The -dump mode command provides information about the device’s hard drives and partitions.
To use the Dump mode:
To display the ZENworks Imaging Engine menu, enter:
img
Click
, then click .Information concerning the hard drives and partitions is displayed.
Using the imaging maintenance mode prompt, the following example explains the syntax and available parameters that you can use with the Dump (-dump) mode command:
img -dump [-geo]
where the -geo parameter is optional.
You can abbreviate -dump -geo as ‑dg.
For more information, see:
Table E-14 Dump Mode Commands and Parameters
Parameter |
Action |
---|---|
-dump |
Lists the existing partitions on all local hard drives. For each partition, the type, size, and slot number of the partition are given. The ZENworks partition and Dell or Compaq configuration partitions are not listed. |
-geo |
Displays additional information about the geometry (cylinders, heads, and sectors) and capacity of each hard drive. |
Table E-15 Dump Mode Examples
Example |
Explanation |
---|---|
img -dump |
Lists the current partitions on all local writable devices. |
img -dump ‑geo |
Lists all hard drives, their geometry and capacity, and the current partitions on the writable devices. |