Upgrading the Driver Shim

NOTE:  Running an Identity Manager driver configuration with a DirXML 1.x driver shim is not supported.

When you upgrade, the new driver shim replaces the previous driver shim but keeps the previous driver's configuration. The new driver shim can run the DirXML 1.x configuration with no changes.

  1. Make sure you have updated your driver with all the patches for the version you are currently running.

    To help minimize upgrade issues, we recommend that you complete this step on all drivers.

  2. Install the new driver shim.

    You can do this at the same time that you install the DirXML engine, or you can do it after the engine is installed. See Installing the Driver Shim for Exchange.

  3. After the shim is installed, restart the driver.

    1. In iManager, select DirXML Management > Overview.

    2. Browse to the driver set where the driver exists.

    3. Select the driver that you want to restart, click the status icon, then select Start Driver.


      The icon for the driver[apos ]s drop-down list

  4. Activate the driver shim with your Identity Manager activation credentials.

    For information on activation, see "Activating Novell Identity Manager Products" in the Novell Nsure Identity Manager 2 Administration Guide.

After you install the driver shim, upgrade the driver configuration. See Upgrading the Driver Configuration.