

(system-update-create-package | sucp) (system update name) [device path] [-n|--packagename=Standalone update package name] [-p|--platform=OS Platform] [-a|--arch=Architecture]

Creates the specified standalone update package. This command can be used to create a package for a specific device, using the Update GUID and the device GUID, or to create a package for the platform using the platform and architecture details.

(system update name) - System update name or UID.

[device path] - Path of the device relative to /Devices.

-n, --packagename=<Standalone update package name> - Name of standalone update package. If not specified, name is calculated from the device name or the platform specified.

-p, --platform=<OS Platform> - OS platform for the standalone update package. Valid value is Windows.

-a, --arch=<Architecture> - Device architecture for the standalone update package. Valid values are 32 or 64.

User Commands

These commands are used to manage users, belonging to the user sources configured in ZENworks. The user sources are to be configured from an existing LDAP Authoritative Source like e‑Directory or Active Directory. User commands begin with user- in the long form, or with the letter u in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

user-add-bundle (uab) (user object path) (bundle or bundle group) [...] [options]

Assigns bundles to a user object.

Accepts the following options:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
  • -I, --icon-location=[application location XML file] - XML file that contains the locations to place the icon for the bundle application. For the XML file format, refer to IconLocation.xml located in /opt/novell/zenworks/share/zman/samples/bundles on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ bundles on a Windows server.
  • -d, --distribution-schedule=[distribution schedule XML file] - XML file that contains the distribution schedule.
  • -l, --launch-schedule=[launch schedule XML file] - XML file that contains the launch schedule.
  • -a, --availability-schedule=[availability schedule XML file] - XML file that contains the availability schedule. For the schedule XML file templates, refer to the XML files located in /opt/novell/zenworks/share/zman/samples/schedules on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ schedules on a Windows server.
  • -i, --install-immediately - Installs the bundle immediately after distribution. To use this option, you must also specify the distribution schedule. The distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -L, --launch-immediately - Launches the bundle immediately after installation. To use this option, you must also specify the distribution schedule. The distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -n, --distribute-now - Sets the distribution schedule to distribute the bundle immediately. If this option is specified, the --distribution-schedule and --distribute-on-device-refresh options are ignored. The --distribute-now, --distribute-on-device-refresh, and --distribution-schedule options are mutually exclusive and are used to set the distribution schedule. The --distribute-now option is considered first, followed by --distribute-on-device-refresh and --distribution-schedule.
  • -r, --distribute-on-device-refresh - Sets the distribution schedule to distribute the bundle on device refresh. If this option is specified, the --distribution-schedule option is ignored.
  • -s, --launch-on-device-refresh - Sets the launch schedule to launch the bundle on device refresh. If this option is specified, the --launch-schedule option is ignored.
user-add-policy (uap) (user object path) (policy or policy group) [...] [options]

Assigns policies to a user object.

Accepts the following options:

  • -e, --enforce-now - Enforces the policy immediately on all assigned devices.
  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
user-container-create (ucc) (user source) (user container) (display name)

Adds a user container to a user source configured in ZENworks.

(user container) - The user container to be added in RDN (Relative Distinguished Name) format, relative to the root context of the LDAP Source.

(display name) - Displays the name for the user container.

user-group-add (uga) (ZENworks user group path) (user path) [...] [options]

Adds users to a ZENworks user group.

Accepts the following option:

  • -f, --folder=[user folder] - The path of a user folder relative to /Users. If this option is specified, the path of the user objects is determined relative to this folder. This can be used to specify multiple user objects under the same folder.
user-group-create (ugc)(group name)[options]

Creates a ZENworks user group and adds members to it.

Accepts the following options:

  • --desc=[description] - Description for the group.
  • -m, --members=[user path][...] - The path of the users relative to /Users.
  • -f, --folder=[user folder] - The path of a user folder relative to /Users. If this option is specified, the path of the user objects is determined relative to this folder. This can be used to specify multiple user objects under the same folder.
user-group-delete (ugd) (ZENworks user group path) [...]

Deletes one or more ZENworks user groups.

