If you are doing an upgrade, you do not need to complete the first tasks. Instead, begin with Installing Novell JVM for NetWare .
To change or add TCP/IP information after installation, you need to load the INETCFG utility on the server. INETCFG might prompt you for permission to transfer text from AUTOEXEC.NCF to other text files in the SYS:\ETC directory. Enter Yes if this occurs, and then use the standard setup method instead of the quick method.
To configure the gateway address from INETCFG, complete the following:
From the Internetworking Configuration menu, select Protocols > TCP/IP.
Press the Down-arrow until Lan Static Routing is highlighted.
Select Lan Static Routing and press Enter.
Select Enabled and press Enter.
Select Lan Static Routing Table and press Enter.
Press Insert.
Select Route Type and press Enter.
Select Default Route and press Enter.
On the Next Hop Router on Route line, enter the IP address for your router.
On the Metric for this Route line, enter the number of hops to the router you selected.
Press Esc until Update Database appears.
Select Yes.
If your version of INETCFG lets you configure the DNS domain name and the addresses of DNS servers, the options will be under Protocols > TCP/IP > DNS Resolver Configuration.
If your INETCFG does not have this configuration option, from a client workstation, create a file called SYS:\ETC\RESOLV.CFG on the NetWare server with the following contents:
domain <your.domain.com>nameserver 001.01.01.01Where <your.domain.com> is the fully qualified domain name of your NetWare server, and where the entries for the name server are the IP addresses for the name servers on your network. You must enter the domain and name server parameters. You can have more than one name server line to search more than one domain name server.
Obtain the admin rights for the sys: volume of the servers by mapping a volume or logging in.
Run the Novell JVM for NetWare self-extracting executable file on the client.
This expands the archive and launches the InstallShield installation script.
At the Welcome screen, click next.
To accept the license agreement, click Yes; otherwise, click No.
Rejecting the license agreement stops the installation process.
At the Installation components screen, click Next.
At the Select Destination Servers screen, select the servers you want to install Novell JVM for NetWare on and click Next.
After reviewing the current settings profile, click Back to change the description of the servers. If you are satisfied with the profile, click Next.
InstallShield displays an installation progress bar.
The installation process copies the .zip file to the destination servers and unzips the file on each server.
The Readme document contains last-minute information about JVM for NetWare that is not in the HTML documentation.
When you install Novell JVM for NetWare, the NetWare GUI is automatically configured during the install. After the installation, you can load Novell JVM for NetWare and start the NetWare GUI.
load java
This loads Novell JVM for NetWare into memory and allows the command interpreter to recognize when a Java application or applet is launched.
startx
This first loads Novell JVM for NetWare-if it is not already loaded. It then starts the NetWare GUI. When the Novell button appears on the taskbar in the bottom left corner, the process is complete.
You can now launch Java applications and applets.
If you experience difficulties loading Novell JVM for NetWare, see Troubleshooting .