Before upgrading the media format of your NSS volumes, make sure you understand the following guidelines:
The NSS media upgrade for enhanced hard links support is available for the following operating platforms (and later versions):
Novell Open Enterprise Server 2 Linux and NetWare
Novell Open Enterprise Server 1 SP1 NetWare
NetWare® 6.5 SP4
If the NSS volume is used in a cluster with Novell Cluster Services™, all nodes in the cluster must be upgraded to a supported platform before you upgrade the media format for any shared volumes.
The media upgrade is not available on OES 1 Linux, NetWare 6.5 SP3, and earlier versions. In a mixed-version cluster, the version of NSS must be able to be loaded on any of the platforms. After you upgrade the media format on an NSS volume, it cannot be mounted on an unsupported platform.
With a few exceptions as noted below, it is highly recommended that you upgrade the NSS volume to the new metadata structure after you upgrade the operating system to a supported platform.
Do not upgrade the media format of the NSS volume to the new metadata structure if any of the following conditions exist:
You have not yet verified that your system is performing as expected after upgrading the operating system, and you might need to roll back to an earlier release.
You plan to migrate one or more devices containing the NSS volume to an unsupported platform.
You need to share this volume with a mixed cluster with Novell Cluster Services where there are some unsupported platforms in the mix. The cluster software prevents the media upgrade unless all operating systems in the cluster support the new media format.
When you upgrade the operating system, NSS does not automatically upgrade the media format to use the new metadata structure. This allows you to the opportunity to roll back to the previous release if necessary. Before you upgrade the media format of NSS volumes to the new data structure, make sure the server is performing as expected.
WARNING:After the media format is upgraded to the new metadata structure, you cannot roll back to a previous release.
Until you upgrade the media format for enhanced hard link support, any existing hard links on the NSS volume are visible, and they can be opened, closed, read, and written. However, you cannot create new hard links, and you cannot rename or delete existing hard links. Attempts to do so are rejected with an appropriate error.
If you attempt to upgrade the media format for a shared NSS volume on a cluster with Novell Cluster Services, the upgrade is refused until all servers on the system are configured with a supported operating system. Make sure to upgrade all cluster nodes to a supported platform before attempting to upgrade the shared volume.
After you upgrade the volume to use the media format with enhanced hard links, the following constraints apply for its use:
The Hard Links attribute must be enabled for the upgraded NSS volume before you can create hard links.
When you upgrade the NSS volume to use the new media format, if any old-style hard links are detected, the Hard Links attribute is automatically enabled. Otherwise, the volume is upgraded, but the attribute is disabled and must be enabled before you can create hard links. For information, see Section 27.3, Enabling or Disabling the Hard Links Attribute.
The upgraded NSS volume cannot be rolled back to use the old media format.
You cannot roll back the operating system to a previous version.
You cannot migrate a device containing the upgraded volume to a system with an unsupported operating system.
Only nodes that have a supported operating system can be added to a cluster where shared volumes use the upgraded media format.
If you do not upgrade the media format for an NSS volume, the volume’s format uses the same metadata structure as is used on earlier releases. Any existing hard links on your system’s NSS volumes are visible, and they can be opened, closed, read, and written. However, until you upgrade the NSS volume to the new structure, you cannot create new hard links, and you cannot rename or delete existing hard links. Attempts to do so are rejected with an appropriate error.
If the non-upgraded NSS volume is shared in a mixed cluster with Novell Cluster Services, hard links can be created, renamed, or deleted by first mounting the volume on a node in the cluster with an operating system that is compatible with the old media format.
It is possible to move devices that contain non-upgraded NSS volumes cross-platform to servers with operating systems compatible with the old media format. For information about moving media cross-platform, see Section 11.2, Moving Non-Clustered Devices From NetWare Servers to OES 2 Linux Servers.