(ZENworks user group path) [...] - The path of the ZENworks user group relative to /Users/ZENworks User Groups.

user-group-members (ugm) (user group path) [options]

Lists members of a ZENworks user group or LDAP Directory user group.

Accepts the following option:

  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
user-group-remove (ugr)(ZENworks user group path) (user path) [...] [options]

Removes users from a ZENworks user group.

Accepts the following option:

  • -f, --folder=[user folder] - The path of a user folder relative to /Users. If this option is specified, the path of the user objects is determined relative to this folder. This can be used to specify multiple user objects under the same folder.
user-info (ui) (user path)

Lists detailed information about a user.

user-list (ul) [options] [folder]

Lists user objects.

Accepts the following options:

  • -r, --recursive - Lists results recursively including subfolders. If this option is not specified, the contents of the subfolders are not listed.
  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotation marks.
  • -t, --typefilter=[type filter][...] - Displays results matching the comma-separated list of object types specified. Valid values are user, group, and folder.
  • -c, --count - Displays the count of the results.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
user-list-bundles (ulb) (user object path) [options]

Lists bundles assigned to a user object.

Accepts the following options:

  • -a, --all - Lists both effective and non-effective bundles.
  • -e, --effective - Lists only effective bundles.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
user-list-groups (ulg) (user path) [options]

Lists groups of which the given user is a member.

Accepts the following option:

  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
user-list-policies (ulp) (user object path) [options]

Lists policies assigned to a user object.

  • -a, --all - Lists both effective and non-effective policies.
  • -e, --effective - Lists only effective policies.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
user-logged-in-devices (ulid) (user path)

Displays the devices on which a user is logged in.

user-primary-workstation (upws) (user path)

Lists the user’s primary workstation, number of logins, and number of minutes that the user has been logged in to the primary workstation.

user-remove-bundle (urb) (user object path) (bundle or bundle group) [...] [options]

Removes bundles assigned to a user object.

Accepts the following option:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
user-remove-policy (urp) (user object path) (policy or policy group) [...] [options]

Removes policies assigned to a user object.

Accepts the following option:

  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
user-reorder-policies (urop) (user object path) (current position) (new position)

Changes the order of policies assigned to a user.

user-source-add-connection (usac) (user source) (connection name) (server address) (server port) [options]

Adds a new server connection for a user source.

Accepts the following options:

-a, --accept-certificate - Accepts the certificate presented by the user source when SSL mode is chosen. This option is provided to avoid interactive mode for scripting. It is advisable to view the certificate and then accept it.

-s, --use-ssl - Specifies that SSL should be used when accessing the new server.

user-set-as-test (usat) (user object path)

Sets an user as a test user.

Examples

To set user1 as a test user:

zman usat user1

user-set-as-nontest (usan) (user object path)

Sets an user as a non-test user.

Examples

To set user1 as a non-test user:

zman usan user1

user-source-create (usc) (user source XML file path) [options]

Configures a user source.

Accepts the following option:

-a, --accept-certificate - Accepts the certificate presented by the user source when SSL mode is chosen. This option is provided to avoid interactive mode for scripting. It is advisable to view the certificate and then accept it.

user-source-list (usl)

Lists the configured user sources.

user-source-list-connections (uslc) (user source)

List the server connections for a user source.

user-source-remove-connection (usrc) (user source) (connection name)

Removes a server connection from a user source.

user-source-trustedcert-add (usta) (certificate alias) (certificate file path)

Adds an additional trusted certificate for another LDAP server that can be referred to during the processing of an LDAP search request when using secure user source connections.

  • (certificate alias) - The alias used to identify the certificate in the key store.
  • (certificate file path) - The path to the DER format certificate file.
user-source-trustedcert-list (ustl)

Lists the additional trusted certificates used for secure user source connections.

user-source-trustedcert-remove (user-source-trustedcert-remove|ustr) (certificate alias)

Removes a trusted certificate used for secure user source connections.

  • (certificate alias) - The alias used to identify the certificate in the key store.
user-view-all-bundles-status (uvabs) (user path) [options]

Displays the advanced deployment status of bundles assigned to a user.

