Changing the severity level for a local log from the Centralized Message Logging setting in Novell Control Center is not taking effect
Severity:
ZENworks Linux Management; Event Monitoring
Possible Cause:
The Debug and Above message severity set using the command line interface takes precedence over the severity defined using the Centralized Message Logging user interface.
Action:
Turn off the Debug and Above severity from command line interface using the following command:
set debug-level off
SMTP mail is not working for the GMail server
Severity:
ZENworks Linux Management; Event Monitoring
Possible Cause:
The Event Monitoring component of ZENworks 7.2 Linux Management does not support SMTP on a Transport Layer Security (TLS) server.
Action:
For the GMail server, use only SMTP and Secure SMTP servers.
Unable to send e-mail to the specified e-mail address
Severity:
ZENworks Linux Management; Event Monitoring
Possible Cause:
You might have defined filters or relays on the SMTP server.
Action:
Clear the filters or relay that you have defined that block the SMTP packets from the ZENworks 7.2 Linux Management server.
Possible Cause:
The authentication information you have provided in the E-mail Notification section of the Centralized Message Logging page is not correct.
Action:
Ensure that the username and password you have specified are correct.
I am receiving unknown traps on the trap console
Severity:
ZENworks Linux Management; Event Monitoring
Possible Cause:
The messagelogger.mib file is not compiled on the server.
Action:
Compile the messagelogger.mib file located at /opt/novell/zenworks/share/messagelogger.
For example, if you want to compile messagelogger.mib on the Management and Monitoring Services console of ZENworks 7 Server Management, do the following:
-
Right-click the ConsoleOne® Site Serve object, then click .
-
In Properties of name of the Site Server dialog box, select the page.
-
Click .
-
In the dialog box, click , then select the MIB that needs to be compiled.
-
Click.
Unable to send the traps to the trap console
Severity:
ZENworks Linux Management; Event Monitoring
Possible Cause:
You might have defined filters on the trap console.
Action:
Clear the filters you have defined that block the traps generated from ZENworks 7.2 Linux Management server.
Possible Cause:
The port number you have specified is not correct.
Action:
To specify the correct port number:
-
In the ZENworks Control Center, click.
-
In, click .
-
Specify the correct SNMP port number of the trap console in the section.