Version 10.4.9 (2013-01-10)
This SUSE Linux Enterprise Desktop 10 serves several purposes:
Provide enhancements to the SLED 10 code base.
Provide all maintenance fixes released since GA of SLED 10.
Provide an easy update (see README) of your system or individual packages to the latest Service Pack level. This is especially useful if you cannot use online update mechanisms.
Provide an easy fresh install (see README) using the latest kernel, drivers, and installer updates.
Include PTFs (special fixes for customers) which were folded back into the SLED 10 common code base making them part of the maintained code base.
Through joint testing and maximum care, we try hard not to break any ISV certification with a Service Pack, but we recommend checking with your ISV about your application's certification status.
Updated acroread to version 9.4.1
Added fonts for Acroread: Japanese, Korean, simplified Chinese, Traditional Chinese
Updated autofs5 to version 5.0.5
Updated clamav to version 0.96.5
Updated finch to version 2.6.6
Updated Firefox to version 3.6
Updated gdb to version 7.1
Updated IBM Java 1.5.0 to SR12
Added SUN Java 1.6.0u23
Updated mhtml-firefox to version 0.5
Updated mozilla-nspr to version 4.8.6
Updated mozilla-nss to version 3.12.8
Updated mozilla-xulrunner to version 1.9.2
Updated OpenOffice.org suite to LibreOffice 184.108.40.206
Updated pidgin to version 2.6.6
Updated postgresql-libs to version 8.1.22
Updated sudo to version 1.6.9p23
Updated supportutils to version 1.20
Updated timezone to version 2010l
Updated zypper to version 0.6.201
Dropped Epiphany. For more information, see Section 8.
Dropped RealPlayer. For more information, see Section 8.
Firefox 2 has been replaced with Firefox 3
Updated autofs5 to version 5.0.3
Updated dhcp to version 3.0.7
Updated SUN Java 1.4.2 to version 220.127.116.11
Updated IBM Java 1.5.0 to SR9-ssu
Updated pciutils to version 3.1.2
Updated postgresql to version 8.1.17
Updated samba to version 3.0.36
Updated pure-ftpd to version 1.0.22
Intel Wireless drivers have been updated:
Intel Wireless drivers have been updated:
Firmware was updated, too: iwl3945 - 18.104.22.168, iwl4965 - 22.214.171.124, iwl5000 - 5.4.A.11
Updated cxgb3 driver to OFED version 1.4.1 and added firmware in version 7.1.0
Added Mellanox (mlx) driver to OFED version 1.4.1.
Added e1000e driver in version 1.2.17-NAPI
Updated tg3 driver to version 3.114b
Updated bnx2x driver to version 1.62.00-3
Updated bnx2 driver to version 2.0.18-suse
Added ixgbe driver in version 3.0.14-NAPI
Updated e1000 driver to version 126.96.36.199-NAPI
Updated e100 driver to version 3.5.24-k3-NAPI
Updated netxen driver to version 4.0.74
Added igb driver in version 2.3.4
Updated sky2 driver to version 1.22bp
Added Neptune (niu) driver in version 0.9
Added QLogic 10G LAN driver (qlge) driver in version 1.00.00.23
Added Emulex 10G LAN (be2net) driver in version 2.102.453s
Updated qla2xxx to version 8.03.01.12.10.3-k4
Updated qla4xxx to version 5.02.03.00.10.4-d0
Updated megaraid_sas to version 00.00.05.25-SL1
Updated aacraid driver to version 1.1-5-suse
Added support for new hardware to cciss driver
Updated lpfc driver to version 188.8.131.52
Updated fusion driver to version 3.04.17_suse
Added LSI MPT Fusion SAS 2.0 Device driver (mpt2sas) in version 06.102.00.00
Updated CIFS to version 1.51
Updated OCFS2 to version 1.4.8-1-SLES
For the latest version of the SUSE® Linux* Enterprise Desktop 10 Release Notes, see http://www.novell.com/linux/releasenotes/i586/SUSE-SLED/10-SP4/.
If you plan to add additional storage devices to your system after the OS installation, we strongly recommend to use persistent device names for all storage devices during installation. The installer by default uses the kernel device names.
How to proceed:
During installation, enter the partitioner. For each partition, select "Edit" and go to the "FStab Options" dialog. Any mount option except "Device name" provide you persistent devicenames.