Accepts the following options:

  • --statusfilter=[status type][...] - Filters on the status of Bundle Distribution and Install Events. Valid values are S, F, and P (Success, Failure, and Pending). A comma-separated list of status types can be given.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
user-view-all-policies-status (uvaps) (user path) [options]

Displays the advanced deployment status of policies assigned to a user.

Accepts the following options:

  • --statusfilter=[status type][...] - Filters on the status of Policy Apply Event. Valid values are S, F, and P (Success, Failure, and Pending). A comma-separated list of status types can be given.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.

Workstation Commands

These commands are used to manage workstations. Workstation commands begin with workstation- in the long form, or with the letter w in the short form.

All of the commands below accept the option flags listed in the Global Options section. In addition, they accept individual options as listed with each command.

workstation-add-bundle (wab) (workstation object path) (bundle or bundle group) [...] [options]

Assigns bundles to a workstation object.

Accepts the following options:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
  • -I, --icon-location=[application location XML file] - XML file that contains the locations to place the icon for the bundle application. For the XML file format, refer to IconLocation.xml located in /opt/novell/zenworks/share/zman/samples/bundles on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ bundles on a Windows server.
  • -d, --distribution-schedule=[distribution schedule XML file] - XML file that contains the distribution schedule.
  • -l, --launch-schedule=[launch schedule XML file] - XML file that contains the launch schedule.
  • -a, --availability-schedule=[availability schedule XML file] - XML file that contains the availability schedule. For the schedule XML file templates, refer to the XML files located in /opt/novell/zenworks/share/zman/samples/schedules on a Linux server or Installation_directory:\Novell\Zenworks\share\zman\samples\ schedules on a Windows server.
  • -i, --install-immediately - Installs the bundle immediately after distribution. To use this option, you must also specify the distribution schedule. The distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -L, --launch-immediately - Launches the bundle immediately after installation. To use this option, you must also specify the distribution schedule. The distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -n, --distribute-now - Sets the distribution schedule to distribute the bundle immediately. If this option is specified, the --distribution-schedule and --distribute-on-device-refresh options are ignored. The --distribute-now, --distribute-on-device-refresh and --distribution-schedule options are mutually exclusive and are used to set the distribution schedule. The --distribute-now option is considered first, followed by --distribute-on-device-refresh and --distribution-schedule.
  • -r, --distribute-on-device-refresh - Sets the distribution schedule to distribute the bundle on device refresh. If this option is specified, the --distribution-schedule option is ignored.
  • -s, --launch-on-device-refresh - Sets the launch schedule to launch the bundle on device refresh. If this option is specified, the --launch-schedule option is ignored.
  • -w, --wakeup-device-on-distribution - Wakes up the device by using Wake-On-LAN if it is shut down while distributing the bundle. To use this option, you must also specify the Distribution schedule. The Distribution schedule can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-device-refresh option.
  • -D, --dry-run - Tests and displays the requested actions but does not actually perform them.
  • -B, --broadcast=[Broadcast address][...] - A comma-separated list of addresses used to broadcast the Wake-On-LAN magic packets. This option is used only if you choose to wake up the device by using Wake-On-LAN. A valid IP address is a valid value.
  • -S, --server=[Path of the Primary or Proxy Server objects relative to /Devices][...] - A comma-separated list of Primary or Proxy Server objects used to wake up the device. This option is used only if you choose to wake up the device by using Wake-On-LAN.
  • -C, --retries=[Number of retries] - Number of times the Wake-On-LAN magic packets are sent to the device. This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 0 and 5. The default value is 1.
  • -T, --timeout=[Time interval between retries] - The time interval between two retries. This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 2 and 10 (in minutes). The default value is 2.
workstation-add-policy (wap) (workstation object path) (policy or policy group) [...] [options]

Assigns policies to a workstation object.

