Make sure that all the recommended common hardware and software requirements listed in Meeting Basic ZfS Installation Requirements are met.
In addition to the basic ZfS installation requirements, the requirements listed for the following Server Inventory components must be met:
You can install the Inventory server on NetWare 5.1/6 or Windows NT/2000 servers.
IMPORTANT: NetWare 4.x, NetWare 5.0, Linux*, and Solaris* are not supported for the Inventory server.
The NetWare servers where you install the Inventory server must meet the following minimum system requirements:
Requirement | NetWare 5.1 | NetWare 6 |
---|---|---|
NetWare Support Pack Version |
5 For more information, see Installing NetWare 5.1 Support Pack 3 or 4. |
2 (or 3 if using JVM 1.4.1) |
eDirectory |
8 |
8 |
Server CPU Type |
Pentium* II |
Pentium II |
Server RAM |
256 MB; 512 MB is recommended |
512 MB |
Free Space for Inventory/Database Files |
50 MB for inventory with database; 25 MB for inventory alone |
50 MB for inventory with database; 25 MB for inventory alone |
Free Space for ConsoleOne Snap-Ins |
50 MB |
50 MB |
Miscellaneous |
Availability of a NetWare volume other than SYS: Valid IP address and IP Services installed |
Availability of a NetWare volume other than SYS: Valid IP address and IP Services installed |
The Windows servers where you install Inventory server must meet the following minimum system requirements:
Requirement | Windows NT Server | Windows 2000 Server |
---|---|---|
eDirectory |
8 |
8 |
Windows Service Pack Version |
6a For more information, see Installing Windows NT 4 Service Pack 6a. |
2 For more information, see Installing Windows 2000 Service Pack 3. |
Server RAM |
256 MB |
256 MB |
Server CPU Type |
200 MHz Pentium |
Pentium II or faster |
Free Space Inventory/Database for Files |
50 MB for inventory with database; 25 MB for inventory alone |
50 MB for inventory with database; 25 MB for inventory alone |
Free Space for ConsoleOne Snap-Ins |
50 MB |
50 MB |
Subscriber |
Object and software only (Server Inventory, Inventory Agent, and Remote Management) For more information, see Installing Policy and Distribution Services on NetWare and Windows Servers. |
Object and software only (Server Inventory, Inventory Agent, and Remote Management) For more information, see Installing Policy and Distribution Services on NetWare and Windows Servers. |
IMPORTANT: For Windows servers, the server's DNS short name must be the same as the server's name. Either rename Windows servers where the server's name does not match its DNS short name before running the installation, or do not select these servers for installing Server Inventory.
NOTE: Inventory database files should not be installed on an NFS-mounted volume of a NetWare server.
Component | Minimum Hardware and Software Requirements |
---|---|
Database Requirements |
Sybase is installed automatically when you choose to install the inventory database. (See Determining and Preparing the Database Server.)
Oracle can be used as an alternative to Sybase. See "Setting Up the Inventory Database for Oracle" in "Setting Up Server Inventory" in the Administration guide.
|
RAM Requirements |
|
Hard Disk Requirements |
|
You can install the Inventory Agent on NetWare 5.1/6 or Windows NT/2000 servers.
IMPORTANT: NetWare 4.x, NetWare 5.0, Linux, and Solaris are not supported for the Inventoried server.
The NetWare servers where you want to install the Inventory Agent must meet the following minimum system requirements:
Requirement | NetWare 5.1 | NetWare 6 |
---|---|---|
Support Pack Version |
5 For more information, see Installing NetWare 5.1 Support Pack 3 or 4. |
2 (or 3 if using JVM 1.4.1) |
eDirectory |
8 |
8 |
Server CPU Type |
Pentium II |
Pentium II |
Free Space for ConsoleOne Snap-Ins |
50 MB |
50 MB |
Inventory Data |
Not on SYS: volume |
Not on SYS: volume |
IP Address |
Valid address |
Valid address |
Server RAM |
256 MB (512 MB recommended) |
512 MB |
Subscriber |
Object and software only (Server Inventory, Inventory Agent, and Remote Management) For more information, see Installing Policy and Distribution Services on NetWare and Windows Servers. |
Object and software only (Server Inventory, Inventory Agent, and Remote Management) For more information, see Installing Policy and Distribution Services on NetWare and Windows Servers. |
The Windows servers where you want to install the Inventory Agent must meet the following minimum system requirements:
Requirement | Windows NT Server | Windows 2000 Server |
---|---|---|
Windows Service Pack Version |
6a For more information, see Installing Windows NT 4 Service Pack 6a. |
2 For more information, see Installing Windows 2000 Service Pack 3. |
eDirectory |
8 |
8 |
Server CPU Type |
200 MHz Pentium II |
200 MHz Pentium II |
Server RAM |
256 MB |
256 MB |
Free Space for Inventoried Server Files |
50 MB for inventory with database; 25 MB for inventory alone |
50 MB for inventory with database; 25 MB for inventory alone |
Free Space for ConsoleOne Snap-Ins |
50 MB |
50 MB |
Subscriber |
Object and software only (Server Inventory, Inventory Agent, and Remote Management) For more information, see Installing Policy and Distribution Services on NetWare and Windows Servers. |
Object and software only (Server Inventory, Inventory Agent, and Remote Management) For more information, see Installing Policy and Distribution Services on NetWare and Windows Servers. |
IMPORTANT: For Windows servers, the server's DNS short name must be the same as the server's name. Either rename Windows servers where the server's name does not match its DNS short name before running the installation, or do not select these servers for installing Server Inventory.