To switch an already installed system to using persistent device names, proceed as described above for all existing partitions. In addition, rerun the boot loader module in YaST to switch the bootloader to using the persistent device name also. Just start the module and select "Finish" to write the new proposed configuration to disk. This needs to be done before adding new storage devices.
For further information, see http://en.opensuse.org/SDB:Persistent_storage_device_names.
During remote system installation over SSH use "Traditional Method without the NetworkManager Applet" as the network mode. After the installation you can set the network mode to "User-Controlled Interfaces with the NetworkManager Applet", if wanted.
If you set the network mode to NetworkManager during the installation over SSH, the connection will get lost after rebooting for the second stage of the installation due to reconfiguration of the network, which is leasing new settings from DHCP.
CJK languages (Chinese, Japanese, and Korean) do not work properly with text-mode installation if framebuffer is not used. Other languages that require special fonts are probably also affected. The following solutions are available to work around this issue:
Use English or another non-CJK language for installation. Later on the running system, switch to a CJK language on the running system using YaST -> System -> Language.
If you must use a CJK language during the installation, do not select text-mode in the boot loader screen using <F3>, but select one of the other VGA modes instead. Then select the wanted CJK language using <F2> and add textmode=1 to the boot loader command-line. Now press Installation.
Use the graphical installation or install over SSH or VNC.
For SUSE Linux Enterprise Desktop 10 documentation, see http://www.suse.com/documentation/sled10/.
Most sled-* packages with the system documentation are split. Find the PDFs in the *-pdf sub-packages or directly at http://www.suse.com/documentation/sled10/.
The names of the boot prompt parameters given in the manual are obsolete and will get discontinued in SUSE Linux Enterprise 11. Instead of smturl use regurl and instead of smtcert use regcert.
By default, Firefox does not honor settings made with the GConf system. In order to make the GConf lockdown keys effective, edit /usr/lib/firefox/local-configuration.js and set config.use_system_prefs to true. This file allows the administrator to set and lock preferences that will apply to every Firefox user.
There is only limited graphics support on IBM SurePOS 700 4800-7X3 systems with 4820-2GN monitors. During a graphical installation you can encounter an error message from the monitor (OSD = On Screen Display) such as:
OUT OF RANGE H: -48.4 KHz V: -60.1 Hz.
To work around this issue try a different resolution, VESA or text-mode for installation. Another option is to choose the native driver by specifying acceleratedx=1 on the boot prompt. It might also help to update the BIOS.
After system installation the problem does not occur any longer and the graphics system is fully supported.
On the FIC GE2 platform when using 24 BPP color depth and resolutions >= 1280x1024 on the DVI interface stripes are displayed on the X server. This distorts all windows.
Changing to 16 BPP color depth seems to solve the problem.
Currently, Tablet PC support is only available for 32-bit architectures. To use Tablet PC features on 64-bit architectures, you need to install a 32-bit system.
The update to Firefox 3 requires some additional packages to be installed. Some libraries used by Firefox3 will be installed under /usr/lib/firefox/ as a second stack. Those libraries are only used by Firefox3.
Technical Instruction Document 7008357 (http://www.novell.com/support/documentLink.do?externalID=7008357) contains additional documentation for upgrading an installed system to SUSE Linux Enterprise Desktop 10.
If Novell Client 2.0 SP1 is installed on SLED 10 SP1 or SP2 and you upgrade to SLED 10 SP3, some undesired files and directories will not get removed. These files and directories prevent users from logging into the system using the Greeter screen as the Gnome Session Manager crashes.
Login as root and run the following commands either before or after the upgrade:
cd /home rm -f `find . -name "ncl*.desktop" -print` rmdir `find . -name "ncl*.desktop" -print` cd /root rm -f `find . -name "ncl*.desktop" -print` rmdir `find . -name "ncl*.desktop" -print` rm -f /etc/profile.d/novell-ncl-tray.sh
After executing these commands there is an additional issue with NCL 2.0 SP1 running on SLED 10 SP3. ncl_tray does not autostart, however it can be started manually. The recommendation is to upgrade to NCL 2.0 SP3.
For updating from SP1 to SP2 using YaST online update, zen-updater, or rug, we recommend to apply the slesp1-libzypp-4907 patch first.
This patch fixes the restart of ZMD during updating the maintenance stack itself. If the patch is not applied first (and ZMD restarted afterwards), you encounter issues during the update to SP2, such issues as thrown exceptions, etc.