Accepts the following options:

  • -c, --conflicts=[policy conflict resolution order] - Determines how policy conflicts are resolved. Valid values are userlast or 1, devicelast or 2, deviceonly or 3, useronly or 4. For userlast, device-associated policies are applied first, followed by user-associated policies. For devicelast, user-associated policies are applied first, followed by device-associated policies. For deviceonly, user-associated policies are ignored. For useronly, device-associated policies are ignored. If this option is not specified, userlast is taken as the default value.
  • -e, --enforce-now - Enforces the policy immediately on all assigned devices.
  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
workstation-delete (wd) workstation object path) [...] [options]

Deletes one or more workstation objects.

(workstation object path) [...] - The path of the workstation objects (workstation, workstation folder or workstation group) relative to /Devices/Workstations. The wildcard * can be used in the object names if it is enclosed in quotations. Exercise caution while using wildcards for deleting objects.

Accepts the following options:

  • -r, --recursive - Deletes objects inside a folder recursively.
  • -f, --folder=[workstation folder] - The path of a workstation folder relative to /Devices/Workstations. If this option is specified, the path of the workstation objects is determined relative to this folder. This can be used to specify multiple workstation objects under the same folder.
workstation-folder-create (wfc) (folder name) [parent folder] [options]

Creates a new folder for containing workstations.

Accepts the following option:

  • --desc=[description] - Description for the folder.
workstation-group-add (wga) (workstation group path) (workstation path) [...] [options]

Adds workstations to a workstation group.

Accepts the following option:

  • -f, --folder=[workstation folder] - The path of a workstation folder relative to /Devices/Workstations. If this option is specified, the path of the workstation objects is determined relative to this folder. This can be used to specify multiple workstation objects under the same folder.
workstation-group-create (wgc) (group name) [parent folder] [options]

Creates a workstation group and adds members to it.

Accepts the following options:

  • --desc=[description] - Description for the group.
  • -m, --members=[workstation path][...] - The path of the workstations relative to /Devices/Workstations.
  • -f, --folder=[workstation folder] - The path of a workstation folder relative to /Devices/Workstations. If this option is specified, the path of the workstation objects is determined relative to this folder. This can be used to specify multiple workstation objects under the same folder.
workstation-group-members (wgm) [options] (workstation group path)

Lists members of a workstation group or a dynamic workstation group.

Accepts the following option:

  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
workstation-group-remove (wgr) (workstation group path) (workstation path) [...] [options]

Removes workstations from a workstation group.

Accepts the following option:

  • -f, --folder=[workstation folder] - The path of a workstation folder relative to /Devices/Workstations. If this option is specified, the path of the workstation objects is determined relative to this folder. This can be used to specify multiple workstation objects under the same folder.
workstation-info (wi) (workstation path)

Lists detailed information about a workstation.

workstation-list (wl) [folder] [options]

Lists workstation objects.

Accepts the following options:

  • -r, --recursive - Lists results recursively including subfolders. If this option is not specified, the contents of the subfolders are not listed.
  • -n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards * and ? can be used if they are enclosed in quotation marks.
  • -t, --typefilter=[type filter][...] - Displays results matching the comma-separated list of object types specified. Valid values are device, group, and folder.
  • -c, --count - Displays the count of the results.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
  • -f, --flagfilter=[flag filter][...] - Displays results matching the comma-separated list of flags specified. Valid values are retired, notretired, test, and non-test.
workstation-list-bundles (wlb) (workstation object path) [options]

Lists bundles assigned to a workstation object.

Accepts the following options:

  • -a, --all - Lists both effective and non-effective bundles.
  • -e, --effective - Lists only effective bundles.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
workstation-list-groups (wlg) (workstation path) [options]

Lists groups of which the given workstation is a member.

Accepts the following option:

  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
workstation-list-policies (wlp) (workstation object path) [options]

Lists policies assigned to a workstation object.

Accepts the following options:

  • -a, --all - Lists both effective and non-effective policies.
  • -e, --effective - Lists only effective policies.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
workstation-move (wmv) (workstation object path) [destination folder path]

Moves a workstation object to a different folder.

workstation-refresh (wrf) (workstation object path) [...] [options]

Refreshes the ZENworks Adaptive Agent in the workstations.

