Your OES 11 server is pre-configured with the eDirectory users shown in Figure 3-2.
Figure 3-2 The Pre-configured eDirectory Tree and the Users That It Contains
Importing users to Filr is accomplished by setting up LDAP synchronization with the eDirectory tree as follows:
Using your administrative browser, access Filr through the following URL:
https://192.168.1.110:8443
If prompted, accept and trust the certificate.
Sign in as User: admin with Password: admin.
When prompted, change the password to novellfilr.
Click
(upper right), then select .Under
, click .Click
>In the ldaps://192.168.1.100.
field, typeThis is the IP address of the OES server (oes-11 in Figure 3-2).
In the cn=admin,o=filr-lab.
field, typeThis is the eDirectory tree Admin (Figure 3-2).
In the novellfilr.
field, typeIn the GUID.
field, typeIn the uid with cn.
field replaceSkip to the ou=users,ou=dev,o=filr-lab.
field, then typeThis is the location of users Figure 3-2).
and in the eDirectory tree (Click
to enter the next .Create Base DN entries for the following, clicking
for each entry.ou=users,ou=is,o=filr-lab
ou=users,ou=mrktg,o=filr-lab
ou=users,ou=sales,o=filr-lab
Select the following options:
Select the following options for User synchronization:
Click
.The eight users in the four USERS containers are added.
Do not close the Administration Console. Continue with Section 3.6, Setting Up Users’ My Files Folders.
For complete instructions on using Filr LDAP synchronization, see Synchronizing Users and Groups from an LDAP Directory,
in the Novell Filr 1.0 Administration Guide.