Log into the NOWS SBE console.
Click
> , then scroll down to and click .Click
, then click . The following network specifications are automatically configured:Virtual IP Address Network: Virtual IP network range (such as 192.168.1.0) to use for VPN network or automatic network detection.
VPN Network Mask: Network mask (such as 225.225.255.0) of the VPN network or auto for automatic detection.
Allow VPN Clients Access to Internal Network: This determines whether to allow VPN clients to route through the VPN server to the internal network or not.
Review the settings of the installation. To make a change, click
. To proceed with the installation, click , then clickProceed to Section 16.3, Post-Installation.
OpenVPN is now listed on the installed software list and can be administered from the OpenVPN administration page. If your installation fails, see Section 16.1.1, Manually Configuring VPN.
If you are using SUSEĀ® Linux Enterprise Desktop (SLED) 10 and your VPN installation fails, you must configure VPN access manually.
Log into the NOWS SBE console.
Click the
icon > > > > > > > , then press Ctrl+L.In the ~/.keys.
field, typeClick
.Select your .pcf file.
Click
> .You should now have VPN access.