Accepts the following option:

-f, --folder=[workstation folder] - The path of a workstation folder relative to /Devices/Workstations. If this option is specified, the path of the workstation objects is determined relative to this folder. This can be used to specify multiple workstation objects under the same folder.

--server=<server/server folder/server group object path>[...] - The path of Primary Server objects (server, server folder or server group) relative to /Devices/Servers to send Quick Task notifications.

--notify=<minutes> - Time in minutes to notify all devices.

--expire=<minutes> - Time in minutes for expiry after creation of the quick task. Specify 0 to expire immediately.

--currentserver - Add quick task to the current Primary Server.

--anyserver - Add quick task in any of the Primary Servers.

--expirenever - The quick task never expires in the Primary Server.

workstation-remove-bundle (wrb) (workstation object path) (bundle or bundle group) [...] [options]

Removes bundles assigned to a workstation object.

Accepts the following option:

  • -f, --folder=[bundle folder] - The path of a bundle folder relative to /Bundles. If this option is specified, the path of the bundle objects is determined relative to this folder. This can be used to specify multiple bundle objects under the same folder.
workstation-remove-policy (wrp) (workstation object path) (policy or policy group) [...] [options]

Removes policies assigned to a workstation object.

Accepts the following option:

  • -f, --folder=[policy folder] - The path of a policy folder relative to /Policies. If this option is specified, the path of the policy objects is determined relative to this folder. This can be used to specify multiple policy objects under the same folder.
workstation-rename (wr) (workstation object path) (new name)

Renames a workstation object.

workstation-reorder-policies (wrop) (workstation object path) (current position) (new position)

Changes the order of policies assigned to a workstation. Use the workstation-list-policies command to get the order of assigned policies.

workstation-retire (wret) (workstation object path)

Retires the selected workstation from your ZENworks system at its next refresh. Retiring a device is different from deleting a device. When you retire a device, its GUID is retained (as opposed to when you delete a device, which also deletes its GUID). As a result, all inventory information is retained and is accessible but all policy and bundle assignments are removed. If you reactivate the device in the future, its assignments are restored.

Accepts the following option:

  • -i, --immediate - Forces a device refresh to immediately retire the device.
workstation-set-as-test (wsat) (workstation object path)

Sets a workstation as a test device.

Examples

To set workstation1 as a test device:

zman wsat workstation1

workstation-set-as-nontest (wsan) (workstation object path)

Sets a workstation as a non-test device.

Examples

To set workstation1 as a non-test device:

zman wsan workstation1

workstation-unretire (wuret) (workstation object path)

Reactivates the selected workstation at its next refresh and reapplies all policy and bundle assignments that the device previously had.

Accepts the following option:

  • -i, --immediate - Forces a device refresh to immediately unretire the device.
workstation-view-all-bundles-status (wvabs) (workstation path) [options]

Displays the advanced deployment status of bundles assigned to a workstation.

Accepts the following options:

  • --statusfilter=[status type][...] - Filter on the status of Bundle Distribution and Install Events. Valid values are S, R, C, A, F, and P (Success, Partial Success, Completed, Partial Complete, Failure, and Pending). A comma-separated list of status types can be given.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.

Examples

To view the deployment status of bundles assigned to workstation1:

zman wvabs workstation1

To view the deployment status of bundles assigned to workstation1 having bundle deployment status as success or pending:

zman wvabs workstation1 --statusfilter S,P

workstation-view-all-policies-status (wvaps) (workstation path) [options]

Displays the advanced deployment status of policies assigned to a workstation.

Accepts the following options:

  • --statusfilter=[status type][...] - Filters on the status of Policy Apply Event. Valid values are S, F, and P (Success, Failure, and Pending). A comma-separated list of status types can be given.
  • -s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
workstation-wakeup (ww) (workstation object path) [...] [options]

Wakes up a workstation by using Wake-On-LAN.

