You must satisfy the following prerequisites in order to install and use either iManager or iManager Workstation.
The following prerequisites apply to all server platforms:
eDirectory Management: iManager 2.7.6 can manage any server running Novell eDirectory 8.8 or later.
Admin-Equivalent Rights: You must have admin-equivalent rights for the creation of a Role-Based Services (RBS) collection in the eDirectory tree, and to run the iManager RBS Configuration Wizard.
File System Rights: You must have root access for Linux servers or Administrator access for Windows servers.
In addition to the general prerequisites listed in Section 1.2.1, General Prerequisites, the following prerequisites also apply to installing iManager on all Linux server platforms:
Required Linux Packages: If any of the following packages are not installed, you must obtain them from the vendor of your Linux distribution and install them before installing iManager. They should be on your installation CDs.
SUSE Linux Enterprise Server (SLES) 64-bit
libstdc++33‐32bit (SLES 11)
libstdc++43‐32bit (for SLES 11 SP1)
libstdc++46‐32bit (for SLES 11 SP2)
libstdc++33‐32bit (SLES 10 SP3)
compat‐lsb (SLES 10)
SUSE Linux Enterprise Server (SLES) 32-bit
libstdc++33 (SLES 11)
libstdc++43 (SLES 11)
compat‐lsb (SLES 10)
IMPORTANT:While installing iManager on a Redhat 64-bit version, ensure that the 32-bit versions of the RHEL libraries are also installed.
RHEL
compat‐libstdc++‐33 (RHEL 5)
compat-libstdc++-33-*.el6.i686.rpm (RHEL 6 32-bit)
compat-libstdc++-33-*.el6.i686.rpm (RHEL 6 64-bit)
compat-libstdc++-33-*.el6.x86_64.rpm (RHEL 6 64-bit)
libstdc++-4.4.*.el6.i686.rpm (RHEL 6 64-bit)
libstdc++-4.4.*.el6.x86_64.rpm (RHEL 6 64-bit for GUI installation mode)
glibc-2.12-*.el6.i686 (RHEL 6 64-bit)
libXau-*.el6.i686.rpm (RHEL 6 64-bit)
libxcb-*.el6.i686.rpm (RHEL 6 64-bit))
libX11-*.el6.i686.rpm (RHEL 6 64-bit)
libXext-*.el6.i686.rpm (RHEL 6 64-bit)
libXi-*.el6.i686.rpm (RHEL 6 64-bit)
libXtst-*.el6.i686.rpm (RHEL 6 64-bit)
libstdc++-*.el6.i686.rpm (RHEL 6 64-bit)
libgcc-*.el6.i686.rpm (RHEL 6 64-bit)
NOTE:If you are using PKI plug-in, you must install the following RPMs on the iManager server:
SLES 10 32-bit: compat (compat-2006.1.25-11.2)
SLES 10 64-bit: compat-32bit (compat-32-bit-2006.1.25-11.2)
SLES 11 32-bit: compat (compat-2009.1.19-2.1)
SLES 11 64-bit: compat-32bit (compat-32bit-2009.1.19-2.1)
Previous Versions of iManager: If you have installed iManager 2.7.x, you do not need to uninstall it. See Section 2.0, Upgrading iManager for more information.
Processor: Pentium* III 600MHz or higher processor
Disk Space: 200 MB hard-disk space for a local installation
Memory: 512 MB RAM (1024 MB recommended)
Port Setup: Be aware of possible port conflicts. Tomcat is installed as part of the iManager 2.7.6 installation, which determines whether the default ports are in use. If they are in use, the install prompts you for different ports for use by Tomcat. By default, Tomcat uses ports 8080, 8443, and 9009.
IMPORTANT:On Linux, iManager is supported only with the version of Tomcat that is installed with iManager.
In addition to the general prerequisites listed in Section 1.2.1, General Prerequisites, the following prerequisites also apply to installing iManager on all Windows platforms:
Previous versions of iManager: If you have installed iManager 2.7.x, you do not need to uninstall it. See Section 2.0, Upgrading iManager for more information.
Web Services: iManager uses Tomcat on Windows servers. It does not provide any integration with IIS or Apache environments. However, following the iManager 2.7 installation, you can manually integrate iManager with your existing Web server infrastructure, if desired.
Processor: Pentium III 600 MHz or higher processor
Disk Space: 500 MB minimum for a local installation
Memory: 512 MB of RAM (1024 MB recommended)
In addition to the general prerequisites listed in Section 1.2.1, General Prerequisites, the following prerequisites also apply to installing iManager Workstation on Linux Clients:
Required Linux Packages: If any of the following packages are not installed, you must obtain them from the vendor of your Linux distribution and install them before installing iManager. They should be on your installation CDs.
GTK2
GLIBC 2.3
libstd++33
SLED (SUSE Linux Enterprise Desktop (SLED)) 11 32-bit
SLED 11 SP1 32-bit
openSUSE 11.0 32-bit
openSUSE 11.1 32-bit
openSUSE 11.2 32-bit
openSUSE 11.3 32-bit
openSUSE 12.1
libstd++33-32 bit
SLED 11 64-bit
SLED 11 SP1 64-bit
openSUSE 11.0 64-bit
openSUSE 11.1 64-bit
openSUSE 11.2 64-bit
openSUSE 11.3 64-bit
Processor: Pentium III 600 MHz or higher processor
Disk Space: 200 MB minimum
Memory Requirements: 256 MB RAM (512 MB recommended)
IMPORTANT:Do not run iManager Workstation from a path that contains spaces.