A driver set is a container that holds Identity Manager drivers. Only one driver set can be active on a server at a time. As a result, all active drivers must be grouped into the same driver set. To view or change settings, double-click a driver set in the Modeler.
When you create an Identity Vault, a driver set is added to the vault by default.
Figure 9-4 A Driver Set in an Identity Vault
You can add other driver sets by dragging the Driver Set object from the palette to the Modeler.
From the
page, you can specify or change driver set values.Figure 9-5 Driver Set Properties
Table 9-3 Driver Set Settings
Field |
Description |
---|---|
Name |
The name of the Driver Set object (for example, DriverSet1.) |
|
We recommend that you select this option. For details, see Planning the Technical Details of your Identity Manager Implementation |
|
The Identity Vault assigns the default DN container value to all driver sets. If you specify a DN container here on the Driver Set object, that setting takes precedence over the Identity Vault setting. You can manually enter this value or browse for it. |
Global configuration values (GCVs) are settings that are similar to driver parameters. Global configuration values can be specified for a driver set as well as an individual driver. If a driver does not have a GCV, the driver inherits the value for that GCV from the driver set.
GCVs allow you to specify settings for Identity Manager features such as password synchronization and driver heartbeat, as well as settings that are specific to the function of an individual driver configuration. Some GCVs are provided with the drivers, but you can also add your own. You can refer to these values in a policy to help you customize your driver configuration.
To view or change the driver set's GCV settings, double-click the driver set. From the Global Configuration Values page, you can add, edit, or remove values, or edit the XML file for the driver set.
The Driver Set Trace.
options enable you to view high-level information. For lower-level information, useFigure 9-6 Driver Set Options for Logging
By default, logging is turned off. To track errors, messages, or events, change the default.
Double-click the driver set.
Select
Select a logging option.
The log option that you select determines which messages are available in the log.
To configure audit instrumentation, select
, click the event selector button, select events, then click .The
option updates the time stamp to indicate the last activity of the driver.Specify the number of entries in the log.
The default is 50 entries (lines) in the log. If you want a longer history, increase the number.
Save changes by clicking
.The driver set log contains messages from the engine when it tries to start or stop drivers. To view the log, use iManager. Select the
icon above the Identity Vault in the .After adding one or more servers to the Identity Vault, you can view or change the driver set’s server association.
Figure 9-7 Server List
Select a server in the Section 9.3, Configuring Identity Vaults.
list, then use the arrows to move the server to the list. If a server is not in the Available Server list, you must first add it by editing the Identity Vault properties. SeeAlthough a driver set has nothing to trace, you can add a trace level to your driver. The
setting specifies the trace level for all drivers in the driver set that use the driver set trace settings.With the trace level set, DSTRACE displays the Identity Manager (DirXML®) events as the engine processes the events. The trace level affects each driver in the driver set. Use the trace level for troubleshooting issues with the drivers when they are deployed. DSTRACE displays the output of the specified trace level.
Table 9-4 Driver Set Trace Settings
The following methods help you capture and save Identity Manager trace information.
Use dstrace.nlm to display trace messages on the system console or trace messages to a file ( sys:\system\dstrace.log). Dstrace.nlm displays the trace messages to a screen labeled DSTrace Console.
Use the following commands at the server console:
DSTRACE SCREEN ON: Allows trace messages to appear on the DSTRACE Console.
DSTRACE FILE ON: Captures trace messages sent to the DSTRACE Console to the dstrace.log file.
DSTRACE FILE OFF: Stops capture trace messages to the log file.
DSTRACE -ALL: Turns off all Trace flags.
DSTRACE +DXML DSTRACE +DVRS: Displays the Identity Manager (DirXML) events.
DSTRACE +TAGS DSTRACE +TIME: Displays the message tags and times tamps.
Open the Control Panel, select
, then click > . A window named NDS Server Trace Utility opens.To set the filters to capture the DirXML trace information:
Click
> > .Click the boxes next to
and , then click .To save the information to a file:
Click
> .A dialog box prompts for a filename.
Enter a filename with the extension of . log.
To stop capturing information, click
> .The file is saved.
Use the ndstrace command at the console to display the Identity Manager events. The exit command quits the trace utility.
Table 9-5 ndstrace Commands
Use iMonitor to get DSTRACE information from a Web browser.
Table 9-6 Platforms and Commands for Web Browsers
Platform |
Command |
---|---|
NetWare® |
ndsimon.nlm |
Windows |
ndsimon.dlm |
Linux/Solaris/AIX/HP-UX |
ndsimonitor |
Access iMonitor from http://server_ip:8008/nds (the default port).
Click
.Click
.Click
and .Click
, then click .Click the
document icon to view the live trace.