Accepts the following options:

  • -f, --folder=[workstation folder] - The path of a workstation folder relative to /Devices/Workstations. If this option is specified, the path of the workstation objects is determined relative to this folder. This can be used to specify multiple workstation objects under the same folder.
  • -b, --broadcast=[Broadcast address][...] - A comma-separated list of addresses used to broadcast the Wake-On-LAN magic packets. This option is used only if you choose to wake up the device by using Wake-On-LAN. A valid IP address is a valid value.
  • -s, --server=[Path of the Primary or Proxy Server objects relative to /Devices][...] - A comma-separated list of Primary or Proxy Server objects used to wake up the device. This option is used only if you choose to wake up the device by using Wake-On-LAN.
  • -C, --retries=[Number of retries] - Number of times the Wake-On-LAN magic packets are sent to the device(s). This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 0 and 5. The default value is 1.
  • -t, --timeout=[Time interval between retries] - The time interval between two retries. This option is used only if you choose to wake up the device by using Wake-On-LAN. The value must be between 2 and 10 (in minutes). The default value is 2.

ZENworks Server Commands

These commands are used to manage servers that have ZENworks installed. ZENworks Server commands begin with zenserver- in the long form, or with the letters zs in the short form.

zenserver-backup (zsb) (file path) [Passphrase]

Backs up the configuration files needed to duplicate this server on another ZENworks Server.

  • (file path) - Path to the file to which the ZENworks Server configuration files are backed up. If the server contains the embedded database, use the database-backup command to back up the database. To restore the server on another server installation, you must first restore the configuration files by using the zenserver-restore command, and then restore the database. The command prompts for a passphrase to encrypt the backed-up file. Make a note of the specified passphrase because you need to enter it for restoring the server.
  • [Passphase] - Path of the file to which the ZENworks Server configuration files are backed up. If the server contains the embedded database, use the database-backup command to back up the database. To restore the server on another server installation, you must first restore the configuration files by using the zenserver-restore command, and then restore the database. The command prompts for a passphase to encrypt the backup files.
zenserver-restore (zsr) (file path) [Passphrase]

Restores the backed-up configuration files of the crashed ZENworks Server to a new ZENworks Server installation.

  • (file path) - Path to the file containing the backed-up configuration files to be restored. The server should have the same DNS name and the IP address as the server that is being restored. When the command prompts for a passphrase to decrypt the backed-up file, enter the passphrase that was used to encrypt the files when they were backed up.
  • [Passphase] - Path of the file to which the ZENworks Server configuration files are backed up. If the server contains the embedded database, use the database-backup command to back up the database. To restore the server on another server installation, you must first restore the configuration files by using the zenserver-restore command, and then restore the database. The command prompts for a passphase to encrypt the backup files.

Global Options

The following options can be applied to any zman command:

-h, --help

Provides help at various levels. Refer to the Guide to Usage section for more details on using help.

--usage

Displays the syntax of the command.

--terse

Displays terse output.

--debug

Displays debugging output.

-V , --verbose

Enables verbose output.

--quiet

Quiets output, printing only error messages.

-U, --User=<username>

Provides a username. If it is not provided, you are prompted.

-P, --Password=<password>

Specifies a password. If it is not provided, you are prompted.

---host=<host>

Specifies the host name or IP address to connect to (default: localhost).

--port=<port>

Specifies the port that the server is listening on (default: 443).

--cleartext

Disables SSL for debugging purposes. If the port is not set to the clear text port, it connects to port 80 by default.

-R, --Redirect=<file path>

Redirects the output of the screen to a file. Use this option over the command line redirection operator (>) to save data in UTF-8 format and to preserve non-English characters.

-G, --ignore-global-file

Ignore the global options file specified in zman-config.properties.

Security

Running each command requires administrator authorization. To avoid entering administrator credentials for every command, use the admin-store-credential command to store the credentials. The credentials are encrypted and stored in the home folder of the operating system user running the command. The credentials only apply to that logged-on user. It is safer to clear the information by running the admin-clear-credential command after the execution of all the other commands is done.

IMPORTANT:Although command line options for entering usernames and passwords exist, avoid using them. In Linux, they display in the ps listing. In addition, pressing the Up-arrow or Down-arrow keys displays the previous commands entered in both Windows and Linux. Either enter the credentials when prompted or use the admin-store-credential command.

