5.9 Directed Broadcast Forwarding

A directed broadcast is a broadcast intended for all nodes on a nonlocal network. For example, the broadcast address 255.255.255.255 reaches all nodes on a network; the directed broadcast address 128.1.255.255 is intended for all nodes whose network address is 128.1.0.0. A router not directly attached to 128.1.0.0 simply forwards the directed broadcast packet to the next hop. A router on network 128.1.0.0—if it has directed broadcast forwarding enabled—accepts and forwards the packet to all nodes whose network address is 128.1.0.0. Routers connecting subnets of 128.1.0.0 also accept and forward the packet to the nodes on their respective subnets.

IMPORTANT:For all nodes on network 128.1.0.0 to receive the directed broadcast, each router attached to network 128.1.0.0 must have Directed Broadcast Forwarding enabled.

5.9.1 Enabling Directed Broadcast Forwarding

Using Novell Remote Manager

  1. Log in to Novell Remote Manager, then click Configure TCPIP > Start TCP/IP Configuration > Configure TCP/IP.

  2. Set Directed Broadcast Forwarding to Enabled.

  3. Click Save.

    The system displays a TCP/IP Configuration Successful message.

  4. Click OK to return to the TCP/IP Configuration Menu window.

  5. If you want these changes to take effect immediately, click Reinitialize Options.

Using INETCFG

  1. Load INETCFG, then select Protocols > TCP/IP > Expert Configuration Options.

  2. Select Directed Broadcast Forwarding > Enabled.

  3. Press Esc until you are prompted to save your changes, then select Yes.

  4. Press Esc to return to the Internetworking Configuration menu.

  5. If you want these changes to take effect immediately, select Reinitialize System > Yes.