You can create a new post office on the same GroupWise volume where its domain resides or on a separate GroupWise volume. If the post office and its domain are on the same GroupWise volume, they fail over together. If they are on separate GroupWise volumes, they fail over separately.
To create a new post office in a clustering environment:
If you marked Yes for Post Office on Same Volume as Domain? (under System Clustering Worksheet item 7), map a drive to the GroupWise volume for the domain (System Clustering Worksheet item 7).
or
Map a drive to the GroupWise volume for the post office (System Clustering Worksheet item 8).
The GroupWise volume name will be cluster_volume. For assistance with mapping a drive to a cluster-enabled volume, see Configuring Short Name Resolution.
Manually create the post office directory (System Clustering Worksheet item 12).
This step is not required, but in a clustered environment, Step 4 is easier if the post office directory already exists.
In ConsoleOne, connect to the GroupWise domain where you want to create the new post office, as described in Connecting to a Domain
in Domains
in the GroupWise 7 Administration Guide.
Create the new post office, following the steps provided in Creating the New Post Office
in Post Offices
in the GroupWise 7 Administration Guide. Keep in mind the following cluster-specific details:
Use the Post Office Worksheet you filled out in Section 2.4, Planning a New Clustered Post Office to fill in the fields in the Create GroupWise Post Office dialog box.
In the Step 1 to the post office directory you created in Step 2 above.
field, be sure to browse through the drive you mapped inIf you want to create a library at the post office (System Clustering Worksheet item 14), select .
This option creates the document storage area for the library under the post office directory and is not recommended for large libraries.
The Planning Secondary IP Addresses and Cluster-Unique Port Numbers for Agents in the Cluster for the secondary IP address and cluster-unique port numbers that you need to specify in order to configure the link.
option is selected by default. Select . Refer to the Agent Clustering Worksheet that you filled in duringRight-click the new Post Office object, then click
.Click
; in the field, select .Right-click the new POA object, then click
.On the POA Agent Settings and Scheduled Events pages, you might want to specify unique times for the following POA activities to prevent multiple POAs from performing the same activities on the same node at the same time during a failover situation:
Start User Upkeep
Generate Address Book for Remote
Enable QuickFinder Indexing
Mailbox/Library Maintenance Event
For more information about these repetitive POA activities, see Performing Nightly User Upkeep
, Regulating Indexing
, and Scheduling Database Maintenance
in Post Office Agent
in the GroupWise 7 Administration Guide.
Make sure you are still connected to the domain that owns the new post office.
Rebuild the post office database for the new post office, following the steps provided in Rebuilding Domain or Post Office Databases
in Databases
in the GroupWise 7 Administration Guide. Be sure to browse to the database location (under System Clustering Worksheet item 11) through the virtual server that was created when you cluster-enabled the GroupWise volume.
The database rebuild is necessary in order to transfer the POA configuration information and the post office link information into the post office database, because the POA for the new post office is not yet running.
If you want to create a library with its document storage area outside the post office directory, (System Clustering Worksheet item 14), follow the steps in Setting Up a Basic Library
or Setting Up a Full-Service Library
in Libraries and Documents
in the GroupWise 7 Administration Guide, after you have completely finished setting up the clustered post office.
Continue with Installing and Configuring the MTA and the POA in a Cluster.