Files

zman-config.properties is a property file used to configure zman and is located in the following locations:

  • On Windows: %ZENWORKS_HOME%\conf\zman\properties

  • On Linux: /etc/opt/novell/zenworks/zman/properties

The various options available are:

  • RENDERER_SCROLLSIZE: Controls the output of a list command globally. Results are retrieved and displayed in counts of scroll size specified. This setting can be overridden by using the --scrollsize option in the list commands.

  • GLOBAL_OPTIONS_FILE: Global options can be added to every command by storing them in a file and specifying the path of the file as the value to this property. For Windows files, use \\ instead of \. The contents of the file should be in a single line similar to a command.

    For example:

    GLOBAL_OPTIONS_FILE=C:\\zman\\globaloptions.txt

    Sample content for the file is as follows:

    --host 123.34.45.56 --port 8080 –cleartext --verbose

    To bypass the options stored in this file, use the –ignore-global-file option. All the global options except, -U|--User and -P|--Password can be stored in the global options file. The admin-store-credential and admin-clear-credential commands should be used to add administrator credentials to each command. Refer to the Security section for guidelines on using administrator credentials.

  • GLOBAL_OPTIONS_HELP: Global options for the commands are displayed in the help for every command. To turn off the display of global options, set GLOBAL_OPTIONS_HELP=false.

  • DEBUG_LEVEL: Controls the volume of debug messages logged into the zman.log file located in Installation_drive:\Novell\zenworks\logs in Windows and /var/opt/novell/log/zenworks in Linux. Level 3, which is the default, logs the command entered and exception stack traces if any errors are encountered. Level 4 logs the command entered, the output of the command, and more debug messages.

Exit Codes

zman returns exit codes in the range of 0-255. 0 indicates successful execution of the command; 1-255 indicate an error in execution.

  • 0 - Success.

Exit Codes for Parse Errors:

  • 1 - An unknown parsing error has occurred.
  • 2 - A mandatory argument is not specified.
  • 3 - An unknown flag is specified
  • 4 - A value is specified for a switch parameter.
  • 5 - No value is specified for a flagged option.
  • 6 - An unexpected additional argument is specified.
  • 7 - An invalid value is specified.
  • 8 - Unable to convert a value to the type expected.
  • 9 - Unknown command.
  • 10 - No options are entered when at least one is required. For example, to modify rights, you must specify at least the Assign option or the Revoke option.

Exit Codes for General Errors:

  • 11 - An unknown error has occurred.
  • 12 - The feature is not available because one of the dependent zman jar files is missing.
  • 13 - Authentication failed.
  • 14 - An empty string is specified for username or password, or the specified password does not meet the minimum length requirements.
  • 15 - The ZENworks license has expired.
  • 16 - Connection failure. The or the database device might be down.
  • 17 - The ZENworks administrator does not have sufficient rights to perform this operation.
  • 18 - Unable to read the certificate for establishing SSL communication.
  • 19 - This command can be run only on a local host.

Exit Codes for General Object Related Errors:

  • 21 - The object specified is not of the expected type. For example, a bundle is specified instead of a device.
  • 22 - The object could not be found.
  • 23 - An object with the same name already exists in the specified folder.
  • 24 - The object specified is in a different directory than the specified folder.
  • 25 - A parent folder cannot be moved into its subfolder.
  • 26 - The object is not renamable.
  • 27 - The object is not deletable.
  • 28 - Attempting to delete a non-empty folder.
  • 29 - The object is already a member of the group.
  • 30 - The object is not member of the group.
  • 31 - The object is already assigned to the device or user.
  • 32 - The object is not yet assigned to the device or user.
  • 33 - The object type is invalid to assign to a device or user.
  • 34 - Assignment of the object to the device is not allowed. For example, the user-specific policy cannot be assigned to a device.

Exit Codes for Other General Errors:

  • 41 - The specified name is invalid. For example, the object cannot have special characters such as * or % in its name.
  • 42 - The absolute path starting with a front slash (/) is expected.
  • 43 - An invalid schedule is specified.
  • 44 - The XML file did not contain the expected input. For example, an exported action set XML file is given as input when an exported bundle XML file was expected.
  • 45 - The XML file did not conform to the expected schema.
  • 46 - An invalid GUID is specified.
  • 47 - The specified value has exceeded the maximum length.
  • 48 - A dependent argument has not been specified. For example, the command uses the option to install a bundle immediately on distribution, but does not specify the distribution schedule.