For more information about the update procedure, see the manual.
Before starting the PatchCD update, add additional installation sources for all add-on products and KMP packages (such as nVidia or ATi graphics drivers) to match the Service Pack level to be installed. Use the YaST 'Installation Source' module for this. Otherwise, the PatchCD update might show dependency conflicts due to installing updated packages, e.g. the kernel packages.
The .local top level domain is treated as link-local domain by the resolver. DNS requests are send as multicast DNS requests instead of normal DNS requests. If you already use the .local domain in your nameserver configuration, you must switch this option off in /etc/host.conf. Also read the host.conf manual page.
If you want to switch off MDNS during installation, use nomdns=1 as a boot parameter.
For more information on multicast DNS, see http://www.multicastdns.org.
Due to severe security issues we have dropped and removed Epiphany from SP4. We recommend to use another Web browsers, such as Firefox, instead.
Due to severe security issues we have dropped and removed RealPlayer from SP4.
YaST comes with two front-ends depending on the desktop installed on your system. By default, the YaST gtk front-end runs on the GNOME desktop, and the YaST qt front-end on the other desktops. This is defined with the WANT_UI variable in the /sbin/yast2 script. Feature-wise, the gtk front-end is very similar to the qt front-end described in the manuals. One exception is the gtk software management module, which differs considerably from the qt port.
yast2-add-on-creator creates a custom product (ISO image) from plain RPM files. It is intended for ISVs who want to create extensions for SUSE Linux Enterprise products.
yast2-cd-creator creates a (bootable) ISO image from existing product(s). It can be used for customizing an existing product. For example, it can create a smaller ISO image with a subset of all packages (e.g., basic packages for a minimal system), or, the other way around, an ISO image with more products such as SLES + SDK.
yast2-product-creator is a successor of the cd-creator. It includes a GUI for the kiwi imaging system. This way it is also possible to create a Live-CD, XEN image, etc. from the same configuration used in the CD creator. The product creator will get shipped together with the SDK.
Note, the cd-creator does not support YUM installation sources, but the forthcomming product-creator (part of SDK) will do. If you want to create a medium with updates included, use the product-creator.
You can enable read-write support for the Microsoft NTFS file system. Mount a NTFS partition using ntfs-3g as the file system type. For example, enter on the command-line:
mount -t ntfs-3g /dev/sda1 /mnt
If you want to mount a NTFS partition permantently with read-write support, add a line to the /etc/fstab to mount it automatically at boot-time (create the mount point first!):
/dev/sda1 /data-ntfs ntfs-3g defaults 0 0
A more complete example would be:
/dev/sda1 /data-ntfs ntfs-3g \ users,gid=users,fmask=113,dmask=002,locale=en_US.UTF-8 0 0
This would give authenticated users write access to the partition, read access for everyone else. It also gives an example of the proper use of locale if necessary. Using default for an option opens the partition wide, even for abuse.
The Sun Java plug-in crashes Firefox on the first run. To work around this issue, restart Firefox after this first crash. Then Firefox will run properly.
Novell, Inc. makes no representations or warranties with respect to the contents or use of this documentation, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to revise this publication and to make changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes.
Further, Novell, Inc. makes no representations or warranties with respect to any software, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to make changes to any and all parts of Novell software, at any time, without any obligation to notify any person or entity of such changes.
Any products or technical information provided under this Agreement may be subject to U.S. export controls and the trade laws of other countries. You agree to comply with all export control regulations and to obtain any required licenses or classification to export, re-export, or import deliverables. You agree not to export or re-export to entities on the current U.S. export exclusion lists or to any embargoed or terrorist countries as specified in the U.S. export laws. You agree to not use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses. Please refer to http://www.novell.com/info/exports/ for more information on exporting Novell software. Novell assumes no responsibility for your failure to obtain any necessary export approvals.
Copyright ® 2013 Novell, Inc. All rights reserved. No part of this publication may be reproduced, photocopied, stored on a retrieval system, or transmitted without the express written consent of the publisher.
Novell, Inc. has intellectual property rights relating to technology embodied in the product that is described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S. patents listed at http://www.novell.com/company/legal/patents and one or more additional patents or pending patent applications in the U.S. and in other countries.
For Novell trademarks, see Novell Trademark ad Service Mark list (http://www.novell.com/company/legal/trademarks/tmlist.html). All third-party trademarks are the property of their respective owners.