1. In Designer, open your project.

2. In the Modeler, right-click the driver set where you want to create the driver, then select New > Driver to display the Driver Configuration Wizard.

3. In the Driver Configuration list, select Avaya PBX, then click Run.

4. On the Import Information Requested page, fill in the following fields:

   Driver Name: Specify a name that is unique within the driver set.

   Driver is Local/Remote: Select Local if this driver will run on the Metadirectory server without using the Remote Loader service. Select Remote if you want the driver to use the Remote Loader service, either locally on the Metadirectory server or remotely on another server.

5. (Conditional) If you chose to run the driver remotely, click Next, then fill in the fields listed below. Otherwise, skip to Step 6.

   Remote Host Name and Port: Specify the host name or IP address of the server where the driver’s Remote Loader service is running.

   Driver Password: Specify the driver object password that is defined in the Remote Loader service. The Remote Loader requires this password to authenticate to the Metadirectory server.

   Remote Password: Specify the Remote Loader’s password (as defined on the Remote Loader service). The Metadirectory engine (or Remote Loader shim) requires this password to authenticate to the Remote Loader

6. Click Next to import the driver configuration.

   At this point, the driver is created from the basic configuration file. To ensure that the driver works the way you want it to for your environment, you must review and modify the driver’s default configuration settings.

7. To review or modify the default configuration settings, click Configure, then continue with the next section, Configuring the Driver.

   or

   To skip the configuration settings at this time, click Close. When you are ready to configure the settings, continue with Configuring the Driver.

If you do not have the Driver Properties page displayed in Designer:

1. Open your project.

2. In the Modeler, right-click the driver icon or the driver line, then select Properties.

To set up emulation:

1. Configure the Emulation options on the driver parameters. For instructions, see Section A.1.5, Driver Parameters.

2. Modify the PBX Site object to change the Access Type to Emulate or AudixEmulate. You must do this in iManager:

   1. In iManager, click the View Objects icon to display the Identity Vault tree.

   2. Open the PBX Site container.

   3. Open the PBX Site object.

   4. In the Access Type list, select Emulate or AudixEmulate.

   5. Click OK to save your changes.

1. In Designer, open your project.

2. In the Modeler, right-click the driver icon or the driver line, then select Live > Deploy.

3. If you are authenticated to the Identity Vault, skip to Step 5; otherwise, specify the following information:

   • Host: Specify the IP address or DNS name of the server hosting the Identity Vault.

   • Username: Specify the DN of the user object used to authenticate to the Identity Vault.

   • Password: Specify the user’s password.

4. Click OK.

5. Read the deployment summary, then click Deploy.

6. Read the message, then click OK.

7. Click Define Security Equivalence to assign rights to the driver.

   The driver requires rights to objects within the Identity Vault. The Admin user object is most often used to supply these rights. However, you might want to create a DriversUser (for example) and assign security equivalence to that user. Whatever rights that the driver needs to have on the server, the DriversUser object must have the same security rights.

   1. Click Add, then browse to and select the object with the correct rights.

   2. Click OK twice.

8. Click Exclude Administrative Roles to exclude users that should not be synchronized.

   You should exclude any administrative User objects (for example, Admin and DriversUser) from synchronization.

   1. Click Add, then browse to and select the user object you want to exclude.

   2. Click OK.

   3. Repeat Step 8.a and Step 8.b for each object you want to exclude.

   4. Click OK.

9. Click OK.

1. In Designer, open your project.

2. In the Modeler, right-click the driver icon or the driver line, then select Live > Start Driver.