Exit Codes for File Related Errors:

  • 61 - A directory is expected.
  • 62 - The file does not exist or is a directory.
  • 63 - The file already exists
  • 64 - An error occurred while reading the file.
  • 65 - An error occurred while writing to the file.
  • 66 - An error occurred while creating the file.
  • 67 - An error occurred while creating the directory
  • 68 - An error occurred while copying the file.
  • 69 - An error occurred while uploading the file.
  • 70 - Unable to load the file because there is not sufficient disk space on the target device.

Exit Codes Specific to Registration Commands:

  • 71 - The folder and the group being associated to the registration key or rule set are not of the same device type.
  • 72 - A rule set should have at least one rule.

Exit Codes Common to Bundle and Policy Commands:

  • 76 - Content creation failed.
  • 77 - Copying the content file to the temporary directory was canceled because a file by that name already exists.
  • 78 - Creation of a bundle or a policy with file content is being attempted on a server that is not a Content Server.

Exit Codes Specific to Bundle Commands:

  • 81 - The file specified for the bundle icon is not a valid image file.
  • 82 - The action set does not contain any actions to reorder, remove, or export.
  • 83 - The action set does not contain any actions at the given position to reorder, remove, or export.
  • 84 - The action set is not supported for the bundle type. For example, the Preboot action set is not supported for the Windows bundle.
  • 85 - The action is not supported for the action set. For example, the Verify Bundle action is not supported for the Install action set.
  • 86 - The action is non-deletable.
  • 87 - The action type is singular; you cannot add the same action type more than once to an action set.
  • 88 ‑ The action type does not support dependent bundles. For example, you cannot specify a dependent bundle path for the Install MSI action.
  • 89 - The specified dependent bundle path leads to a circular dependency of bundles.
  • 90 - Failed to create the Wake-On-LAN schedule when assigning bundles.
  • 91 - Failed to remove the Wake-On-LAN schedule when unassigning bundles.

Exit Codes Common to Device and User Command:

  • 101 - The device or user does not have any bundles or policies associated to it.

Exit Codes Specific to User Commands:

  • 106 - The User Source Certificate has expired.
  • 107 - SSL is required to connect to the User Source.

Exit Codes Specific to License Commands:

  • 116 - Unable to activate the license.
  • 118 - The server does not have the Certificate Authority role.
  • 119 - The server does not have the files required to enable the Certificate Authority role.
  • 120 - The Certificate Authority used is not the ZENworks Internal Certificate Authority.

Exit Codes Specific to Administrator Command:

  • 121 - The right does not belong to the rights category.

Exit Codes Specific to Database Commands:

  • 126 - The database is not an embedded database.
  • 127 - The SQL statement is invalid.
  • 128 - An SQL exception has been encountered.

Exit Codes Specific to Deployment Commands:

  • 131 - An invalid IP address or hostname has been specified.
  • 132 - Credentials required to connect to the device are not specified.
  • 133 - A managed device or a device that has been already scheduled for deployment is specified.

Exit Codes Specific to Report Commands:

  • 136 - Failed to delete the report.
  • 137 - Failed to submit a request for the report generation.
  • 138 - Invalid report document.

ZeUS Commands

The zman zeus command is used to import the latest ZeUS MSIs into the Zone and get the current ZeUS configuration.

zeus-msi-config | zmc

Gives the configuration of the last imported ZeUS msi.

zeus-msi-import | zmi (path to ZeUS Msis) [-f|--force]

Imports the latest ZeUS MSIs into the Zone.

(path to ZeUS Msis) - Provide the full path to the ZeUS directory.

Accepts the following options:

-f, --force - Reimports the MSI even if the versions are the same. This will overwrite the current zeus configuration in the server.

zac zeus-refresh / zeus-ref

Retrieves the system update when it is assigned to a device.