NSS on OES supports the O_NOATIME option for the Linux open(2) command, and the noatime and nodiratime options for the mount and nfsmount command and the /etc/fstab file. These options have the same objective—that is, to prevent the access time from being updated unless the access involves a modification of a file’s or directory’s metadata or content.
noatime: Disables the updating of access time for both files and directories so that reading a file does not update their access time (atime).
nodiratime: Disables updating of access time when opening directories so that the access time is not modified when enumerating directories. This routine also checks that the object is a directory, which slows down the routine.
These options are useful for backup, news servers, and mail servers where the extra disk activity associated with updating the access time is not desired. Avoiding the writes associated with updating the access time can result in measurable performance gains.
IMPORTANT:Typically, you need to use only the noatime option so that atime is not updated for the accessed file and its directory when the file is accessed. To determine if the noatime and nodiratime options can help the performance of a particular application, refer to the documentation and best practices for that application.
For information about applying these options, see the following:
By default, the open command updates the access time whenever a file is opened or a directory is accessed. The O_NOATIME option disables the updating of access time, so that reading a file does not update its access time. Using this option allows you to back up a volume without modifying the access times (ATIME) of its files.
The man page for the open(2) command defines the O_NOATIME option as follows:
(Since Linux 2.6.8) Do not update the file last access time when the file is read. This flag is intended for use by indexing or backup programs, where its use can significantly reduce the amount of disk activity.
For information about how to use the O_NOATIME option, see the man page for the Linux open(2) command by entering man 2 open at a terminal console prompt.
The noatime and nodiratime options for the mount command are available for all Linux file systems, including NSS.
IMPORTANT:Typically, you need to use only the noatime option so that atime is not updated for the accessed file and its directory when the file is accessed. To determine if the noatime and nodiratime options can help the performance of a particular application, refer to the documentation and best practices for that application.
To enable noatime or nodiratime options when mounting an NSS volume:
Open a terminal console on the server, then log in as the root user.
At the terminal console prompt, enter (all on the same line, of course):
mount -t nssvol VOL vol_mountpoint -o name=volname,noatime
or
mount -t nssvol VOL vol_mountpoint -o name=volname,nodiratime
Replace vol_mountpoint with the mount point for the volume, such as /media/nss/NSSV1. Replace volname with the name of the volume, such as NSSV1.
For example, enter:
mount -t nssvol VOL /media/nss/NSSV1 -o name=NSSV1,noatime
This command mounts the volume NSSV1 with the noatime option so that the file and directory access times are not updated when a file is accessed but not modified.
In YaST, click Network Services > NFS Server > NFS Mount.
Specify the volume, then enter
rw,no_root_squash,sync,fsid=value,noatime
For information about the other nfsmount options used here, see Section 19.16, Exporting and Importing NSS Volumes for NFS Access.
Click OK.
The noatime and nodiratime options are available as mount options in the /etc/fstab file for all Linux file systems, including NSS. To enable the noatime and nodiratime options as default mounting options for a volume so they are in effect at boot time, modify the entry for the NSS volume in the /etc/fstab file.
Open the /etc/fstab file in a text editor.
Modify the entry for the NSS volume by adding noatime or nodiratime as options.
For example, type
volname vol_mountpoint nssvol noauto,rw,name=volname,noatime 0 0
Replace volname with the name of the volume, such as NSSV1. Replace vol_mountpoint with the mount location of the NSS volume, such as /media/nss/NSSV1.
For example (all on the same line, of course):
NSSV1 /media/nss/NSSV1 nssvol noauto,rw,name=NSSV1,noatime 0 0
Save the file.
Reboot the server to apply the changes.